Microwave Irradiation and Glutamic Acid-Assisted Phytotreatment of Tannery and Surgical Industrial Wastewater by Sorghum

We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the impact of foliar-applied GA on Sorghum under wastewater conditions. Plants were treated with or without microwave irradiation (30 s, 2.45 GHz), GA (5 and 10 mM), and wastewater (0, 25, 50, and 100). Growth and photosynthetic pigments were significantly decreased in plants only treated with various concentrations of WW. GA significantly improved the plant growth characteristics both in MR-treated and -untreated plants compared with respective controls. HMs stress increased electrolyte leakage (EL), hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) content; however, the GA chelation significantly improved the antioxidant enzymes activities such as ascorbate oxidase (APX), superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) both in MR-treated and -untreated plants under WW stress compared with respective controls. The results suggested that the MR-treated plants accumulate higher levels of HMs under GA addition in comparison to the WW-only-treated and MR-untreated plants. The maximum increase in Cd accumulation was observed in the range of 14–629% in the roots, 15–2964% in the stems, and 26–4020% in the leaves; the accumulation of Cu was 18–2757% in the roots, 15–4506% in the stems, and 23–4605% in the leaves; and the accumulation of Pb was 13–4122% in the roots, 21–3588% in the stems, and 21–4990% in the leaves under 10 mM GA and MR-treated plants. These findings confirmed that MR-treated sorghum plants had a higher capacity for HMs uptake under GA and could be used as a potential candidate for wastewater treatment.     

Pharmacological Properties of 4′, 5, 7-Trihydroxyflavone (Apigenin) and Its Impact on Cell Signaling Pathways

Plant bioactive compounds, particularly apigenin, have therapeutic potential and functional activities that aid in the prevention of infectious diseases in many mammalian bodies and promote tumor growth inhibition. Apigenin is a flavonoid with low toxicities and numerous bioactive properties due to which it has been considered as a traditional medicine for decades. Apigenin shows synergistic effects in combined treatment with sorafenib in the HepG2 human cell line (HCC) in less time and statistically reduces the viability of tumor cells, migration, gene expression and apoptosis. The combination of anti-cancerous drugs with apigenin has shown health promoting potential against various cancers. It can prevent cell mobility, maintain the cell cycle and stimulate the immune system. Apigenin also suppresses mTOR activity and raises the UVB-induced phagocytosis and reduces the cancerous cell proliferation and growth. It also has a high safety threshold, and active (anti-cancer) doses can be gained by consuming a vegetable and apigenin rich diet. Apigenin also boosted autophagosome formation, decreased cell proliferation and activated autophagy by preventing the activity of the PI3K pathway, specifically in HepG2 cells. This paper provides an updated overview of apigenin’s beneficial anti-inflammatory, antibacterial, antiviral, and anticancer effects, making it a step in the right direction for therapeutics. This study also critically analyzed the effect of apigenin on cancer cell signaling pathways including the PI3K/AKT/MTOR, JAK/STAT, NF-κB and ERK/MAPK pathways.     

An enhanced performance of hybrid supercapacitor based on polyaniline-manganese phosphate binary composite

Journal of Solid State Electrochemistry - Manganese phosphate (Mn3(PO4)2) particles decorated polyaniline (PANI) have been proposed as a promising electrode material for supercapacitors. Mn3(PO4)2...     

Studies on interactions of excited cadmium and mercury atoms with secondary and tertiary alkyl- and silylamines in gas phase

The Cd(³P₁)- and Hg(³P₁)-photosensitized emissions of some secondary and tertiary alkyl- and silylamines have been investigated under conditions of steady illumination at 493 and 298 K, respectively. The emission bands were observed at around 440 nm in the cadmium-photosensitized reactions of these amines. In contrast, no appreciable emission bands were observed in the mercury-photosensitized reactions of these amines. However, upon addition of tert-butyl alcohol to the amine-mercury system, an emission band evolved at around 350 nm in the mercury-photosensitization. The peak-wavelengths for secondary and tertiary alkyl- and silylamines are slightly shorter than the values predicted from the correlations between the peak wavelength and the first ionization energy obtained in the cadmium- and mercury-photosensitized luminescence of ammonia and primary amines. The quenching efficiencies of the cadmium and mercury resonance lines by secondary alkyl- and silylamines are higher than those by tertiary alkyl- and silylamines. These observations suggest that the steric hindrance by the alkyl and silyl groups to the approach of the nitrogen atom in the amines to excited cadmium and mercury atoms seems to be an important factor for the stabilization of the exciplexes and the quenching of the resonance lines. The behavior of silylamines is similar to that of alkylamines in cadmium- and mercury-photosensitized reactions.     

