Properties of nanometric and micrometric multilayered films made of three conducting polymers

The electrochemical, electrical and morphological properties of multilayered films formed by alternated layers of poly(3,4-ethylenedioxythiophene), polypyrrole, and poly[N-(2-cyanoethyl)pyrrole], which were prepared by electrochemical layer-by-layer deposition, have been investigated and compared with those of multilayered films formed by two conducting polymers. Results indicate that the electrochemical behavior of the films formed by three conducting polymers depends on the micrometric or nanometric thickness of the layers. Thus, the electroactivity increases until the thickness of these films reaches a threshold value (∼2 μm), while the electrostability of the films is very remarkable when their thickness is close to ∼4 μm or higher. On the other hand, comparison between multilayered systems made of two and three conducting polymers indicates that the third component introduces heterogeneity in the interfaces between consecutive layers, reducing the ability to store charge. Among the latter, multilayered films formed by poly(3,4-ethylenedioxythiophene) and polypyrrole have been found to be particularly electroactive and electrostable. The surface morphology and topography of the layers have been used to rationalize the electrochemical properties of the different materials.     

Interfacial properties of emulsions stabilized with surfactant and nonsurfactant coated boehmite nanoparticles

The properties of emulsions stabilized with surface-modified boehmite particles of 26 and 8 nm in diameter have been investigated. The surface-modified particles were prepared by mixing aqueous dispersions of cationic boehmite particles with aqueous solutions of the surfactant p-dodecylbenzenesulfonic acid (DBSA) or the nonsurfactant p-toluenesulfonic acid (TSA). For the 26 nm particles, interfacial tension measurements indicate that p-dodecylbenzenesulfonic acid partitions between the particle surface and the oil-water interface, while p-toluenesulfonic acid remains on the particle surface. The partitioning of p-dodecylbenzenesulfonic acid supports the formation of emulsions, although in the absence of the particles the same surfactant concentration is not sufficient for emulsion stabilization. Due to the fast exchange kinetics, p-dodecylbenzenesulfonic acid is gradually replaced by particles. At equilibrium, the interfacial tension in the presence of the surface-modified particles is between the values for the pure particles and the pure surfactant solutions. However, the interfacial tension is independent of the surfactant concentration used in the preparation of the particles. Reducing the particle size to 8 nm leads to increased emulsion stability, and thus, the minimum particle concentration required to prepare stable emulsions was reduced to 0.1 g/L. However, above approximately 3.5 mmol/L of the sulfonic acids, the small particles dissolve slowly, and the emulsion stability is lost. This mechanism can be used to trigger the collapse of the emulsions.     

Chromatographic peak deconvolution of constitutional isomers by multiple-reaction-monitoring mass spectrometry

Highly efficient and sophisticated separation techniques are available to analyze complex compound mixtures with superior sensitivities and selectivities often enhanced by a 2nd dimension, e.g. a separation technique or spectroscopic and spectrometric techniques. For enantioselective separations numerous chiral stationary phases (CSPs) exist to cover a broad range of chiral compounds. Despite these advances enantioselective separations can become very challenging for mixtures of stereolabile constitutional isomers, because the on-column interconversion can lead to completely overlapping peak profiles. Typically, multidimensional separation techniques, e.g. multidimensional GC (MDGC), using an achiral 1st separation dimension and transferring selected analytes to a chiral 2nd separation are the method of choice to approach such problems. However, this procedure is very time consuming and only predefined sections of peaks can be transferred by column switching to the second dimension. Here we demonstrate for stereolabile 1,2-dialkylated diaziridines a technique to experimentally deconvolute overlapping gas chromatographic elution profiles of constitutional isomers based on multiple-reaction-monitoring MS (MRM-MS). The here presented technique takes advantage of different fragmentation probabilities and pathways to isolate the elution profile of configurational isomers.     

Screening of degradation products,impurities and precursors of chemical warfare agents in water and wet or dry organic liquid samples by in-sorbent tube silylation followed by thermal desorption–gas chromatography–mass spectrometry

A standard method used by inspection teams of the Organisation for the Prohibition of Chemical Weapons (OPCW) for preparation of aqueous samples requires several extraction and derivatization steps. This results in tedious and time consuming on-site analysis. A simple thermal desorption–gas chromatography–mass spectrometry (TD–GC–MS) method was developed to analyse for a broad range of degradation products, impurities and precursors of chemical warfare agents (CWA) in water solutions and wet or dry organic liquid samples. The method is fast, sensitive, requires only microliter volumes of sample and enables the simultaneous determination of a wide range of compounds with widely differing polarity, volatility and reactivity. The applicability of the method was demonstrated by successful analysis of five OPCW Official Proficiency Test samples.     

