Aggregation of [Cu(II)4] building blocks into [Cu(II)8] clusters or a [Cu(II)4]infinity chain through subtle chemical control

Coordination complexes of the ligand H3L [1,3-bis(3-oxo-3-phenylpropionyl)-2-hydroxy-5-methylbenzene] with Cu(II) are reported. Clusters showing various nuclearities or modes of supramolecular organization have been prepared by slightly changing the reaction conditions and have been crystallographically characterized. The reaction of H3L with one equivalent of Cu(OAc)2 in DMF yields the dinuclear complex [Cu2(HL)2(dmf)2] (1). Reaction in MeOH of H3L with an increased amount of metal, in the form of Cu(NO3)2, and excess strong base (nBu4NOH) affords the cluster [Cu8(L)2(OMe)8(NO3)2] (2). Complex 2 is a dimer of two linear [Cu4] arrays bridged by methoxide ligands, where the polynucleating ligand is fully deprotonated. The [Cu4]2 clusters are linked to each other by NO3- bridges to form one-dimensional coordination polymers. The link between [Cu8] units and their relative spatial positioning can be modified by changing the anion of the Cu(II) salt, as demonstrated by the synthesis of the cluster polymers [Cu8(L)2(OMe)8Cl2] (3) and [Cu8(L)(OMe)7.86Br2.14] (4), where only NO3- has been replaced by Cl- or Br-, respectively. Similarly, when ClO4- is used, compound [Cu8(L)2(OMe)8(ClO4)2(MeOH)4] (5) can be isolated. It contains independent [Cu8] units. A slight change in the stoichiometry of the reaction leading to 2 affords the related complex catena-[Cu4(L)(OMe)3(NO3)2(H2O)0.36] (6). This polymer contains essentially the same [Cu4] moiety as 2, albeit organized in a completely different arrangement. Each [Cu4] unit in 6 is linked by OMe- ligands to two such equivalent groups to form an infinite chain. Magnetic susceptibility measurements reveal weak antiferromagnetic exchange between Cu(II) centers in 1 (J = -0.73 cm(-1)) and strong antiferromagnetic coupling within [Cu4] chains in 2, 5, and 6 (most negative J values of -113.8 and -177.3 cm(-1) for 2 and 6, respectively).     

Quantitation of protein binding to the capillary wall in acidic, isoelectric buffers and means for minimizing the phenomenon

Notwithstanding the use of acidic, amphoteric, isoelectric buffers with isoelectric points (pI) in the pH 2-3 range, adsorption of proteins to the naked silica wall can be non-negligible. Two such buffers have been tested: iminodiacetic acid (IDA; pI 2.23, apparent pH 3.2 in 7 M urea) and aspartic acid (pI 2.77, apparent pH 3.7 in 7 M urea). Three potential quenchers of such interactions have been tested: hydroxyethylcellulose (HEC; number average molecular mass, Mr 27,000), TEPA (tetraethylenepentamine) and a novel, quatemarized piperazine [N(methyl-N-omega-iodobutyl)-N'-methylpiperazine] (Q-Pip), either alone or in binary and ternary mixtures. Human alpha- and beta-globin chains have been used as test proteins in capillary electrophoresis separations. It has been found that mixtures of these compounds are the worst possible remedy. E.g., a ternary mixture comprising 0.5% HEC, 0.5 mM TEPA and 1 mM Q-Pip still leaves behind 4.5% adsorbed protein onto the silica surface in runs in IDA buffer and 7 M urea (pH 3.2). Conversely, 0.5 mM TEPA or 1 mM Q-Pip, when used alone, minimize adsorption down to only 1.8% and 0.5%, respectively. When the same globin chain separations are performed in Asp and 7 M urea (pH 3.7), the situation is much worse: 44% protein is adsorbed in a ternary mixture of 0.5% HEC, 1 mM Q-Pip and 0.5 mM TEPA. However, when used alone, 0.5 mM TEPA and 1 mM Q-Pip reduce globin adsorption to levels of 8% and 5%, respectively. TEPA and Q-Pip are found to be in all cases the best quenchers of protein interaction to naked fused-silica; in addition they exhibit the unique property of smoothing the base-line and giving reproducible runs. The best method for desorbing bound protein was found to be an electrophoretic step consisting in driving sodium dodecylsulphate micelles from the cathodic reservoir.     

