Nonaqueous capillary electrophoretic separation of basic enantiomers using octakis(2,3-O-dimethyl-6-O-sulfo)-gamma-cyclodextrin, a new, single-isomer chiral resolving agent

The enantiomers of 34 pharmaceutical weak-base analytes were separated by nonaqueous capillary electrophoresis in acidic methanol background electrolytes using the sodium salt of the new, single-isomer chiral resolving agent, octakis(2,3-O-dimethyl-6-O-sulfo)-gamma-cyclodextrin (ODMS). The effective mobilities, separation selectivities and peak resolution values of the weak-base analytes were determined as a function of the ODMS concentration in the 0-40 mM range and were found to follow the theoretical predictions of the charged resolving agent migration model (CHARM model) modified for ionic strength effects. Fast, efficient separations were achieved for both comparatively small and large enantiomers.     

Utility of certain pi-acceptors for the spectrophotometric determination of some penicillins

Two simple and sensitive spectrophotometric methods are described for the determination of six penicillin derivatives. The methods are based on the reaction of these drugs as n-electron donors with either 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) or 7,7,8,8-tetracyanoquinodimethane (TCNQ) as pi-acceptors, to give a highly coloured radical anion. The coloured products are quantified spectrophotometrically at 460 and 842 nm for DDQ and TCNQ, respectively. The optimization of the different experimental conditions is described. The interference from streptomycin sulphate and common degradation products was also studied. The proposed methods were applied successfully to the determination of the different penicillins investigated, either in pure or dosage forms, with good accuracy and precision. The results were compared with those given by the official United States Pharmacopeial XXI method.     

Estudios sobre ácidos hidroxámicos

Résumé On propose un procédé de microdosage des groupements méthoxyles dans les pectines, qui repose sur la libération de ces groupements par saponification de l'hydroxylamine alcoolique dans un appareil, sur leur transformation en formiates de méthyle et sur leur distillation. Le formiate de méthyle forme ainsi l'acide formhydroxamique que l'on dose par colorimétrie à l'état de chélate avec le fer-III.On réalise l'hydrolyse de la pectine à 100° C en tube scellé. On fait réagir avec l'acide formique en excès, une partie aliquote de l'hydrolysat dans le micro-appareil de distillation déjà décrit. Le procédé convient pour 1 à 3 mg de pectine et la durée des opérations est de deux heures et demies. Sa spécificité est satisfaisante bien que le groupe éthoxyle puisse gêner. Son action est d'ailleurs peu vraisemblable, puisqu'il ne fait pas partie de la molécule de pectine. Les résultats du procédé sont en générale un peu plus bas que ceux des méthodes volumétriques servant à ce dosage. On a étudié la reproductibilité pour les esters méthyliques et l'on a mis en évidence une erreur par défaut de 2 à 4%. Les plus petites quantités de groupes méthoxyles que l'on puisse doser sont de 20g. Le procédé recommandé est une application particulière de méthodes applicables de façon générale au dosage des esters méthyliques dans les substances organiques. Ce sera l'objet d'une autre communication de cette série.

---

Summary A micromethod is given for determining methoxyl groups in pectins. It is based of the liberation of these groups by saponification, conversion into methyl formate, and distillation of the latter into a receiver containing alcoholic hydroxylamine. The methyl formate reacts to give formhydroxamic acid, which is determined colorimetrically as iron(III) chelate.The hydrolysis of the pectin is conducted at 100° C in a sealed tube. An aliquot part of the hydrolysate is brought into reaction with excess formic acid in a microdistillation apparatus that was described previously. The procedure is suitable for 1 to 3 mg pectin and requires 21/2 hours for all partial operations. The specificity is satisfactory, even though ethoxyl may interfere. However, this latter is not likely to be encountered since ethoxyl has not been shown to be a constituent of the pectin molecule. The results given by the procedure are in general inferior to those of volumetric methods. The reproducibility was tested on methyl esters and showed a minus error of 2 to 4%. The smallest amount of methoxyl which can be determined in this way is 20g. The method proposed here is a special application of a method which can be applied in general to the determination of methyl esters in organic substances, which will be the subject of a later paper in this series.

