Microwave-assisted three-component synthesis of 7-aryl-2-alkylthio-4,7-dihydro-1,2,4-triazolo[1,5-a]-pyrimidine-6-carboxamides and their selective reduction

Multicomponent reactions (MCRs) and microwave-assisted organic synthesis (MAOS) have been used as key methods for the synthesis of fused dihydropyrimidine derivatives. The three-component condensation of 3-amino-5-alkylthio-1,2,4-triazoles with aromatic aldehydes and acetoacetamides under microwave irradiation was developed as a rapid and efficient solution-phase method for the high-yielding preparation of 7-aryl-2-alkylthio-4,7-dihydro-1,2,4-triazolo[1,5-a]pyrimidine-6-carboxamide libraries. In addition, the selective reduction of the formed dihydrotriazolopyrimidines to trans-trans-2-alkylthio-7-aryl-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-a]pyrimidine-6-carboxamides was established. The described synthetic protocols provide rapid access to novel and diversely substituted dihydroazolopyrimidine libraries.     

The adsorption of triethylenediamine on Al(2)O(3)-II: hydrogen bonding to Al-OH groups

The hydrogen bonding of the triethylenediamine (TEDA) molecule to isolated Al-OH groups on partially dehydroxylated high area gamma-Al(2)O(3) powder has been studied using transmission IR spectroscopy. It has been found that TEDA adsorbs both singly and as multiple species to single Al-OH groups in clearly separable equilibrium stages of adsorption at 300 K. The reversible adsorption of a single TEDA molecule to Al-OH fits the Langmuir adsorption isotherm well, and the enthalpy of adsorption is found to be -15.6 +/- 0.5 kJ mol(-1) in the range of fractional coverage of 0.5-0.6. Red shifts of the Al-OH frequency from approximately -200 cm(-1) to approximately -1000 cm(-1) are observed as a result of -OH bonding to the N lone pair in the TEDA molecule.     

Direct Bioelectrocatalysis by NADP‐Reducing Hydrogenase from Pyrococcus furiosus

The direct bioelectrocatalysis by an NAD(P)‐reducing hydrogenase is reported for the first time. In contrast to previous attempts to involve similar enzymes in bioelectrocatalysis [1–4], which were in fact unsuccessful, in our report an effective electrocatalysis by Pyrococcus furiosus hydrogenase is convincingly shown by (i) achievement of the hydrogen equilibrium potential and (ii) a high current of hydrogen oxidation (0.3 mA cm^?2 at 100 mV overpotential and at 75 °C). The latter is just a few times lower compared to enzyme electrodes based on NAD(P)‐independent hydrogenases.     

Dimerization mechanism of bis(triphenylphosphine)copper(I) tetrahydroborate: proton transfer via a dihydrogen bond

The mechanism of transition-metal tetrahydroborate dimerization was established for the first time on the example of (Ph(3)P)(2)Cu(η(2)-BH(4)) interaction with different proton donors [MeOH, CH(2)FCH(2)OH, CF(3)CH(2)OH, (CF(3))(2)CHOH, (CF(3))(3)CHOH, p-NO(2)C(6)H(4)OH, p-NO(2)C(6)H(4)N═NC(6)H(4)OH, p-NO(2)C(6)H(4)NH(2)] using the combination of experimental (IR, 190-300 K) and quantum-chemical (DFT/M06) methods. The formation of dihydrogen-bonded complexes as the first reaction step was established experimentally. Their structural, electronic, energetic, and spectroscopic features were thoroughly analyzed by means of quantum-chemical calculations. Bifurcate complexes involving both bridging and terminal hydride hydrogen atoms become thermodynamically preferred for strong proton donors. Their formation was found to be a prerequisite for the subsequent proton transfer and dimerization to occur. Reaction kinetics was studied at variable temperature, showing that proton transfer is the rate-determining step. This result is in agreement with the computed potential energy profile of (Ph(3)P)(2)Cu(η(2)-BH(4)) dimerization, yielding [{(Ph(3)P)(2)Cu}(2)(μ,η(4)-BH(4))](+).     

Metal‐Ion‐Binding Analogs of Ribonucleosides: Preparation and Formation of Ternary Pd2+ and Hg2+ Complexes with Natural Pyrimidine Nucleosides

Four metal‐ion‐binding nucleosides, viz. 2,6‐bis(1‐methylhydrazinyl)‐9‐(β‐D ‐ribofuranosyl)‐9H‐purine ( 2a ) and its N‐acetylated derivative, 2b , 2,4‐bis(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)‐5‐(β‐D ‐ribofuranosyl)pyrimidine ( 3 ), and 2,4‐bis(1‐methylhydrazinyl)‐5‐(β‐D ‐ribofuranosyl)pyrimidine ( 4 ) have been synthesized. The ability of these nucleosides and the previously prepared 2,6‐bis(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)‐9‐(β‐D ‐ribofuranosyl)‐9H‐purine to form Pd²⁺‐ and Hg²⁺‐mediated complexes with uridine has been studied by ¹H‐NMR spectroscopy. To obtain additional support for the interpretation of the NMR data, comparative measurements on the ternary‐complex formation between pyridine‐2,6‐dicarboxamide ( 5 ), pyrimidine nucleosides, and K₂PdCl₄ were carried out.     