An investigation into the use of the nuclear microprobe for examining distributions of boron isotopes

A technique has been developed to permit the distribution of boron isotopes in metal samples to be measured with the nuclear microprobe. Samples are irradiated with focussed beams of α-particles, and protons from the (α, p) reactions on both¹⁰B and¹¹B are counted. Particle spectroscopy enables contributions from the two isotopes to be determined separately from the same spectrum and distributions can be followed by varying the position of the ion beam on the sample surface.     

In Ssarch of new anti-bacterial target genes: a comparative/structural genomics approach

We outline a joint academic/industrial (CNRS/AVENTIS) functional genomics project aiming at the discovery of new anti-bacterial gene targets. Starting from all publicly available bacterial genomes, a subset of the most evolutionary conserved protein-coding genes has been identified. We retained genes with clear homolog in E. coli and at least one gram-positive bacterium among B.subtilis, M. tuberculosis, L. lactis or S. pyogenes. This subset was further reduced to genes encoding non-membrane proteins of unknown or hypothetical functions. The 221 E. coli Open Reading Frames (ORFs) identified through this comprehensive bioinformatic analysis are now submitted to a systematic 3-D structure determination protocol including cloning, protein expression and purification, crystallisation and X-ray diffraction. Our strategy was designed to focus on promising wide-spectrum targets as well as original biochemical pathways. Bioinformatics is used throughout all phases of project, including the initial large-scale comparative genomics analyses, the purification/expression and crystallisation stages for the detection of helpful sequence-specific features (e.g. cofactor binding motifs, non-structured N- or C- term extremities, etc ), and finally for the interpretation of the structures in conjunction with multiple sequence alignments for the identification of key residues, interaction areas on molecular surfaces, and overall function predictions.     

Structural, Infrared, and Magnetic Characterization of the Solid Solution Series Sr2−xPbx(VO)(VO4)2; Evidence of the Pb6sLone Pair Stereochemical Effect

The solid solution Sr_2−xPb_xV₃O₉, 0≤x≤2, was prepared by solid state reactions and characterized by X-ray diffraction, IR spectroscopy, and magnetic susceptibility measurements. Single crystals of the pure strontium phase and mixed Sr/Pb compounds were prepared by high temperature treatment of the respective powder compositions. Pb₂V₃O₉crystals could only be obtained by the electrochemical reduction of molten PbV₂O₆. These crystals were always twinned. The previously reported crystal structure of Sr₂V₃O₉was confirmed. It was refined toR=0.050,R_w=0.057, in space group C2/c,a=7.555(1) Å,b=16.275(2) Å,c=6.948(1) Å,β=119.78(1)°. The single crystal structural studies of the Sr_1.02Pb_0.98V₃O₉and Sr_0.67Pb_1.33V₃O₉members of the series show that the introduction of lead gives rise to a progressively complicated splitting of Sr²⁺/Pb²⁺and the tetrahedral vanadium ion crystallographic sites. As a consequence the vanadium framework distorts and beyond the Sr_0.5Pb_1.5V₃O₉composition the crystal symmetry becomes triclinic. This distortion is ascribed to the stereochemical effect of the 6s²lone pair of Pb²⁺. The crystallographic parameters of Pb₂V₃O₉area=7.598(1) Å,b=16.393(3) Å,c=6.972(2) Å,α=91.38(1)°,β=119.35(1)°,γ=90.47(1)°. Pb₂V₃O₉exhibits a more complex IR spectrum than the monoclinic phases. Despite the similarity between the triclinic and monoclinic phases the magnetic susceptibilities indicate differences in the coupling between V⁴⁺ions at low temperatures.     

Model complexes for metallated polythiophenes: gold(I) and palladium(II) complexes of bis(diphenylphosphino)oligothiophenes

