Stereocontrolled alkylative construction of quaternary carbon centers

Protocols for the stereodefined formation of alpha,alpha-disubstituted enolates of pseudoephedrine amides are presented followed by the implementation of these in diastereoselective alkylation reactions. Direct alkylation of alpha,alpha-disubstituted pseudoephedrine amide substrates is demonstrated to be both efficient and diastereoselective across a range of substrates, as exemplified by alkylation of the diastereomeric pseudoephedrine alpha-methylbutyramides, where both substrates are found to undergo stereospecific replacement of the alpha-C-H bond with alpha-C-alkyl, with retention of stereochemistry. This is shown to arise by sequential stereospecific enolization and alkylation reactions, with the alkyl halide attacking a common pi-face of the E- and Z-enolates, proposed to be opposite the pseudoephedrine alkoxide side chain. Pseudoephedrine alpha-phenylbutyramides are found to undergo highly stereoselective but not stereospecific alpha-alkylation reactions, which evidence suggests is due to facile enolate isomerization. Also, we show that alpha,alpha-disubstituted pseudoephedrine amide enolates can be generated in a highly stereocontrolled fashion by conjugate addition of an alkyllithium reagent to the s-cis-conformer of an alpha-alkyl-alpha,beta-unsaturated pseudoephedrine amide, providing alpha,alpha-disubstituted enolate substrates that undergo alkylation in the same sense as those formed by direct deprotonation. Methods are presented to transform the alpha-quaternary pseudoephedrine amide products into optically active carboxylic acids, ketones, primary alcohols, and aldehydes.     

Study of the slow electrolyte-induced changes in the TiO<Subscript>2</Subscript> hydrosol structure

Slow changes in the TiO₂ hydrosol structure induced by a small KCl additive were studied using the small-angle X-ray scattering. The initial sol of anisometric anatase nanocrystals stabilized by HCl was prepared. After addition of KCl scattering curves were measured regularly for 2 years. It was established the formation and the accumulation of small dense aggregates. A model of the slow structural changes in the TiO₂ sols with electrolyte additives comprising the two steps of aggregation was proposed. At first the larger anatase nanocrystals combine slowly forming the small dense aggregates through the oriented attachment mechanism. Then, at the critical size of such aggregates, they coagulate quickly forming the looser particles.     

The N-domain of angiotensin-converting enzyme specifically hydrolyzes the Arg-5-His-6 bond of Alzheimer's Abeta-(1-16) peptide and its isoAsp-7 analogue with different efficiency as evidenced by quantitative matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Chronic imbalance between production and degradation of the human amyloid-beta peptide (Abeta) is assumed to play an important role in pathogenesis of Alzheimer's disease (AD). Post-translational modifications of Abeta could influence its interactions with specifically cleaving proteases and, therefore, perturb the Abeta homeostasis. The angiotensin-converting enzyme (ACE) was previously shown to degrade non-modified Abeta in vitro and in cells. In the presented work, we investigated the effect of isomerization of Asp-7, a common non-enzymatic age-related modification found in AD-associated Abeta species, on hydrolysis of Abeta by ACE. Two synthetic peptides corresponding to the Abeta region 1-16 with either Asp or isoAsp residues in position 7 were examined as monomeric soluble substrates for the N- as well as for the C-domain of ACE. The use of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) coupled with the (18)O-labeled internal standard approach has allowed us to show that (i) the N-domain of ACE (N-ACE), but not the C-domain, selectively cleaves the Arg-5-His-6 bond in both peptides, and that (ii) N-ACE hydrolyzes the isoAsp-7 analogue more efficiently than the non-modified one. Our results demonstrate a new endopeptidase activity of N-ACE as well as high preference of the domain to recognize and hydrolyze the isomerized Abeta species that were earlier suggested to promote AD pathogenesis. The results suggest the need for further analysis of biological effects of isomerized Abeta and its interaction with ACE in AD pathogenesis.     

High-resolution liquid chromatography/electrospray ionization time-of-flight mass spectrometry combined with liquid chromatography/electrospray ionization tandem mass spectrometry to identify polyphenols from grape antioxidant dietary fiber

Grape antioxidant dietary fiber (GADF) is a dietary supplement that combines the benefits of both fiber and antioxidants that help prevent cancer and cardiovascular diseases. The antioxidant polyphenolic components in GADF probably help prevent cancer in the digestive tract, where they are bioavailable. Mass spectrometry coupled to liquid chromatography is a powerful tool for the analysis of complex plant derivatives such as GADF. We use a combination of MS techniques, namely liquid chromatography/electrospray ionization time-of-flight mass spectrometry (LC/ESI-TOF-MS) and liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) on a triple quadrupole, for the identification of the polyphenolic constituents of the soluble fraction of GADF. First, we separated the mixture into four fractions which were tested for phenolic constituents using the TOF system in the full scan mode. The high sensitivity and resolution of the TOF detector over the triple quadrupole facilitate the preliminary characterization of the fractions. Then we used LC/ESI-MS/MS to identify the individual phenols through MS/MS experiments (product ion scan, neutral loss scan, precursor ion scan). Finally, most of the identities were unequivocally confirmed by accurate mass measurements on the TOF spectrometer. LC/ESI-TOF-MS combined with MS/MS correctly identifies the bioactive polyphenolic components from the soluble fraction of GADF. High-resolution TOF-MS is particularly useful for identifying the structure of compounds with the same LC/ESI-MS/MS fragmentation patterns.     

First examples of the cocrystallization of diastereomers of chiral phosphorus compounds

The first three examples of the cocrystallization of covalent diastereomers of phosphorus compounds containing different chiral elements (centres of chirality on carbon and phosphorus, and an axis of chirality) are reported. The phenomenon can be attributed to the complementarity of the molecular shapes of the diastereomers. The X-ray data of all the crystals exhibit centrosymmetric statistics regardless of their very different natures. Dedicated to the memory of Professor Viktor Naumov (1932–2007).     

Nanomolar CFTR inhibition by pore-occluding divalent polyethylene glycol-malonic acid hydrazides

Inhibitors of the cystic fibrosis transmembrane conductance regulator (CFTR) chloride channel have potential application as antisecretory therapy in cholera. We synthesized mono- and divalent CFTR inhibitors consisting of a malonic acid hydrazide (MalH) coupled via a disulfonic stilbene linker to polyethylene glycols (PEGs; 0.2-100 kDa). IC50 values for CFTR inhibition were 10-15 microM for the monovalent MalH-PEGs, but substantially lower for divalent MalH-PEG-MalH compounds, decreasing from 1.5 to 0.3 microM with increasing PEG size and showing positive cooperativity. Whole-cell patch-clamp showed voltage-dependent CFTR block with inward rectification. Outside-out patch-clamp showed shortened single-channel openings, indicating CFTR pore block from the extracellular side. Luminally added MalH-PEG-MalH blocked by >90% cholera toxin-induced fluid secretion in mouse intestinal loops (IC50 approximately 10 pmol/loop), and greatly reduced mortality in a suckling mouse cholera model. These conjugates may provide safe, inexpensive antisecretory therapy.     

Study of the thymine molecule: equilibrium structure from joint analysis of gas-phase electron diffraction and microwave data and assignment of vibrational spectra using results of ab initio calculations

