Investigation of the formation of CuInS2 nanoparticles by the oleylamine route: comparison of microwave-assisted and conventional syntheses

The formation of copper indium disulfide nanoparticles via the oleylamine route using copper iodide, indium chloride, and elemental sulfur has been investigated by applying conventional thermal heating as well as microwave irradiation. Oleylamine thereby acts as a capping ligand as well as a solvent. In an initial set of experiments, the onset of the reaction was determined to be around 115 °C by an in situ X-ray study using Synchrotron radiation. Using comparatively low synthesis temperatures of 120 °C, it is already possible to obtain nanoparticles of 2-4 nm with both heating methods but with irregular shape and size distribution. By applying higher temperatures of 220 °C, more crystalline and larger nanoparticles were obtained with slight differences in crystallite size and size distribution depending on the synthesis route. The size of the nanoparticles is in the range of 3-10 nm depending on the heating time. Using microwave irradiation, it is possible to obtain nanoparticles in only 90 s of total synthesis time. Control experiments to probe a nonthermal microwave effect were carried out ensuring an identical experimental setup, including the heating profile, the stirring rate, and the volume and concentration of the solutions. These experiments clearly demonstrate that for the preparation of CuInS(2) nanoparticles described herein no differences between conventional and microwave heating could be observed when performed at the same temperature. The nanoparticles obtained by microwave and thermal methods have the same crystal phase, primary crystallite size, shape, and size distribution. In addition, they show no significant differences concerning their optical properties.     

X‐ray Magnetic Circular Dichroism Spectroscopy Applied to Nitrogenase and Related Models: Experimental Evidence for a Spin‐Coupled Molybdenum(III) Center

Nitrogenase enzymes catalyze the reduction of atmospheric dinitrogen to ammonia utilizing a Mo‐7Fe‐9S‐C active site, the so‐called FeMoco cluster. FeMoco and an analogous small‐molecule (Et₄N)[(Tp)MoFe₃S₄Cl₃] cubane have both been proposed to contain unusual spin‐coupled Mo^III sites with an S(Mo)=1/2 non‐Hund configuration at the Mo atom. Herein, we present Fe and Mo L₃‐edge X‐ray magnetic circular dichroism (XMCD) spectroscopy of the (Et₄N)[(Tp)MoFe₃S₄Cl₃] cubane and Fe L_2,3‐edge XMCD spectroscopy of the MoFe protein (containing both FeMoco and the 8Fe‐7S P‐cluster active sites). As the P‐clusters of MoFe protein have an S=0 total spin, these are effectively XMCD‐silent at low temperature and high magnetic field, allowing for FeMoco to be selectively probed by Fe L_2,3‐edge XMCD within the intact MoFe protein. Further, Mo L₃‐edge XMCD spectroscopy of the cubane model has provided experimental support for a local S(Mo)=1/2 configuration, demonstrating the power and selectivity of XMCD.     

Photopolymerized silver-containing conducting polymer films. Part II. Physico-chemical characterization and mechanism of photopolymerization process

Physico-chemical and mechanical characterizations of nanophase silver-containing polypyrrole films prepared using a new photopolymerization process were performed. In general, the recorded physical, chemical, and mechanical data characteristic of these films was similar to corresponding literature data obtained from electropolymerized or chemically polymerized polypyrrole. However, photopolymerized polypyrrole films possessed an unusually high anion-to-monomer ratio of 0.8:1. Also, the photopolymerized material contained silver nanoparticles, having diameters of 2 μm or less, uniformally distributed throughout the polymer matrix. While the photopolymerization mechanism is complex, it is suggested that a pyrrole–silver cation complex is most likely the key component involved in the photopolymerization initiation step. Paper submitted for inclusion in the special issue of the Journal of Solid State Electrochemistry honoring the 85th birthday of Professor John O’M. Bockris.     

Large scale biomimetic membrane arrays

To establish planar biomimetic membranes across large scale partition aperture arrays, we created a disposable single-use horizontal chamber design that supports combined optical–electrical measurements. Functional lipid bilayers could easily and efficiently be established across CO₂ laser micro-structured 8?×?8 aperture partition arrays with average aperture diameters of 301?±?5 μm. We addressed the electro-physical properties of the lipid bilayers established across the micro-structured scaffold arrays by controllable reconstitution of biotechnological and physiological relevant membrane peptides and proteins. Next, we tested the scalability of the biomimetic membrane design by establishing lipid bilayers in rectangular 24?×?24 and hexagonal 24?×?27 aperture arrays, respectively. The results presented show that the design is suitable for further developments of sensitive biosensor assays, and furthermore demonstrate that the design can conveniently be scaled up to support planar lipid bilayers in large square-centimeter partition arrays.