Exploratory analysis of human urine by LC–ESI-TOF MS after high intake of olive oil: understanding the metabolism of polyphenols

Olive oil polyphenols have important biological properties which closely depend on their bioavailability; it is, therefore, essential to understand how polyphenols are absorbed, metabolized, and eliminated from the body. An analytical method based on rapid-resolution liquid chromatography (RRLC) coupled with mass spectrometric detection with a time-of-flight analyzer (RRLC–ESI-TOF MS) has been developed for analysis of the main olive oil phenolic compounds and their metabolites in human urine. Urine samples from ten healthy volunteers were collected before and 2, 4, and 6 h after intake of 50 mL extra-virgin olive oil. The proposed method includes liquid–liquid extraction with ethyl acetate, which provides extraction recoveries of the phenolic compounds studied between 35 and 75% from spiked urine samples. Good repeatability was obtained—the relative standard deviations (RSDs) of peak areas in intra-day and inter-day studies were 4.3 and 6.5%, respectively. Statistical studies enabled us to discriminate between urine samples before and after intake, and facilitated the search for m/z values enabling this discrimination. Based on the very accurate mass information and the isotopic pattern provided by the TOF MS analyzer, together with other available information, ten of these biomarkers and more than 50 metabolites, obtained through phase I and phase II biotransformation reactions, were tentatively identified. Additionally, kinetic studies were conducted on the metabolites identified as possible biomarkers; for most of the compounds concentrations were maximum in the first two hours.     

Helicenes Built from Silacyclopentadienes via Ring‐by‐Ring Knitting of the Helical Framework

Despite the apparent diversity of the protocols developed for the synthesis of helicenes, they essentially follow the same strategy: the closure of one, or several, internal rings in a key step. Herein, we report the synthesis of a new family of the heterohelicenes consisting of fused silacyclopentadiene rings formed via a facile and novel process. The treatment of oligo(alkynilydenesilylene) precursors of type H₂C=CH?(SiMe₂?C≡C)_n?R (n=3–7), bearing a vinyl group on the terminal silicon atom, with 9‐borabicyclononane leads first to 1,2‐hydroboration of the terminal double bond which then continues with a cascade of intramolecular 1,1‐carboboration reactions accompanied with the closure of a new silole ring after each step affording the target silahelicenes with, currently, up to seven condensed silole rings and with excellent yields. According XRD analysis, the seven fused silole rings of the heptacyclic compound 11 b form an almost complete turn of a helix. The presented one‐pot sequence of reactions is the first example of ring‐by‐ring knitting of a helical framework starting from easily available linear precursors.     

Hybrid silica-organic material with immobilized amino groups: surface probing and use for electrochemical determination of nitrite ions

A sol–gel based hybrid process was developed by manipulating different techniques in sol–gel process to synthesize γ-alumina and (CuO, CuO + ZnO) doped γ-alumina spherical particles. Catalysts having spherical geometry have an important advantage over powders or pellets which are impervious to fluids, when packed in a reactor. Boehmite sol was used as alumina precursor for synthesizing porous γ-alumina and doped materials. γ-alumina particles having 5 wt% CuO, 4 wt% CuO + 1 wt% ZnO, 3 wt% CuO + 2 wt% ZnO and 2 wt% CuO + 3 wt% ZnO were prepared by adding required amounts of Cu(NO₃)₂ and Zn(NO₃)₂ solutions prior to gelation of the sol. Methanol dehydration studies were carried out by employing these synthesized catalysts. Hundred percent conversion of methanol to dimethyl ether was observed with (4 wt% CuO + 1 wt% ZnO)-γ-alumina and (5 wt% CuO)-γ-alumina microspheres at 325 and 350 °C, respectively.     

Abnormal reactions of 2‐methoxy‐4,9‐dimethyl‐1‐nitroacridine with selenous acid and selenium(IV) oxide. Synthesis of 1H‐selenopheno[2,3,4‐k,l]acridine‐1‐one: A new seleno‐containing ring system

Unusual course of the reaction was revealed on the oxidation of functionally substituted acridine containing the activated methyl groups by well‐known oxidants, such as selenous acid and selenium(IV) oxide. Treatment of 2‐methoxy‐4,9‐dimethyl‐1‐nitroacridine ( 5 ) with an excess of H₂SeO₃ in boiling ethanol gave a mixture of the normal reaction products, 2‐methoxy‐4‐methyl‐1‐nitro‐9‐formylacridine ( 11 ) (isolated yield 29%) and 2‐methoxy‐4‐methyl‐1‐nitroacridine‐9‐carboxylic acid ( 12 ) (36%), together with an abnormal product, 3‐methoxy‐5‐methyl‐1H‐selenopheno[2,3,4‐k,l]acridine‐1‐one ( 13 ) (21%), which is the first example of a new seleno‐containing ring system. With the use of SeO₂ the yield of selenolactone 13 was much lower. J. Heterocyclic Chem., 2011.