Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

Concise total syntheses of the bioactive mesotricyclic diterpenoids jatrophatrione and citlalitrione

The highly functionalized [5.9.5] tricyclic framework resident in jatrophatrione (1) and citlalitrione (2) has been synthesized. The route begins with the tandem anionic oxy-Cope rearrangement/methylation/transannular ene cyclization of 21 and subsequent introduction of a conjugated enone double bond. Hydroxyl-directed 1,4-reduction of this functionality in 25 with LiAlH(4)/CuI/hexamethylphosphoramide/tetrahydrofuran sets the stage for the implementation of a Grob fragmentation and expedited generation of 27. Stereocontrolled intramolecular hydrosilylation allows for the subsequent introduction of a cyclic carbonate as in 53. This intermediate undergoes remarkably efficient, fully regiocontrolled Treibs reaction to generate 54, with this maneuver serving as a pivotal step for making 1 available five steps later. Treatment of 1 with m-chloroperbenzoic acid leads to 2, with attack occurring preferentially on a alpha-face of the double bond more remote to the carbonyl.     

A new class of C1-symmetric monosulfoximine ligands for enantioselective hetero Diels-Alder reactions

Quinoline-based C1-symmetric sulfoximines have been used as chiral ligands in copper-catalyzed asymmetric hetero Diels-Alder reactions leading to cycloadducts with up to 96% ee.     

Influence of initial oxygen coverage and magnetic moment on the NO decomposition on rhodium (111)

In this study, density functional theory calculations were performed to investigate the influence of oxygen preoccupation on the nitrogen oxide decomposition on rhodium. Besides gauging the coverage dependence of the adsorption energy of NO on the (111) rhodium facet, the influence of the initial oxygen coverage on the kinetics and thermodynamics of the nitrogen oxide decomposition reaction was also studied. The results are discussed with respect to a novel NOx decomposition catalyst. Furthermore, the influence of spin effects on the adsorption geometry as well as the adsorption energy is examined. It will be addressed why spin effects only have a minor influence on the behavior of NO on a rhodium surface.     

Thermochemistry of adducts of some bivalent transition metal bromides with 4-chloroaniline

The compounds [MBr₂(p-clan)₂] (where M is Mn(II), Fe(II), Co(II), Ni(II), Cu(II) or Zn(II); p-clan = 4-chloroaniline) were synthesized and characterized by melting points, elemental analysis, thermal analysis and electronic and IR spectroscopy. The enthalpies of solution of the adducts, metal(II) bromides and 4-chloroaniline in methanol, 1.2 M aqueous HCl or 25% (v/v) 1.2 M aqueous HCl in methanol were measures and by using thermochemical cycles, the following thermochemical parameters for the adducts have been determined: the standard enthalpies for the Lewis acid/base reactions (Δ_rH°), the standard enthalpies of formation (Δ_fH°), the standard enthalpies of decomposition (Δ_DH°), the lattice standard enthalpies (Δ_MH°) and the standard enthalpies of the Lewis acid/base reactions in the gaseous phase (Δ_rH°(g)). The mean bond dissociation enthalpies of the metal(II)-nitrogen coordinated bonds and the enthalpies of adduct formation in the gaseous phase have been estimated.     

Polysulfonylamine. CLX [1] Kristallstrukturen von Metall‐di(methansulfonyl)amiden. 10 [2] Die dreidimensionalen Koordinationspolymere M[(CH3SO2)2N] mit M = Kalium,Rubidium, Caesium (isotype Strukturen für M = K,Rb)