Methyl 4‐O‐β‐d‐galactopyranosyl α‐d‐mannopyranoside methanol 0.375‐solvate

Methyl β‐d ‐galactopyranosyl‐(1→4)‐α‐d ‐mannopyranoside methanol 0.375‐solvate, C₁₃H₂₄O₁₁·0.375CH₃OH, (I), was crystallized from a methanol–ethanol solvent system in a glycosidic linkage conformation, with ϕ′ (O5_Gal—C1_Gal—O1_Gal—C4_Man) = −68.2 (3)° and ψ′ (C1_Gal—O1_Gal—C4_Man—C5_Man) = −123.9 (2)°, where the ring is defined by atoms O5/C1–C5 (monosaccharide numbering); C1 denotes the anomeric C atom and C6 the exocyclic hydroxymethyl C atom in the βGalp and αManp residues, respectively. The linkage conformation in (I) differs from that in crystalline methyl α‐lactoside [methyl β‐d ‐galactopyranosyl‐(1→4)‐α‐d ‐glucopyranoside], (II) [Pan, Noll & Serianni (2005). Acta Cryst. C 61 , o674–o677], where ϕ′ is −93.6° and ψ′ is −144.8°. An intermolecular hydrogen bond exists between O3_Man and O5_Gal in (I), similar to that between O3_Glc and O5_Gal in (II). The structures of (I) and (II) are also compared with those of their constituent residues, viz. methyl α‐d ‐mannopyranoside, methyl α‐d ‐glucopyranoside and methyl β‐d ‐galactopyranoside, revealing significant differences in the Cremer–Pople puckering parameters, exocyclic hydroxymethyl group conformations and intermolecular hydrogen‐bonding patterns.     

5-Aminolevulinic Acid-induced Protoporphyrin IX Levels in Tissue of Human Malignant Brain Tumors

Protoporphyrin IX (PpIX) produced from exogenous, orally administered 5-aminolevulinic acid (ALA) displays high tumor-selective uptake and is being successfully employed for fluorescence-guided resection (FGR) of human malignant gliomas. Furthermore, the phototoxicity of PpIX can be utilized for photodynamic therapy (PDT) of brain tumors, which has been shown previously. Here, the absolute PpIX concentration in human brain tissue was investigated following oral ALA administration (20 mg kg⁻¹ b.w.). An extraction procedure was used to quantify PpIX in macroscopic tissue samples, weighing 0.013–0.214 g, obtained during FGR. The PpIX concentration was significantly higher in vital grade IV tumors (5.8 ± 4.8 μm , mean ± SD, range 0–28.2 μm , n = 8) as compared with grade III tumors (0.2 ± 0.4 μm , mean ± SD, range 0–0.9 μm , n = 4). There was also a large heterogeneity within grade IV tumors with PpIX displaying significantly lower levels in infiltration zones and necrotic regions as compared with vital tumor parts. The average PpIX concentration in vital grade IV tumor parts was in the range previously shown sufficient for PDT-induced tissue damage following irradiation. However, the feasibility of PDT for grade III brain tumors and for grade IV brain tumors displaying mainly necrotic tissue areas without solid tumor parts needs to be further investigated.     

The diprotonated 2,2‐(propane‐1,3‐di­yl)bis­(1,1,3,3‐tetra­methyl­guanidinium) cation: packing and conformational changes

Subject to packing with different anions, the title cation undergoes various conformational changes with significantly different N—C—C—C torsion angles, as well as different angles between the NCN₂ guanidine planes. The 2,2‐(propane‐1,3‐di­yl)bis­(1,1,3,3‐tetra­methyl­guanidinium) salts reported here, viz. the dibromide, C₁₃H₃₂N₆²⁺·2Br⁻, the tetra­phenyl­borate chloride, C₁₃H₃₂N₆²⁺·C₂₄H₂₀B⁻·Cl⁻, the tetra­chloro­mercurate, (C₁₃H₃₂N₆)[HgCl₄], and the bis­(trifluoro­methanesulfonate), C₁₃H₃₂N₆²⁺·2CF₃SO₃⁻, are dominated by strong inter­molecular N—H⋯X hydrogen bonds, which form different packing patterns.     

Gas chromatography coupled to atmospheric pressure ionization mass spectrometry (GC-API-MS): Review

Although the coupling of GC/MS with atmospheric pressure ionization (API) has been reported in 1970s, the interest in coupling GC with atmospheric pressure ion source was expanded in the last decade. The demand of a “soft” ion source for preserving highly diagnostic molecular ion is desirable, as compared to the “hard” ionization technique such as electron ionization (EI) in traditional GC/MS, which fragments the molecule in an extensive way. These API sources include atmospheric pressure chemical ionization (APCI), atmospheric pressure photoionization (APPI), atmospheric pressure laser ionization (APLI), electrospray ionization (ESI) and low temperature plasma (LTP). This review discusses the advantages and drawbacks of this analytical platform. After an introduction in atmospheric pressure ionization the review gives an overview about the history and explains the mechanisms of various atmospheric pressure ionization techniques used in combination with GC such as APCI, APPI, APLI, ESI and LTP. Also new developments made in ion source geometry, ion source miniaturization and multipurpose ion source constructions are discussed and a comparison between GC-FID, GC-EI-MS and GC-API-MS shows the advantages and drawbacks of these techniques. The review ends with an overview of applications realized with GC-API-MS.