The crystal and molecular structure of DI-trans-β-styrylmercury

The structure of di-trans-β-styrylmercury has been determined by single crystal X-ray methods from counter data. The compound crystallizes in the orthorhombic space group Pbcn with unit cell dimensions a 15.413(6), b 11.161(9), c 7.668(5) Å, V 1319(1) ų, D_calc 2.049 g/cm³, and Z = 4. The crystal was solved by conventional heavy atom techniques. The crystal consists of individual molecular units with the mercury atom located on a two fold axis of symmetry. The CHgC fragment is nearly linear with an angle of 178°. The β-styryl groups are oriented so that a dihedral angle of 66.8° is formed between the planes defined by HgC(1)C(2) and HgC(1)′C(2)′ fragments. The HgC bond distance is 2.07(4) Å.     

Electro-oxidation of carbon monoxide on well-ordered Pt(111)/Sn surface alloys

The electro-oxidation of CO on model platinum-tin alloy catalysts has been studied by ex-situ electrochemical measurements following the preparation of the Pt(111)/Sn(2x2) and Pt(111)/Sn(radical3 x radical3)R30 degrees surfaces. A surface redox couple, which is associated with the adsorption/desorption of hydroxide on the Sn sites, is observed at 0.28 V(RHE)/0.15 V(RHE) in H(2)SO(4) electrolyte on both surfaces. Evidence that it is associated with the adsorption of OH comes from ex-situ photoemission measurements, which indicate that the Sn atoms are in a metallic state at potentials below 0.15 V(RHE) and an oxidized state at potentials above 0.28 V(RHE). Specific adsorption of sulfate anions is not associated with the surface process since there is no evidence from photoemission of sulfate adsorption, and the same surface couple is observed in the HClO(4) electrolyte. CO is adsorbed from solution at 300 K, with saturation coverages of 0.37 +/- 0.05 and 0.2 +/- 0.05 ML, respectively. The adsorbed CO is oxidatively stripped at the potential coincident with the adsorption of hydroxide on the tin sites, viz., 0.28 V(RHE). This strong promotional effect is unambiguously associated with the bifunctional mechanism. The Sn-induced activation of water, and promotion of CO electro-oxidation, is sustained as long as the alloy structure remains intact, in the potential range below 0.5 V(RHE). The results are discussed in the light of the requirements for CO-tolerant platinum-based electrodes in hydrogen fuel cell anode catalysts and catalysts for direct methanol electro-oxidation.     

High-speed microwave-promoted hetero-Diels-Alder reactions of 2(1H)-pyrazinones in ionic liquid doped solvents

Inter- and intramolecular hetero-Diels-Alder reactions in a series of functionalized 2(1H)-pyrazinones were investigated under controlled microwave irradiation. The cycloaddition reactions were efficiently performed in sealed tubes, utilizing either a combination of 1,2-dichloroethane and a thermally stable ionic liquid, or 1,2-dichlorobenzene as reaction medium. In all cases, a significant rate-enhancement using microwave flash heating as compared to thermal heating was observed.     

Electron capture negative ion (ECNI) mass spectrometry of complex mixtures of chlorinated decanes and dodecanes: An approach to ECNI mass spectra of chlorinated paraffins in technical mixtures

The electron capture negative ion (ECNI) mass spectra of two complex mixtures of polychlorinated decanes (PCDe) and polychlorinated dodecanes (PCDo) are presented. The number of isomers in these mixtures is still high but is drastically reduced in comparison to technical products of chlorinated paraffins (CP), due to their fixed chain length. As a result, the mass spectra are simplified and less complex. Different modes of negative ion formation were observed in the spectra of the PCDe and PCDo. [M+Cl]^– adduct ions were the most abundant ions in the spectra of lower chlorinated molecules. Higher chlorinated isomers formed prominently [M-Cl]^– and [M-HCl]^– fragments besides [M+Cl]^–. Possible consequences for the determination of chlorinated paraffins by ECNI-MS that result from the variation in ion formation are addressed. Received: 18 August 1997 / Revised: 26 January 1998 / Accepted: 31 January 1998     

High facial diastereoselectivity in intra- and intermolecular reactions of chiral benzylic cations

Chiral carbenium ions can be attacked by arene nucleophiles with high facial diastereoselectivity (dr >/= 94/6). Benzylic cations, such as 2, were generated under acidic conditions and reacted with arenes in intra- and intermolecular Friedel-Crafts alkylation reaction. The depicted reaction 1 --> 3 represents one example for the unprecedented, highly diastereoselective intermolecular Friedel-Crafts alkylation reactions which were observed in this study.     