Polysulfonylamines. CLX. Crystal Structures of Metal Di(methanesulfonyl)amides. 10. The Three‐Dimensional Coordination Polymers M[(CH₃SO₂)₂N], where M is Potassium, Rubidium, Cesium (Isotypic Structures for M = K, Rb) Low‐temperature X‐ray crystal structures are reported for KA (monoclinic, space group P2₁/c, Z′ = 1), RbA (isotypic and isostructural with KA), and CsA (monoclinic, P2₁/n, Z′ = 1), where A^— denotes the anion obtained by deprotonation of the strong nitrogen acid (MeSO₂)₂NH. In KA and RbA, the anion is distorted into a rare C₁ conformation, whereas the standard C₂ conformation is retained in the cesium complex. The structures consist of three‐dimensional coordination networks, in which each cation adopts an irregular (O₆N)‐heptacoordination by forming close contacts to one (O, N)‐chelating, one (O, O)‐chelating and three κ¹O‐bonding ligands; however, the coordination number for Cs⁺ is effectively increased to 8 by a very short Cs···Cs contact distance of 422.5 pm. The crystal packings of the isotypic compounds KA and RbA display lamellar layer substructures that involve six independent ligand‐metal bonds and comprise an internal cation lamella and peripheral regions built up from anion monolayers; the 3D framework is completed by one independent M—O bond cross‐linking the layer substructures. In contrast, CsA features anion monolayers that intercalate planar zigzag chains of cations (Cs···Cs alternatingly 422.5 and 487.5 pm, Cs···Cs···Cs 135.7°), whereby each chain is surrounded and coordinated by four anion stacks and each anion stack connects two cation chains. All structures exhibit close C—H···A interanion contacts consistent with weak hydrogen bonding.     

Combinatorial organic materials research (COMR): design,synthesis and screening of a 225-membered materials library of liquid crystalline fluorinated p-quaterphenyls

The rapid solution phase synthesis of novel liquid crystalline materials is demonstrated by utilising combinatorial and parallel methods for the preparation of a library of 225 differently fluorinated 4,4"-dipropyl-p-quaterphenyls. Chemical diversity was introduced into the growing oligomers via a convergent synthetic sequence of iodinations and Suzuki cross-couplings by using various fluorinated phenyl building blocks. A highly efficient rapid parallel purification method was developed that provided HPLC-pure library members in amounts sufficient for the characterization of bulk properties.     

Solid-phase development of chiral phosphoramidite ligands for enantioselective conjugate addition reactions

The development of a method for the optimization of chiral ligands for the steric steering of enantioselective Cu-catalyzed conjugate additions of Znalkyls to enones is described. The method is based on combinatorial principles and solid-phase techniques. It includes the combinatorial synthesis of chiral bispidine-derived ligands embodying a phosphoramidite group on the solid phase and their investigation in immobilized form in the conjugate addition of ZnEt2 to cyclohexenone as test reaction. The best identified ligands were also synthesized separately and investigated in its soluble form. The results obtained for the polymer-bound ligands correctly mirrored the performance of the soluble ligands. The library embodied members giving ee values varying between 3 and 67%. The "positional scanning" approach proved to be invalid for the study of the ligand system, indicating that this approach in general should be applied with care. Taken together, the method allowed for rapid and efficient optimization of the ligands and led to the development of the first enantioselective, Cu-catalyzed conjugate addition reaction with a polymer-bound ligand.     

Sulphate preconcentration by anion exchange resin in flow injection and its turbidimetric determination in water

A preconcentration procedure was established for sulphate determination in rain waters at the mg/l level, employing a small column packed with the AG1-X8 (200-400 mesh) anionic resin inserted into a flow injection system. Sulphate determination was performed by using the turbidimetric method based on reaction with barium. For concentrations within 0.10 and 2.0 MgSO(2-)(4)/l, a throughput of 50 determinations/hr was achieved, and the relative standard deviation of results was better than 2%.     

Polynuclear manganese grids and clusters—A magnetic perspective

High nuclearity paramagnetic, spin-coupled transition metal clusters and grids are fascinating chemists and physicists partly because of their structural beauty, and the challenge of creating them, but also because of their novel physical properties. Magnetic interactions between the spin centers are a primary focus. This review will examine a selection of Mn(II) polynuclear grids and clusters, with nuclearities in the range Mn₄ to Mn₉. Theoretical treatments of the magnetic properties are discussed, and approaches to solving the exchange problem for ‘large’ spin systems related to computational difficulties. A freely available software package (MAGMUN4.1) is presented as a means of dealing simply with spin-coupled clusters in general, and symmetry reduction methods are discussed briefly as a means of dealing with ‘large’ spin systems.