---

Zusammenfassung Es wird ein Mikroverfahren zur Bestimmung der Methoxylgruppen in Pektinen angegeben, das auf der Freisetzung dieser Gruppen durch Verseifung, deren Umwandlung in Methylformiat und dessen Destillation in eine Vorlage von alkoholischem Hydroxylamin beruht. Das Methylformiat bildet damit Formhydroxamsäure, die als Eisen(III)-chelat kolorimetrisch bestimmt wird.Die Hydrolyse des Pektins wird bei 100° C in einem verschlossenen Rohr ausgeführt. Einen aliquoten Teil des Hydrolysates läßt man in einem schon früher beschriebenen Mikrodestillationsapparat mit überschüssiger Ameisensäure reagieren. Das Verfahren eignet sich für 1 bis 3 mg Pektin und erfordert für alle Teiloperationen 2^1/2 Stunden. Seine Spezifität ist befriedigend, obwohl Äthoxyl stören kann. Dessen Einwirkung ist jedoch wenig wahrscheinlich, da es nicht als Bestandteil des Pektinmoleküls nachgewiesen ist. Die Ergebnisse des Verfahrens sind im allgemeinen niedriger als die Resultate volumetrischer Methoden. Die Reproduzierbarkeit wurde an Methylestern überprüftund zeigte einen Minusfehler von 2 bis 4%. Die Mindestmenge bestimmbares Methoxyl beträgt 20g. Das vorgeschlagene Verfahren ist eine spezielle Anwendung einer allgemein für die Bestimmung von Methylestern in organischen Substanzen anwendbaren Methode, die Gegenstand einer weiteren Mitteilung dieser Serie sein wird.

---

Resumen Se indica una microtécnica de valoración de metoxilos en pectinas, basada en la liberación del radical metilo éster por saponificación; en su conversion en formiato de metilo y en su simultanea destilación y recepción en hidroxilamina alcalinizada. El formiato de metilo se transforma así en ácido formohidroxámico, cuya determinación fotocolorimétrica se realiza como quelato férrico.Estas operaciones requieren efectuar la hidrólisis de la pectina en tubo cerrado y a 100° C, y en tomar una alícuota del hidrolizado, que se pasa con un exceso de ácido fórmico al aparato de microdestilación, detallado en comunicaciones anteriores. El método permite operar con 1 a 3 mg de pectina y todas las operaciones insumen unas dos y media horas. La técnica presenta condiciones satisfactorias de especificidad, pudiendo interferir los radicales etoxilos, cosa poco probable, pues no son reconocidos como componente de la molécula de pectina. Los resultados obtenidos, comparados con los del método titrimétrico, son por lo general inferiores a éste y su reproducibilidad, verificada con ésteres metílicos, tiene errores por defecto de un 2 a 4%. La cantidad mínima de metoxilo valorado alcanza a 20g. La técnica que se indica, es una aplicacion particular de otra de carácter general, aplicable a la valoración de ésteres metílicos en sustancias orgánicas, que será motivo de otra futura comunicación de esta serie.

     

In situ assembled ZIF superstructures via an emulsion-free soft-templating approach

Assembling well-defined MOF superstructures remains challenging as it requires easily removable hard templates or readily available immiscible solutions for an emulsion-based soft-template approach. In this work, a single-step emulsion-free soft templating approach is reported to spontaneously prepare hollow ZIF-8 and ZIF-67 colloidosomes with no further purification. These superstructures can load different enzymes regardless of the size and charge with a high encapsulation efficiency of 99%. We envisage that this work will expand the repertoires of MOF superstructures by the judicious selection of precursors and the reaction medium.

An emulsion-free approach for the preparation of hollow ZIF-8 superstructures in a single step is established based on metal sulfate hydrates in methanol.     

Toward separation of nuclear spin isomers with coherent light.

We propose an approach for separating nuclear spin isomers with coherent light and illustrate it by numerical calculations using fulvene as a model system. The scheme employs the equivalence of torsion and interchange of equivalent H-atoms in a class of molecules of which fulvene is a simple example. The exchange symmetry couples with the rotational symmetry to produce a spatial distinction between the two photo-excited nuclear spin isomers, and wavepacket interferometry is applied to separate the species.     

The preparation of bis- and tris-(trimethylsilyl)acetic acid

Contrary to an earlier report, lithiation of tris(trimethylsilyl)methane followed by carbonation does not yield the acid (Me₃Si)₃CCO₂H, (I), if an alkali extraction step is included in the work up; the product is actually the acid (Me₃Si)₂CHCO₂H, (II). The acid (I) can be obtained if the alkali extraction is omitted. Separate experiments have confirmed that (I) is rapidly converted into (II) by aqueous or methanolic base.     

Metal-organic frameworks with exceptionally high capacity for storage of carbon dioxide at room temperature

Metal-organic frameworks (MOFs) show high CO2 storage capacity at room temperature. Gravimetric CO2 isotherms for MOF-2, MOF-505, Cu3(BTC)2, MOF-74, IRMOFs-11, -3, -6, and -1, and MOF-177 are reported up to 42 bar. Type I isotherms are found in all cases except for MOFs based on Zn4O(O2C)6 clusters, which reveal a sigmoidal isotherm (having a step). The various pressures of the isotherm steps correlate with increasing pore size, which indicates potential for gas separations. The amine functionality of the IRMOF-3 pore shows evidence of relatively increased affinity for CO2. Capacities qualitatively scale with surface area and range from 3.2 mmol/g for MOF-2 to 33.5 mmol/g (320 cm3(STP)/cm3, 147 wt %) for MOF-177, the highest CO2 capacity of any porous material reported.