Wetting: Inverse Dynamic Problem and Equations for Microscopic Parameters

Movement of a liquid meniscus in a low-diameter capillary while it is being filled or emptied is considered. The liquid is nonvolatile. Assuming low Reynolds number and low capillary number, the liquid-gas interface shape is studied. Angles of inclination of this boundary to the solid near the contact line are small. Consideration is given to the inverse problem in wetting dynamics: to establish an analytic expression for the universal constant that influences the dynamics of a three-phase contact line. Inverse relations for microscopic parameters in terms of macroscopic measured values obtained in experiments with a meniscus moving through a capillary are derived. The inverse relations are substantiated independently. To do so, numerical experiments for a van der Waals liquid have been carried out, using the de Gennes model of partial wetting. General formulas for microparameters agree well with numerical experiments. The article provides the similarity criterion which influences the wetting in the case of a van der Waals liquid meniscus. The inverse dynamic problem for both an advancing and a receding meniscus is solved. A relation for the critical speed of meniscus recession is proposed. Two contact angles for a meniscus are discussed. Behavior of dynamic contact angles in the vicinity of the critical speed is studied. One of the angles is shown to vanish at less than the critical speed, and the other one, exactly at the critical speed. In the case of an advancing meniscus the equations for microparameters are valid for both partial and complete wetting. The proposed inverse expression for complete wetting allows determination of the maximum precursor film thickness and its dependence on the motion speed (also determination of the Hamaker constant in the case of a van der Waals liquid). Copyright 2000 Academic Press.     

Aromatic vs aliphatic C-H cleavage of alkyl-substituted pyridines by (PNPiPr)Re compounds

Both (PNP)Re(H)(4) and (PNP)ReH(cyclooctyne) (PNP(i)(Pr) = ((i)Pr(2)PCH(2)SiMe(2))(2)N) react with alkylpyridines NC(5)H(4)R to give first (PNP)ReH(2)(eta(2)-pyridyl) and cyclooctene and then, when not sterically blocked, (PNP)Re(eta(2)-pyridyl)(2) and cyclooctane. The latter are shown by NMR, X-ray diffraction, and DFT calculations to have several energetically competitive isomeric structures and pyridyl N donation in preference to PNP amide pi-donation. DFT studies support NMR solution evidence that the most stable bis pyridyl structure is one that is doubly eta(2)- with the pyridyl N donating to the metal center. When both ortho positions carry methyl substituents, cyclooctane and the carbyne complex (PNP)ReH(tbd1;C-pyridyl) are produced. Excess 2-vinyl pyridine reacts with (PNP)Re(H)(4) preferentially at the vinyl group, to give 2-ethyl pyridine and the sigma-vinyl complex (PNP)ReH[eta(2)-CH=CH(2-py)]. The DFT and X-ray structures show, by various comparisons, the ability of the PNP amide nitrogen to pi-donate to an otherwise unsaturated d(4) Re(III) center, showing short Re-N distances consistent with the presence of pi-donation.     

Formation pathways and structure—Property interrelationship of 3-imino-1-methyl-5,5-dialkyl-4,7,7-tricyano-2-oxabicyclo-[2.2.1]heptane derivatives

The problems of the structure—property interrelationship of 3-imino-2-oxabicyclo[2.2.1]heptane derivatives are discussed on the basis of x-ray diffraction studies (XDS). A pathway for the formation of the bicyclic compounds is proposed, and the realization of spirans in the reaction of sym-tetracyanoethane with conjugated cyclic systems containing s-cis C=C and C=O fragments is substantiated. The factors responsible for the syn orientation of the oxygen atom and the N-substituent of the imino group are analyzed. It is shown that a change in the steric hindrance in the bicyclic compounds leads to a change in the conformation of the latter. The reasons for the shortening of the C_sp3-C_sp3, C_sp3-C_sp and C=N exo bonds and the correlation of the XDS and IR spectroscopic data are examined. From the XDS data for N-bromo-substituted imines, a model for Br⁺...NC electrophilic attack was proposedCommunication 16 from the series Chemistry of 1,1,2,2-tetracyanoethane. See [1] for Communication 15.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 519–526, April, 1991.     

Production of hybrid 16-membered macrolides by expressing combinations of polyketide synthase genes in engineered Streptomyces fradiae hosts

Combinations of the five polyketide synthase (PKS) genes for biosynthesis of tylosin in Streptomyces fradiae (tylG), spiramycin in Streptomyces ambofaciens (srmG), or chalcomycin in Streptomyces bikiniensis (chmG) were expressed in engineered hosts derived from a tylosin-producing strain of S. fradiae. