Tuning of optical resonances in asymmetric microtube cavities

We tune optical resonances in rolled-up SiO/SiO(2) microtube cavities by gradually modifying the tube structure through asymmetrical postdeposition of SiO(2). Spectral blueshifts followed by redshifts of the resonant modes are observed in a thin-walled microtube (tube-I), which is attributed to a competition between shape deformation and effective increase of tube wall thickness. In contrast, only a monotonic redshift is detected when asymmetrical deposition is performed on a thick-walled microtube (tube-II). Distinct wavelength-dependent tuning was revealed in both kinds of tubes. Numerical calculations based on perturbation theory are carried out to explain and confirm the experimental results.     

Carrier envelope phase stabilization of a Yb:KGW laser amplifier

In this paper we report on the active stabilization of the carrier envelope phase (CEP) of a Yb:KGW chirped pulse amplifier laser system seeded by a Yb-doped solid-state Kerr-lens mode-locked oscillator. The regenerative amplifier delivers 180 fs CEP stable pulses of 30 μJ-1 mJ energy at a repetition rate tunable from 1 to 200 kHz. The bandwidth of the feedback loop was extended by a factor of 5 using a specially designed high-pass filter, which resulted in a dramatic decrease of CEP jitter below 0.45 rad after the amplifier.     

The determination of the past and the future of a physical system in quantum mechanics

The determination of the past and the future of a physical system are complementary aims of measurements. An optimal determination of the past of a system can be achieved by an informationally complete set of physical quantities. Such a set is always strongly noncommutative. An optimal determination of the future of a physical system can be obtained by a Boolean complete set of quantities. The two aims can be reconciled to a reasonable degree with using unsharp measurements.This work was partly supported by the Bundesministerium für Forschung und Technologie, Bonn, the Research Institute for Theoretical Physics, Helsinki, and the University of Turku Foundation, Turku.     

Probing decoherence with electromagnetically induced transparency in superconductive quantum circuits

Superconductive quantum circuits comprise quantized energy levels that may be coupled via microwave electromagnetic fields. Described in this way, one may draw a close analogy to atoms with internal (electronic) levels coupled by laser light fields. In this Letter, we present a superconductive analog to electromagnetically induced transparency that utilizes superconductive quantum circuit designs of present day experimental consideration. We discuss how a superconductive analog to electromagnetically induced transparency can be used to establish macroscopic coherence in such systems and, thereby, be utilized as a sensitive probe of decoherence.     

Realisation and metrological characterisation of thickness standards below 100 nm

High-accuracy film thickness measurements in the range below 100 nm can be made by various complex methods like spectral ellipsometry (SE), scanning force microscopy (SFM), grazing incidence X-ray reflectometry (GIXR), or X-ray fluorescence analysis (XRF). The measurement results achieved with these methods are based on different interactions between the film and the probe. A key question in nanotechnology is how to achieve consistent results on a level of uncertainty below one nanometre with different techniques.Two different types of thickness standards are realised. Metal film standards for X-ray techniques in the thickness range 10 to 50 nm are calibrated by GIXR with monochromatised synchrotron radiation of 8048 eV. The results obtained at four different facilities show excellent agreement. SiO₂ on Si standards for SE and SFM in the thickness range 6 to 1000 nm are calibrated by GIXR with monochromatised synchrotron radiation of 1841 eV and with a metrological SFM. Consistent results within the combined uncertainties are obtained with the two methods. Surfaces and interfaces of both types of standards are additionally investigated by transmission electron microscopy (TEM). PACS 61.10.Kw; 68.55.Jk; 06.20.Fn; 06.60.Mr; 07.79.Lh     

Tomonaga-Luttinger liquid features in ballistic single-walled carbon nanotubes: conductance and shot noise

We study the electrical transport properties of well-contacted ballistic single-walled carbon nanotubes in a three-terminal configuration at low temperatures. We observe signatures of strong electron-electron interactions: the conductance exhibits bias-voltage-dependent amplitudes of quantum interference oscillation, and both the current noise and Fano factor manifest bias-voltage-dependent power-law scalings. We analyze our data within the Tomonaga-Luttinger liquid model using the nonequilibrium Keldysh formalism and find qualitative and quantitative agreement between experiment and theory.     

Heavy quarks at RHIC and LHC within a partonic transport model

Production and space-time evolution of heavy quarks in central and non-central heavy-ion collisions at RHIC and LHC are studied with the partonic transport model Boltzmann Approach of MultiParton Scatterings (BAMPS). In addition to the initially created heavy quarks in hard parton scatterings during nucleon-nucleon collisions, secondary heavy quark production in the quark-gluon plasma is investigated and the sensitivity on various parameters is estimated. In BAMPS heavy quarks scatter with particles of the medium via elastic collisions, whose cross section is calculated with the running coupling and a more precise implementation of Debye screening. In this framework, we compute the elliptic flow and nuclear modification factor of heavy quarks and compare it to the experimental data.     

Stimulated Raman scattering in natural crystals of fluorapatite,Ca5(PO4)3F

Hexagonal Ca₅(PO₄)₃F, known as natural crystal fluorapatite and oldest host‐crystal for Ln³⁺‐lasant ions, is presented as a Raman‐active material. High‐order Raman‐induced χ⁽³⁾‐nonlinear processes are discovered in natural crystals of fluorapatite under picosecond pumping at 1.064 μm and 0.532 μm wavelength. A multitude of Stokes and anti‐Stokes components is generated in the ultraviolet, visible and near‐infrared spectral region by stimulated Raman scattering (SRS) and Raman four‐wave mixing (FWHM), resulting in a frequency comb with a width of 520 THz. The spectral lines are identified and attributed to the ν₁(A_g) vibration mode of the tetrahedral [PO₄] units which is related to a Raman shift of ω_SRS ≈ 965 cm⁻¹. The first Stokes steady‐state Raman gain coefficient in the near‐infrared spectral range is estimated to be >0.38 cm·GW⁻¹. Finally, a short review of SRS‐promoting vibration modes and observed χ⁽³⁾‐ nonlinear interactions in all known SRS‐active natural crystals (minerals) is given.