Screening, library-assisted identification and validated quantification of 23 benzodiazepines, flumazenil, zaleplone, zolpidem and zopiclone in plasma by liquid chromatography/mass spectrometry with atmospheric pressure chemical ionization

A liquid chromatographic/mass spectrometric assay with atmospheric pressure chemical ionization (LC/APCI-MS) is presented for fast and reliable screening and identification and also for precise and sensitive quantification in plasma of the 23 benzodiazepines alprazolam, bromazepam, brotizolam, camazepam, chlordiazepoxide, clobazam, clonazepam, diazepam, flunitrazepam, flurazepam, desalkylflurazepam, lorazepam, lormetazepam, medazepam, metaclazepam, midazolam, nitrazepam, nordazepam, oxazepam, prazepam, temazepam and tetrazepam, triazolam, their antagonist flumazenil and the benzodiazepine BZ1 (omega 1) receptor agonists zaleplone, zolpidem and zopiclone. It allows confirmation of the diagnosis of an overdose situation and monitoring of psychiatric patients' compliance. The analytes were isolated from plasma using liquid-liquid extraction and were separated on a Merck LiChroCART column with Superspher 60 RP Select B as the stationary phase. Gradient elution was performed using aqueous ammonium formate and acetonitrile. After screening and identification in the scan mode using the authors' LC/MS library, the analytes were quantified in the selected-ion monitoring mode. The quantification assay was fully validated. It was found to be selective proved to be linear from sub-therapeutic to over therapeutic concentrations for all analytes, except bromazepam. The corresponding reference levels the assay's accuracy and precision data for all studied substances are listed. The accuracy and precision data were within the required limits with the exception of those for bromazepam. The analytes were stable in frozen plasma for at least 1 month. The validated assay was successfully applied to several authentic plasma samples from patients treated or intoxicated with various benzodiazepines or with zaleplone, zolpidem or zopiclone. It has proven to be appropriate for the isolation, separation, screening, identification and quantification of the drugs mentioned above in plasma for clinical toxicology, e.g. in cases of poisoning, and forensic toxicology, e.g. in cases of driving under the influence of drugs.     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

Atomization of Al in a tungsten coil electrothermal atomic absorption spectrophotometer

Electrothermal atomic absorption spectrophotometry of Al in a tungsten coil atomizer was evaluated and applied for its determination in hemodialysis fluid. The system was mounted on a Varian Spectra AA-40 spectrophotometer with continuum background correction and all measurements, in peak height absorbance, were done at 309.3 nm. The purge gas was a mixture of 90% Ar plus 10% H(2). Observation height, gas flow, drying, pyrolysis and atomization steps were optimized. The heating program was carried out by employing a heating cycle in four steps: dry, pyrolysis, atomization and clean. The determination of Al in hemodialysis solutions was performed by using a matrix-matching procedure. Al in hemodialysis solutions was determined by TCA and by electrothermal atomization with a graphite tube atomizer. There is no differences between results obtained by both methods at a confidence level of 95%. The characteristic mass of Al by using the TCA was 39 pg and the detection limit was 2.0 mug l(-1).     

Intramolecular metal—double bond interactions : VII. Intramolecular cyclization of alkenyl derivatives of lithium,aluminum, gallium and indium

The intramolecular cyclization reactions of tri-1-hex-5-enyl Group III derivatives and of 1-hex-5-enyllithium have been investigated and it is proposed that the reactions may be depicted as internal addition across the terminal double bonds of the alkenyl species. The cyclization reaction proceeds more readily for the 1-hex-5-enyl derivatives than for any other chain length and is dependent on temperature, concentration and solvent. ¹H NMR data and cryoscopic molecular weight data are presented for several diisobutyialkenyl- and diisobutylalkyl-aluminum derivatives. These data have been interpreted in terms of a direct intramolecular interaction between the metal center and the π-electron system of the olefinic site. The intramolecular cyclization reactions for the 1-hept-6-enyl, 1-oct-7-enyl- and 1-undec-10-enylaluminum derivatives also were investigated and it was found that cyclization occurred only for the 1-hept-6-enyl derivative.     

Development of a multiplex microarray microsystem

A hybrid multiplex microarray microsystem has been developed that consists of 32 individually addressable array reaction chambers, supporting the use of multichannel pipettes for addition of up to 8 samples simultaneously. Discrimination between Campylobacter jejuni and Campylobacter coli bacteria was observed in DNA samples containing Campylobacter spp., with the same specificity and sensitivity as when compared to a full-size microarray. The spinloaded multiplex microarray microsystem described provides a novel and convenient test format for simultaneous low-density microarray analysis and is universally adaptable to other DNA, protein or small molecule microarray based applications.