Pure-silica optical waveguides, fiber couplers, and high-aspect ratio submicrometer channels for electrokinetic separation devices

A new fabrication procedure for integration of ultraviolet transparent pure-silica planar waveguides, fiber couplers and high-aspect ratio submicrometer channels is presented. Only a single photolithographic mask step is required. The channels are 80-90 microm deep and the width can be reduced to about 0.5 microm, corresponding to a height-to-width ratio of more than 150. The core of the waveguides consists of pure silicon dioxide, which is favorable over doped silica, due to the absence of absorption centers associated with the dopants. This furthermore improves the long-term stability of the waveguides, because of an increased radiation resistance of the glass. The propagation loss decreases from 1.0 dB/cm at 200 nm to 0.2 dB/cm at 800 nm, which, to our knowledge, is the lowest propagation loss reported for integrated planar waveguides in the ultraviolet wavelength region to date. The effective optical path length is 1.2 mm for an absorbance cell with a nominal length of 1.0 mm, indicating effective suppression of stray light. The limit of detection for paracetamol when present in the entire channel network was determined to 3 microg/mL. Finally, the applicability of the fabricated devices for capillary electrophoresis was evaluated by separation of caffein, paracetamol and ketoprofone using absorbance detection at 254 nm.     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

Mimicking the Structure and Function of DNA: Insights into DNA Stability and Replication

The physical and chemical factors that allow DNA to perform its functions in the cell have been studied for several decades. Recent advances in the synthesis and manipulation of DNA have allowed this field to move ahead especially rapidly during the past fifteen years. One of the most common chemical approaches to the study of interactions involving DNA has been the use of DNA base analogues in which functional groups are added, deleted, blocked, or rearranged. Here we describe a different strategy, in which the polar natural DNA bases are replaced by nonpolar aromatic molecules of the same size and shape. This allows the evaluation of polar interactions (such as hydrogen bonding) with little or no interference from steric effects. We have used these nonpolar nucleoside isosteres as probes of noncovalent interactions such as DNA base pairing and protein - DNA recognition. We have found that, while base-pairing selectivity does depend on Watson - Crick hydrogen bonding in the natural pairs, it is possible to design new bases that pair selectively and stably in the absence of hydrogen bonds. In addition, studies have been carried out with DNA polymerase enzymes to investigate the importance of Watson - Crick hydrogen bonding in enzymatic DNA replication. Surprisingly, this hydrogen bonding is not necessary for efficient enzymatic synthesis of a base pair, and significant levels of selectivity can arise from steric effects alone. These results may have significant impact both on the study of basic biomolecular interactions and in the design of new, functionally active biomolecules.     

ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

Microgravimetric study of electrochemically controlled nucleophilic addition of sulfite to polyaniline

The sulfonation of polyaniline (PANI) films by nucleophilic addition of sulfite ion has been controlled through the polymer oxidation state under electrochemical control. The process was monitored by in situ electrochemical quartz crystal microbalance (EQCM), and the polymer oxidation was accomplished by electrode potential steps in sulfite aqueous solutions. The nucleophilic addition of sulfite to PANI only takes place on the oxidized polymer. From the ratio of added mass to the injected charge, the degree of sulfonation has been obtained with a yield as high as 50%. It has been observed that the ion-exchange mechanism during the oxidation-reduction process in the resulting sulfonated polymer is analogous to the polymer produced by electrophilic sulfonation of polyaniline or by copolymerization of aniline with aminosulfonic acids, unlike the ionic exchange observed for unmodified PANI.     

Synthesis and Reactions of 5-Amino-3-(3-methyl-5-oxo-1-phenyl-2-pyrazolin-4-yl)-7-phenyl-7 H -thiazolo[3,2- a ]pyrimidine-6-carbonitrile

5-Amino-3-(3-methyl-5-oxo-1-phenyl-2-pyrazolin-4-yl)-7-phenyl-7H-thiazolo[3,2-a]pyrimidine-6-carbonitrile was synthesized via the reaction of 4-(2-aminothiazol-4-yl)-3-methyl-1-phenyl-2-pyrazolin-5-one with benzylidene malononitrile and was then transformed to related fused heterocyclic systems. The antifungal and antibacterial studies revealed in some cases excellent biocidal properties.     

Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

Detection of atmospheric nitrogen dioxide using a miniaturised fibre-optic spectroscopy system and the ambient sunlight

A miniaturised fibre-optic spectrometer based system is presented for direct detection of one of the major atmospheric pollutants, nitrogen dioxide, by absorption spectroscopy using the ambient sunlight as light source. The detection system consists of a 10 cm collimator assembly, a fibre-optic cable and a portable diode-array spectrometer. The absorbance spectrum of the open-path is calculated using a reference spectrum recorded when the nitrogen dioxide (NO2) concentration in the atmosphere is low. The relative concentration of the pollutant is calculated normalising the detected spectra and subtracting the background broadband spectrum from the specific NO2 absorbance features, since the broadband spectrum changes according to atmospheric conditions and solar intensity. Wavelengths between 400 and 500 nm are used in order to maximise sensitivity and to avoid interference from other species. Calibration is carried out using Tedlar sample bags of known concentration of the pollutant. A commercial differential optical absorption spectroscopy (DOAS) system is used as a reference standard detection system to compare the results with the new system. Results show that detection of NO2 at typical urban atmospheric levels has been achieved using an inexpensive field based fibre-optic spectrometer and a readily available, easy to align, light source. In addition the new system can be used to get a semi-quantitative estimation of the nitrogen dioxide concentration within errors of 20%. While keeping the typical benefits of open-path techniques, the new system has important advantages over them such as cost, simplicity and portability.     

Synthesis and in vitro antimicrobial and antifungal properties of some novel 1,3,4-thiadiazole and s-triazolo[3,4-b][1,3,4]thiadiazole derivatives

A novel series of 2-arylthiocarbamoylhydrazino-5-phenyl-1,3,4-thiadiazoles III-VII was synthesized and cyclodesulfurized into the corresponding 3-arylamino-6-phenyl-s-triazolo[3,4-b][1,3,4]thiadiazoles VIII-XII with DCCD. Some of the products were found to be only moderately active against Staphylococcus aureus and Candida albicans.