Thermal evolution of ceramic powders surrounding the YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7–x</Subscript> composition

Organometallic-derived ceramic compositions surrounding YBa₂Cu₃O_7–x (123) were evaluated via DTA-TG runs and dilatometric densification. The compositions were either Y, Ba or Cu deficient respect to 123. For the Yttrium deficient compact the presence of liquids containing 0–1.3 mole %YO_1.5—capable of dissolving the 123 grains—can promote a rapid sintering behavior. For Copper deficient compact the main densification/contraction mechanisms were delayed till 985 °C. For both Barium and Copper deficient compacts a strong exudation of liquids was detected at 990 °C and 1020 °C, respectively.     

Narrow-linewidth chirped frequency comb from a frequency-shifted feedback Ti:sapphire laser seeded by a phase-modulated single-frequency fiber laser

Frequency-shifted feedback (FSF) lasers have emerged as powerful tools for precision distance metrology. At the output of a Michelson interferometer, the detected rf spectra of the FSF laser light contain a length-dependent heterodyne beat signal whose linewidth ultimately limits the achievable accuracy of length measurements. Here, we demonstrate a narrow-linewidth chirped frequency comb from an FSF Ti:sapphire ring laser seeded by a phase-modulated, ultra-low-phase-noise, single-frequency fiber laser. We experimentally investigate the influence of the seed laser linewidth on the resulting width and shape of the length-dependent rf beat signal. An ultranarrow heterodyne beat linewidth of <20 Hz is observed.     

Controlled coupling of NV defect centers to plasmonic and photonic nanostructures

Nitrogen-vacancy (NV) defect centers in diamond have recently emerged as promising candidates for a number of applications in the fields of quantum optics and quantum information, such as single photon generation and spin qubit operations. The performance of these defect centers can strongly be enhanced through coupling to plasmonic and photonic nanostructures, such as metal particles and optical microcavities. Here, we demonstrate the controlled assembly of such hybrid structures via manipulation with scanning near-field probes. In particular, we investigate the plasmonic enhancement of the single photon emission through coupling to gold nanospheres as well as the coupling of diamond nanocrystals to the optical modes of microsphere resonators and photonic crystal cavities. These systems represent prototypes of fundamental nanophotonic/plasmonic elements and provide control on the generation and coherent transfer of photons on the level of a single quantum emitter.     

Studies on the metabolism of mitragynine,the main alkaloid of the herbal drug Kratom,in rat and human urine using liquid chromatography‐linear ion trap mass spectrometry

Mitragynine (MG) is an indole alkaloid of the Thai medicinal plant Mitragyna speciosa (Kratom in Thai) and reported to have opioid agonistic properties. Because of its stimulant and euphoric effects, Kratom is used as a herbal drug of abuse. The aim of the presented study is to identify the phase I and II metabolites of MG in rat and human urine after solid‐phase extraction (SPE) using liquid chromatography‐linear ion trap mass spectrometry providing detailed structure information in the MSⁿ mode particularly with high resolution. The seven identified phase I metabolites indicated that MG was metabolized by hydrolysis of the methylester in position 16, O‐demethylation of the 9‐methoxy group and of the 17‐methoxy group, followed, via the intermediate aldehydes, by oxidation to carboxylic acids or reduction to alcohols and combinations of some steps. In rats, four metabolites were additionally conjugated to glucuronides and one to sulfate, but in humans, three metabolites to glucuronides and three to sulfates. Copyright © 2009 John Wiley & Sons, Ltd.     

Photopolymerized silver-containing conducting polymer films. Part II. Physico-chemical characterization and mechanism of photopolymerization process

Physico-chemical and mechanical characterizations of nanophase silver-containing polypyrrole films prepared using a new photopolymerization process were performed. In general, the recorded physical, chemical, and mechanical data characteristic of these films was similar to corresponding literature data obtained from electropolymerized or chemically polymerized polypyrrole. However, photopolymerized polypyrrole films possessed an unusually high anion-to-monomer ratio of 0.8:1. Also, the photopolymerized material contained silver nanoparticles, having diameters of 2 μm or less, uniformally distributed throughout the polymer matrix. While the photopolymerization mechanism is complex, it is suggested that a pyrrole–silver cation complex is most likely the key component involved in the photopolymerization initiation step. Paper submitted for inclusion in the special issue of the Journal of Solid State Electrochemistry honoring the 85th birthday of Professor John O’M. Bockris.