Enantioselective synthesis of chiral sulfones by ir-catalyzed asymmetric hydrogenation: a facile approach to the preparation of chiral allylic and homoallylic compounds

A highly efficient and enantioselective Ir-catalyzed hydrogenation of unsaturated sulfones was developed. Chiral cyclic and acyclic sulfones were produced in excellent enantioselectivities (up to 98% ee). Coupled with the Ramberg-B?cklund rearrangement, this reaction offers a novel route to chiral allylic and homoallylic compounds in excellent enantioselectivities (up to 97% ee) and high yields (up to 94%).     

Ultrafast terahertz photoconductivity of bulk heterojunction materials reveals high carrier mobility up to nanosecond time scale

The few-picosecond (ps) decay of terahertz (THz) photoconductivity typically observed for conjugated polymer:fullerene blends (at excitation fluencies ~10(15) photons/cm(2) per pulse) is shown to be a result of charge pair annihilation for two polymer:PCBM blends. At a factor of 100 lower excitation density, the THz decay is in the hundreds of ps time scale, implying that very high carrier mobility (~0.1 cm(2) V(-1) s(-1)) prevails for long time after charge formation, of importance for free charge formation in organic solar cells.     

B-norsteroids from Hymenoscyphus pseudoalbidus

Two viridin-related B-norsteroids, B-norviridiol lactone (1) and B-norviridin enol (2), both possessing distinct unprecedented carbon skeletons, were isolated from a liquid culture of the ash dieback-causing fungus Hymenoscyphus pseudoalbidus. Compound 2 was found to degrade to a third B-norsteroidal compound, 1β-hydroxy-2α-hydro-asterogynin A (3), which was later detected in the original culture. The proposed structure of 1 is, regarding connectivity, identical to the original erroneous structure for TAEMC161, which was later reassigned as viridiol. Compound 2 showed an unprecedented 1H-13C HMBC correlation through an intramolecular hydrogen bond. The five-membered B-ring of compounds 1-3 was proposed to be formed by a benzilic acid rearrangement. The known compound asterogynin A was found to be formed from 3 by a β-elimination of water. All compounds were characterized by NMR spectroscopy, LC-HRMS and polarimetry.     

An adiabatic capture theory and quasiclassical trajectory study of C + NO and O + CN on the 2A', 2A", and 4A" potential energy surfaces

The adiabatic capture centrifugal sudden approximation (ACCSA) has been applied to the C + NO and O + CN reactions, along with quasiclassical trajectory simulations. Existing global analytic fits to the potential energy surfaces of the CNO system in the (2)A', (2)A", and (4)A" electronic states have been used. Thermal rate constants for reaction in each of the electronic states have been calculated. In all cases a strong temperature dependence is evident in the calculated rate constants. The agreement between the calculated adiabatic capture and quasiclassical trajectory rate constants is excellent in some cases, but these rate constants differ considerably in other cases. This behavior is analyzed in terms of the anisotropy of the potential energy surfaces. On the basis of this analysis, we propose a new diagnostic for the reliability of ACCSA capture calculations.     

Bridging Ligand Length Controls AT Selectivity and Enantioselectivity of Binuclear Ruthenium Threading Intercalators

The slow dissociation of DNA threading intercalators makes them interesting as model compounds in the search for new DNA targeting drugs, as there appears to be a correlation between slow dissociation and biological activity. Thus, it would be of great value to understand the mechanisms controlling threading intercalation, and for this purpose we have investigated how the length of the bridging ligand of binuclear ruthenium threading intercalators affects their DNA binding properties. We have synthesised a new binuclear ruthenium threading intercalator with slower dissociation kinetics from ct‐DNA than has ever been observed for any ruthenium complex with any type of DNA, a property that we attribute to the increased distance between the ruthenium centres of the new complex. By comparison with previously studied ruthenium complexes, we further conclude that elongation of the bridging ligand reduces the sensitivity of the threading interaction to DNA flexibility, resulting in a decreased AT selectivity for the new complex. We also find that the length of the bridging ligand affects the enantioselectivity with increasing preference for the ΔΔ enantiomer as the bridging ligand becomes longer.     

Recoil spectrometry: Ion accelerator based elemental characterisation of surface layers

Recoil Spectrometry covers a group of techniques that are very similar to the well known Rutherford backscattering Spectrometry technique, but with the important difference that one measures the recoiling target atom rather than the projectile ion. This makes it possible to determine both the identity of the recoil and its depth of origin from its energy and velocity, using a suitable detector system. The incident ion is typically high-energy (30–100MeV)³⁵C1,⁸¹Br or¹²⁷I. Low concentrations of light elements such as C, O and N can be profiled in a heavy matrix such as Fe or GaAs. Here we present an overview of mass and energy dispersive recoil Spectrometry and illustrate its successful use in some typical applications.     

