On the use of relative deceleration values for the determination of silicon by PIGE

By spiking the samples with a compound containing both a non-analyte and an analyte element, to which a relative deceleration property for 5 Me V protons has been ascribed, relative deceleration values for the samples could be obtained by measuring the prompt -yields induced in the non-analyte element. These values are used to correct for matrix effects in elemental analysis using PIGE techniques. In addition to this, the analytical results thus obtained can also be compared to those obtained by the simultaneous application of the analyte spiking technique to the collected yield data. These non-analyte spiking approaches were used to analyze silicon in polymer materials. These methods were tested by analyzing the two reference standards BCS 308 and Standard Chrome Ore XXXI. Li₂SiO₃, containing both the non-analyte as well as the analyte element, was selected as comparator and spike. Results obtained for the polymer samples were also compared to those obtained by PIXE.     

Fabrication of "hairy" colloidosomes with shells of polymeric microrods

Novel colloidosome microcapsules with aqueous gel cores and integral shells of rodlike polymeric particles have been prepared and characterized. The synthesis is based on templating water-in-oil emulsions stabilized by rodlike particles followed by gelling of the aqueous phase, dissolution of the oil phase in ethanol, and redispersion of the obtained colloidosome capsules in water. Such capsules may find applications as vehicles for delivery and controlled release of drugs, cosmetics, and food supplements.     

Conformational analysis of a stereochemically complete set of cis-enediol peptide analogues

A conformational analysis of a stereochemically complete set of peptide analogues based on a cis-enediol unit is presented. The cis-enediol unit, which can replace a two or a three amino acid segment of a peptide, contains two "side chains", four asymmetrical carbon atoms, and six free dihedral angles. To determine the accessible conformational space, the molecules are divided into three fragments, each containing two free dihedral angles. The energy surfaces are computed for all dihedral angle values, and the possible conformations of the cis-enediol unit analogues are built using all combinations of the surface minima. Such a "build-up" procedure, which is very fast, is able to reproduce 75% of the minima obtained from a full dihedral angle exploration of the conformational space. The cis-enediol unit minima are compared with the corresponding di- and tripeptide minima; all peptide minima can be closely matched by a cis-enediol unit minimum of low energy (less than 2.2 kcal/mol above the lowest energy conformer). However, there are low energy minima of the cis-enediol unit that have no corresponding minima in peptides. The results are shown to depend strongly on the chirality of the analogues. The ability of each of the stereoisomers to mimic natural peptides, evaluated by the present approach, is correlated with its experimental activity in a renin inhibition assay.     

Effect of Groundwater Composition on Arsenic Detection by Bacterial Biosensors

A luminescent bacterial biosensor was used to quantify bioavailable arsenic in artificial groundwater. Its light production above the background emission was proportional to the arsenite concentration in the toxicologically relevant range of 0 to 0.5 μM. Effects of the inorganic solutes phosphate, Fe(II) and silicate on the biosensor signal were studied. Phosphate at a concentration of 0.25 g L⁻¹ phosphate slightly stimulated the light emission, but much less than toxicologically relevant concentrations of the much stronger inducer arsenite. No effect of phosphate was oberved in the presence of arsenite. Freshly prepared sodium silicate solution at a concentration of 10 mg L⁻¹ Si reduced the arsenite-induced light production by roughly 37%, which can be explained by transient polymerization leading to sequestration of some arsenic. After three days of incubation, silicate did not have this effect anymore, probably because depolymerization occurred. In the presence of 0.4 mg L⁻¹ Fe(II), the arsenite-induced light emission was reduced by up to 90%, probably due to iron oxidation followed by arsenite adsorption on the less soluble Fe(III) possibly along with some oxidation to the stronger adsorbing As(V). Addition of 100 μM EDTA was capable of releasing all arsenic from the precipitate and to transform it into the biologically measurable, dissolved state. The biosensor also proved valuable for monitoring the effectiveness of an arsenic removal procedure based on water filtration through a mixture of sand and iron granules.     

Zinc(II) as a versatile template for the design of dipolar and octupolar NLO-phores

Thermally stable dipolar and octupolar (D2d, D3) NLO-phores are readily accessible by combining one, two, or three 4,4'-bis(dialkylaminostyryl)-[2,2']-bipyridyl ligands with zinc(II) salts. The off-resonant beta0 values point out the superiority of octupoles versus dipoles in terms of nonlinearity/transparency tradeoff. The octahedral tris(bipyridyl)zinc(II) complex exhibits a very large beta0 value (241 x 10-30 esu), which is the largest ever reported for octupolar molecules.     