The preparations of two new phosphinothiophene ligands, 3,3'-bis(diphenylphosphino)-2,2'-bithiophene (dppbt; 1) and 3,3' "-dihexyl-3',3' '-bis(diphenylphosphino)-2,5':2',2' ':5' ',2' "-quaterthiophene (hdppqt; 2) are reported. Oxidation of 1 gives 3,3'-bis(diphenylphosphine oxide)-2,2'-bithiophene (3), and the crystal structure of this compound was determined. Pd(II) and Au(I) complexes of these ligands have been synthesized and characterized. Crystal structures of [(dppbt)PdCl(2)] (1-Pd), [(hdppqt)PdCl(2)] (2-Pd), [(dppbt)(AuCl)(2)] (1-Au), and [(hdppqt)(AuCl)(2)] (2-Au) were obtained. [(dppbt)(AuCl)(2)] crystallized in two solid-state forms; crystals grown from CH(2)Cl(2)/Et(2)O show a gold-gold interaction of 3.3221(4) A, but from CH(2)Cl(2)/toluene, the molecule crystallizes as a toluene adduct (1-Au-tol) and does not show any gold-gold interaction. All the complexes were characterized via UV-vis spectroscopy and cyclic voltammetry, and the effect of the metal on the energy of the pi-pi transition and oxidation potential was determined. These data are correlated to the interannular torsion angles in the oligothienyl groups from the crystal structure studies.     

FTIR spectroscopy study of CO adsorption on Pt-Na-mordenite

Different carbonyls are formed after CO adsorption at ambient temperature on a Pt-Na-mordenite (Pt-Na-MOR) sample. Pt(3+)(CO)(2) dicarbonyls (nu(s) at 2205 cm(-1) and nu(as) at 2167 cm(-1)) are decomposed without formation of monocarbonyls. The respective mixed-ligand species, Pt(3+)((12)CO)((13)CO), formed after (12)CO-(13)CO coadsorption, display bands at 2192 and 2131 cm(-1), in excellent agreement with the theoretically calculated values. Pt(2+)-CO species absorb at 2145 cm(-1) and are not able to accept a second CO molecule. Pt(+)-CO carbonyls are characterized by a band at 2111 cm(-1). Under CO equilibrium pressure, these species are converted into dicarbonyls (nu(s) at 2135 cm(-1) and nu(as) at 2101 cm(-1)). The respective mixed-ligand species, Pt(+)((12)CO)((13)CO), manifest bands at 2123 and 2069 cm(-1), in good agreement again with the theory. Different carbonyls of metallic platinum are observed below 2100 cm(-)(1). In addition, weakly adsorbed CO was registered as Na(+)-CO complexes (2177 and 2165 cm(-1)) and Na(+)-OC-Na(+) species (2138 cm(-1)). It was found that during desorption of CO platinum was reduced, ultimately to metal. However, heating in a NO + O(2) mixture leads to reoxidation of the metal particles and restoration of the initial state of the sample.     

The crystal and molecular structure of tris[(triphenylstannyl)methyl]methane

The title compound, C₅₈H₅₂Sn₃, belongs to the triclinic space group P$\text{1}$, with a 10.165, b 13.365, c 18.670 Å, α 96.28, β 93.88, γ 103.15°, V = 2443.8 ų, f_w = 1105.1, Z = 2, D_calc 1.501 g cm^?3, m.p. 206.5–208°C, λ(Mo-K_$\text{α}$) 0.71069 Å. The structure was refined on 2684 nonzero reflections to an R factor of 0.044. The crystal contains molecules in which the (SnCH₂)₃CH core possesses an approximate C₃ symmetry. The three SnC(H₂) bonds are gauche to the C(4)-H bond. Repulsive interactions involving the bulky Ph₃Sn substituents lead to large SnC(H₂)C(H) angles (av. 117.3°), whereas the C(H₂)C(H)C(H₂) angles at the tertiary carbon average 111.3°. Little distortion of the Ph₃Sn groups themselves is present, since the PhSnPh angles (av. 109.8°) are almost equal to the C(H₂)SnPh angles (av. 109.9°). The molecule as a whole has no symmetry because the aromatic rings in the three Ph₃Sn groups have different orientations. The phenyl groups create a pocket in the middle of the molecule which encloses and shields the tertiary hydrogen atom. The resulting inaccessibility of this hydrogen accounts in part for the low reactivity of the title compound in redox reactions.     

Structural characterization of phosphatidylcholines by atmospheric pressure photoionization mass spectrometry

The potential of atmospheric pressure photoionization was investigated for the structural analysis of phosphatidylcholine lipids (PCs). [M+H]+ ions of high abundance were obtained, along with several fragment ions. Three of these dissociation products corresponded to quite unusual fragmentation pathways but allowed the determination of both the nature and the position on the glycerol backbone (sn-1 or sn-2) of the fatty acyl chains. The loss of a methyl group from the choline head was also observed. These results suggest a complex ionization mechanism in APPI. However, this method proved to be very powerful for the rapid structural analysis of PC species without using MS/MS experiments.