Thymine is one of the nucleobases which forms the nucleic acid (NA) base pair with adenine in DNA. The study of molecular structure and dynamics of nucleobases can help to understand and explain some processes in biological systems and therefore it is of interest. Because the scattered intensities on the C, N, and O atoms as well as some bond lengths in thymine are close to each other the structural problem cannot been solved by the gas phase electron diffraction (GED) method alone. Therefore the rotational constants from microvawe (MW) studies and differences in the groups of N-C, C=O, N-H, and C-H bond lengths from MP2 (full)/cc-pVQZ calculations were used as supplementary data. The analysis of GED data was based on the C(s) molecular symmetry according to results of the structure optimizations at the MP2 (full) level using 6-311G (d,p), cc-pVTZ, and cc-pVQZ basis sets confirmed by vibrational frequency calculations with 6-311G (d,p) and cc-pVTZ basis sets. Mean-square amplitudes as well as harmonic and anharmonic vibrational corrections to the internuclear distances (r(e)-r(a)) and to the rotational constants (B(e)(k)-B(0)(k), where k = A, B, C) were calculated from the quadratic (MP2 (full)/cc-pVTZ) and cubic (MP2 (full)/6-311G (d,p)) force constants (the latter were used only for anharmonic corrections). The harmonic force field was scaled using published IR and Raman spectra of the parent and N1,N3-dideuterated species, which were for the first time completely assigned in the present work. The main equilibrium structural parameters of the thymine molecule determined from GED data supplemented by MW rotational constants and results of MP2 calculations are the following (bond lengths in Angstroms and bond angles in degrees with 3sigma in parentheses): r(e) (C5=C6) = 1.344 (16), r(e) (C5-C9) = 1.487 (8), r(e) (N1-C6) = 1.372 (3), r(e) (N1-C2) = 1.377 (3), r(e) (C2-N3) = 1.378 (3), r(e) (N3-C4) = 1.395 (3), r(e) (C2=O7) = 1.210 (1), r(e) (C4=O8) = 1.215 (1), angle e (N1-C6=C5) = 123.1 (5), angle e (C2-N1-C6) = 123.7 (5), angle e (N1-C2-N3) = 112.8 (5), angle e (C2-N3-C4) = 128.0 (5), angle e (N3-C4-C5) = 114.8 (5), angle e (C6=C5-C9) = 124.4 (9). The experimental structural parameters are in good agreement with those from MP2 (full) calculations with use of cc-pVTZ and cc-pVQZ basis sets.     

Water interaction with hydrophobic and hydrophilic soot particles

The interaction of water with laboratory soots possessing a range of properties relevant for atmospheric studies is examined by two complementary methods: gravimetrical measurement of water uptake coupled with chemical composition and porosity analysis and HTDMA (humidified tandem differential mobility analyzer) inference of water uptake accompanied by separate TEM (transmission electron microscopy) analysis of single particles. The first method clarifies the mechanism of water uptake for bulk soot and allows the classification of soot with respect to its hygroscopicity. The second method highlights the dependence of the soot aerosol growth factor on relative humidity (RH) for quasi-monodisperse particles. Hydrophobic and hydrophilic soot are qualitatively defined by their water uptake and surface polarity: laboratory soot particles are thus classified from very hydrophobic to very hydrophilic. Thermal soot particles produced from natural gas combustion are classified as hydrophobic with a surface of low polarity since water is found to cover only half of the surface. Graphitized thermal soot particles are proposed for comparison as extremely hydrophobic and of very low surface polarity. Soot particles produced from laboratory flame of TC1 aviation kerosene are less hydrophobic, with their entire surface being available for statistical monolayer water coverage at RH approximately 10%. Porosity measurements suggest that, initially, much of this surface water resides within micropores. Consequently, the growth factor increase of these particles to 1.07 at RH > 80% is attributed to irreversible swelling that accompanies water uptake. Hysteresis of adsorption/desorption cycles strongly supports this conclusion. In contrast, aircraft engine soot, produced from burning TC1 kerosene in a gas turbine engine combustor, has an extremely hydrophilic surface of high polarity. Due to the presence of water soluble organic and inorganic material it can be covered by many water layers even below water saturation conditions. This soot demonstrates a gradual diameter growth factor (D(wet)/D(dry)) increase up to 1.22 at 93% relative humidity, most likely due to the presence of single particles with water soluble material heterogeneously distributed over their surface.     

Oxygen Microscopy by Two‐Photon‐Excited Phosphorescence

High‐resolution images of oxygen distributions in microheterogeneous samples are obtained by two‐photon laser scanning microscopy (2P LSM), using a newly developed dendritic nanoprobe with internally enhanced two‐photon absorption (2PA) cross‐section. In this probe, energy is harvested by a 2PA antenna, which passes excitation onto a phosphorescent metalloporphyrin via intramolecular energy transfer. The 2P LSM allows sectioning of oxygen gradients with near diffraction‐limited resolution, and lifetime‐based acquisition eliminates dependence on the local probe concentration. The technique is validated on objects with a priori known oxygen distributions and applied to imaging of pO₂ in cells.