Synthesis of modified Weinreb amides: N-tert-butoxy-N-methylamides as effective acylating agents

An efficient preparation of N-methyl-O-tert-butylhydroxylamine hydrochloride has been settled, which allowed the synthesis of modified Weinreb amides. Nucleophilic addition of organolithium and Grignard reagents on these N-tert-butoxy-N-methylamides afforded efficiently the corresponding ketones and reduction with DIBAL furnished the corresponding aldehydes in good yields up to 97%.     

Bestimmung von Metallspuren in Polymeren mit Hilfe der Atom-Absorptionsspektrophotometrie

Zusammenfassung Die Atom-Absorptionsspektrophotometrie erlaubt die schnelle und genaue Bestimmung von Metallen in Polymeren, und zwar sowohl im ppm- als auch im Prozentbereich. Bei löslichen Polymeren werden vorzugsweise 2%ige Lösungen untersucht. Polymere, die in keinem geeigneten Lösungsmittel löslich sind, werden mit H₂SO₄/H₂O₂ aufgeschlossen. für flüchtige Metallverbindungen wird eine Umfällmethode mit anschließender Anreicherung der Metallspuren beschrieben. Untersucht werden Polystyrol, Celluloseester, Polyacrylnitril, ABS-Polymere, Polycarbonat, Polyvinylchlorid und seine Copolymeren, Polyamid, Polyäther, Wolle und Baumwolle. Nachweisgrenzen und günstigste Konzentrationsbereiche für die Elemente Li, Na, K, Mg, Ca, B, Al, Si, Sn, Pb, Sb, Cu, Ag, Au, Zn, Cd, Hg, Ti, Fe und Ni werden angegeben.

---

Determination of trace metals in polymers by atomic absorption spectrophotometry

Atomic absorption spectrophotometry allows quick and exact determination of both ppm and percent quantities of metals in polymers. Preferably 2% solutions of soluble polymers are analyzed. Polymers insoluble in a suitable solvent are ashed in H₂SO₄/H₂O₂. For volatile metal compounds a double precipitating method followed by enrichment of trace metals is described. The following polymers are studied: polystyrene, cellulose esters, polyacrylonitrile, acrylonitrile-butadiene-styrene-terpolymers, polycarbonate, Polyvinylchloride and its copolymers, polyamide, polyether, wool, and cotton. Detection limits and most favourable concentration ranges are reported for the elements Li, Na, K, Mg, Ca, B, Al, Si, Sn, Pb, Sb, Cu, Ag, Au, Zn, Cd, Hg, Ti, Fe, and Ni.

---

---

Herrn Prof. Dr. K. Hansen zum 60. Geburtstag gewidmet.

---

An dieser Stelle sei Herrn Dr. A. Reichle, dem Leiter des Wissenschaftlichen Laboratoriums der Farbenfabriken Bayer AG, Werk Dormagen, für seine Unterstützung gedankt.Den Herren K. Schumann und W. Kremer danke ich für ihre sorgfältige experimentelle Mitarbeit.     

Binding and condensation of plasmid DNA onto functionalized carbon nanotubes: toward the construction of nanotube-based gene delivery vectors