Possible Evidence of Amide Bond Formation Between Sinapinic Acid and Lysine-Containing Bacterial Proteins by Matrix-Assisted Laser Desorption/Ionization (MALDI) at 355?nm

We previously reported the apparent formation of matrix adducts of 3,5-dimethoxy-4-hydroxy-cinnamic acid (sinapinic acid or SA) via covalent attachment to disulfide bond-containing proteins (HdeA, Hde, and YbgS) from bacterial cell lysates ionized by matrix-assisted laser desorption/ionization (MALDI) time-of-flight-time-of-flight tandem mass spectrometry (TOF-TOF-MS/MS) and post-source decay (PSD). We also reported the absence of adduct formation when using ??-cyano-4-hydroxycinnamic acid (CHCA) matrix. Further mass spectrometric analysis of disulfide-intact and disulfide-reduced over-expressed HdeA and HdeB proteins from lysates of gene-inserted E. coli plasmids suggests covalent attachment of SA occurs not at cysteine residues but at lysine residues. In this revised hypothesis, the attachment of SA is preceded by formation of a solid phase ammonium carboxylate salt between SA and accessible lysine residues of the protein during sample preparation under acidic conditions. Laser irradiation at 355?nm of the dried sample spot results in equilibrium retrogradation followed by nucleophilic attack by the amine group of lysine at the carbonyl group of SA and subsequent amide bond formation and loss of water. The absence of CHCA adducts suggests that the electron-withdrawing effect of the ??-cyano group of this matrix may inhibit salt formation and/or amide bond formation. This revised hypothesis is supported by dissociative loss of SA (?224?Da) and the amide-bound SA (?206?Da) from SA-adducted HdeA and HdeB ions by MS/MS (PSD). It is proposed that cleavage of the amide-bound SA from the lysine side-chain occurs via rearrangement involving a pentacyclic transition state followed by hydrogen abstraction/migration and loss of 3-(4-hydroxy-3,5-dimethoxyphenyl)prop-2-ynal (?206?Da).     

Current perspectives on quinazolines with potent biological activities: A review

Quinazoline is a heterocyclic compound having biological activities. It is aromatic in nature having bicyclic structure containing benzene ring and pyrimidine ring. Quinazoline and its derivatives are found to have wide range of biological activities that is anticancer, analgesic, antimicrobial, antihypertensive, anticonvulsant, antimalarial, antitumor, and anti-tubercular activities. The purpose of this review is to highlight the recent researches made by researchers on various biological activities of quinazoline derivatives on different targets.     

Broadband gain-clamped linear quantum dash optical amplifiers

The linear optical gain of gain-clamped quantum dash semiconductor optical amplifiers (GCSOAs) has been investigated using the rate equation model. The gain spectrum of GCSOA for different wavelength detuning and different doping has been studied. Our analysis shows that the linear gain can be increased as the laser wavelength is detuned to high wavelength where the peak of the optical gain, which is found at wavelengths below the ground state wavelength, is shifted to lower wavelength as the laser wavelength is increased. We find that doping the dashes by either N-type or P-type enhances the linear optical gain and shifts the gain peak to lower wavelength. Moreover, we found that GCSOA with lightly N-type doping demonstrates large separation between the laser and the amplifier wavelength. Also we find that small inhomogeneous line broadening enhances the linear gain peak, shifts the gain peak to wavelength lower than the GS wavelength and widens the gain spectrum.     

Compressive advection and multi‐component methods for interface‐capturing

This paper develops methods for interface‐capturing in multiphase flows. The main novelties of these methods are as follows: (a) multi‐component modelling that embeds interface structures into the continuity equation; (b) a new family of triangle/tetrahedron finite elements, in particular, the P₁DG‐P₂(linear discontinuous between elements velocity and quadratic continuous pressure); (c) an interface‐capturing scheme based on compressive control volume advection methods and high‐order finite element interpolation methods; (d) a time stepping method that allows use of relatively large time step sizes; and (e) application of anisotropic mesh adaptivity to focus the numerical resolution around the interfaces and other areas of important dynamics. This modelling approach is applied to a series of pure advection problems with interfaces as well as to the simulation of the standard computational fluid dynamics benchmark test cases of a collapsing water column under gravitational forces (in two and three dimensions) and sloshing water in a tank. Two more test cases are undertaken in order to demonstrate the many‐material and compressibility modelling capabilities of the approach. Numerical simulations are performed on coarse unstructured meshes to demonstrate the potential of the methods described here to capture complex dynamics in multiphase flows. Copyright © 2015 John Wiley & Sons, Ltd.