Determination of crude protein in animal feed, forage, grain, and oilseeds by using block digestion with a copper catalyst and steam distillation into boric acid: collaborative study

A collaborative study was conducted to evaluate the repeatability and reproducibility of an extension of AOAC Official Method 991.20, Nitrogen (Crude) in Milk, to animal feed, forage (plant tissue), grain, and oilseed materials. Test portions are digested in an aluminum block at 420 degrees C in sulfuric acid with potassium sulfate and a copper catalyst. Digests are cooled and diluted, and concentrated sodium hydroxide is added to neutralize the acid and make the digest basic; the liberated ammonia is distilled by using steam distillation. The liberated ammonia is trapped in a weak boric acid solution and titrated with a stronger standardized acid, hydrochloric acid; colorimetric endpoint detection is used. Fourteen blind samples were sent to 13 collaborators in the United States, Denmark, Sweden, Germany, and the United Kingdom. Recoveries of nitrogen from lysine, tryptophan, and acetanilide were 86.8, 98.8, and 100.1%, respectively. The within-laboratory relative standard deviation (RSDr, repeatability) ranged from 0.40 to 2.38% for crude protein. The among-laboratories (including within-) relative standard deviation (RSD(R), reproducibility) ranged from 0.44 to 2.38%. It is recommended that the method be adopted First Action by AOAC INTERNATIONAL. A lower concentration (1% H3BO3) of trapping solution was compared with the concentration specified in the original protocol (4% H3BO3) and was found comparable for use in an automatic titration system in which titration begins automatically as soon as distillation starts. The Study Directors recommend that 1% H3BO3 as an optional alternative to 4% boric acid trapping solution be allowed for automatic titrators that titrate throughout the distillation.     

Volume dependence of thermal conductivity and bulk modulus for poly(propylene glycol)

The thermal conductivity λ and heat capacity per unit volume of poly(propylene glycol) PPG (0.4 and 4.0 kg·mol⁻¹ in number-average molecular weight) have been measured in the temperature range 150–295 K at pressures up to 2 GPa using the transient hot-wire method. At 295 K and atmospheric pressure, λ = 0.147 W m⁻¹K⁻¹ for PPG (0.4 kg·mol⁻¹) and λ = 0.151 W m⁻¹K⁻¹ for PPG (4.0 kg·mol⁻¹). The temperature dependence of λ is less than 4 × 10⁻⁴ W m⁻¹K⁻² for both molecular weights. The bulk modulus has been measured in the temperature range 215–295 K up to 1.1 GPa. At atmospheric pressure, the room temperature bulk moduli are 1.97 GPa for PPG (0.4 kg·mol⁻¹) and 1.75 GPa for PPG (4.0 kg·mol⁻¹). These data were used to calculate the volume dependence of $ \lambda ,g\, = - \left( {\frac{{\partial \lambda /\lambda }}{{\partial V/V}}} \right)_T $. At room temperature and atmospheric pressure (liquid phase) we find g = 2.79 for PPG (0.4 kg·mol⁻¹) and g = 2.15 for PPG (4.0 kg·mol⁻¹). The volume dependence of g, (∂g/∂ log V)_T varies between −19 to −10 for both molecular weights. Under isochoric conditions, g is nearly independent of temperature. The difference in g between the glassy state and liquid phase is small and just outside the inaccuracy of g of about 8%. The theoretical model for λ by Horrocks and McLaughlin yields an overestimate of g by up to 120%. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 345–355, 1998     

Complete 1H and 13C NMR assignments of aurasperone A and fonsecinone A, two bis-naphthopyrones produced by Aspergillus aculeatus

Complete assignments of 1H and 13C NMR chemical shifts of the polyketides aurasperone A and fonsecinone A were made by means of nuclear Overhauser enhancement and heteronuclear NMR correlation experiments. These compounds were isolated for the first time from Aspergillus aculeatus, an endophytic fungus obtained from leaves of Melia azedarach(Meliaceae).     

The roles of template complexation and ligand binding conditions on recognition in bupivacaine molecularly imprinted polymers

A model for the molecular basis for ligand recognition in bupivacaine imprinted methacrylic acid-ethylene glycol dimethacrylate co-polymers has been developed based upon a series of (1)H-NMR studies in conjunction with HPLC and radioligand binding analyses. (1)H-NMR studies indicated that functional monomer-template complexes survive the polymerisation process, at least up until the stage of gelation. Polymers were synthesised and characterised by surface area analysis (BET), FT-IR and SEM. A combination of zonal and frontal chromatographic studies in aqueous and non-polar media indicate that selectivity arises from a combination of hydrophobic and electrostatic interactions. However, in the concentration regime employed for LC-based studies, ligand recognition in aqueous media was shown to be predominantly non-specific and hydrophobic in character. Radioligand binding studies, in lower ligand binding concentration regimes, permitted closer examination of the higher affinity binding sites. It was shown that the presence of a polar modifier in a non-polar solvent, or an organic modifier in water, produced enhanced selectivity. Variable temperature studies showed that the temperature of binding influences selectivity as well as the apparent number of sites available and that this effect is different in organic and aqueous environments. This indicates that the system studied is more complex in character than is generally appreciated. A comparison of the techniques employed here indicates that although chromatographic studies provide a valuable first-round screen for polymer-ligand selectivities, the level of detail obtainable using radioligand binding studies (lower concentrations and true equilibrium binding) makes them superior for detailed evaluations of molecularly imprinted polymers.