Carbon nanotubes (CNTs) constitute a class of nanomaterials that possess characteristics suitable for a variety of possible applications. Their compatibility with aqueous environments has been made possible by the chemical functionalization of their surface, allowing for exploration of their interactions with biological components including mammalian cells. Functionalized CNTs (f-CNTs) are being intensively explored in advanced biotechnological applications ranging from molecular biosensors to cellular growth substrates. We have been exploring the potential of f-CNTs as delivery vehicles of biologically active molecules in view of possible biomedical applications, including vaccination and gene delivery. Recently we reported the capability of ammonium-functionalized single-walled CNTs to penetrate human and murine cells and facilitate the delivery of plasmid DNA leading to expression of marker genes. To optimize f-CNTs as gene delivery vehicles, it is essential to characterize their interactions with DNA. In the present report, we study the interactions of three types of f-CNTs, ammonium-functionalized single-walled and multiwalled carbon nanotubes (SWNT-NH3+; MWNT-NH3+), and lysine-functionalized single-walled carbon nanotubes (SWNT-Lys-NH3+), with plasmid DNA. Nanotube-DNA complexes were analyzed by scanning electron microscopy, surface plasmon resonance, PicoGreen dye exclusion, and agarose gel shift assay. The results indicate that all three types of cationic carbon nanotubes are able to condense DNA to varying degrees, indicating that both nanotube surface area and charge density are critical parameters that determine the interaction and electrostatic complex formation between f-CNTs with DNA. All three different f-CNT types in this study exhibited upregulation of marker gene expression over naked DNA using a mammalian (human) cell line. Differences in the levels of gene expression were correlated with the structural and biophysical data obtained for the f-CNT:DNA complexes to suggest that large surface area leading to very efficient DNA condensation is not necessary for effective gene transfer. However, it will require further investigation to determine whether the degree of binding and tight association between DNA and nanotubes is a desirable trait to increase gene expression efficiency in vitro or in vivo. This study constitutes the first thorough investigation into the physicochemical interactions between cationic functionalized carbon nanotubes and DNA toward construction of carbon nanotube-based gene transfer vector systems.     

In Ssarch of new anti-bacterial target genes: a comparative/structural genomics approach

We outline a joint academic/industrial (CNRS/AVENTIS) functional genomics project aiming at the discovery of new anti-bacterial gene targets. Starting from all publicly available bacterial genomes, a subset of the most evolutionary conserved protein-coding genes has been identified. We retained genes with clear homolog in E. coli and at least one gram-positive bacterium among B.subtilis, M. tuberculosis, L. lactis or S. pyogenes. This subset was further reduced to genes encoding non-membrane proteins of unknown or hypothetical functions. The 221 E. coli Open Reading Frames (ORFs) identified through this comprehensive bioinformatic analysis are now submitted to a systematic 3-D structure determination protocol including cloning, protein expression and purification, crystallisation and X-ray diffraction. Our strategy was designed to focus on promising wide-spectrum targets as well as original biochemical pathways. Bioinformatics is used throughout all phases of project, including the initial large-scale comparative genomics analyses, the purification/expression and crystallisation stages for the detection of helpful sequence-specific features (e.g. cofactor binding motifs, non-structured N- or C- term extremities, etc ), and finally for the interpretation of the structures in conjunction with multiple sequence alignments for the identification of key residues, interaction areas on molecular surfaces, and overall function predictions.     

Structural, Infrared, and Magnetic Characterization of the Solid Solution Series Sr2−xPbx(VO)(VO4)2; Evidence of the Pb6sLone Pair Stereochemical Effect

The solid solution Sr_2−xPb_xV₃O₉, 0≤x≤2, was prepared by solid state reactions and characterized by X-ray diffraction, IR spectroscopy, and magnetic susceptibility measurements. Single crystals of the pure strontium phase and mixed Sr/Pb compounds were prepared by high temperature treatment of the respective powder compositions. Pb₂V₃O₉crystals could only be obtained by the electrochemical reduction of molten PbV₂O₆. These crystals were always twinned. The previously reported crystal structure of Sr₂V₃O₉was confirmed. It was refined toR=0.050,R_w=0.057, in space group C2/c,a=7.555(1) Å,b=16.275(2) Å,c=6.948(1) Å,β=119.78(1)°. The single crystal structural studies of the Sr_1.02Pb_0.98V₃O₉and Sr_0.67Pb_1.33V₃O₉members of the series show that the introduction of lead gives rise to a progressively complicated splitting of Sr²⁺/Pb²⁺and the tetrahedral vanadium ion crystallographic sites. As a consequence the vanadium framework distorts and beyond the Sr_0.5Pb_1.5V₃O₉composition the crystal symmetry becomes triclinic. This distortion is ascribed to the stereochemical effect of the 6s²lone pair of Pb²⁺. The crystallographic parameters of Pb₂V₃O₉area=7.598(1) Å,b=16.393(3) Å,c=6.972(2) Å,α=91.38(1)°,β=119.35(1)°,γ=90.47(1)°. Pb₂V₃O₉exhibits a more complex IR spectrum than the monoclinic phases. Despite the similarity between the triclinic and monoclinic phases the magnetic susceptibilities indicate differences in the coupling between V⁴⁺ions at low temperatures.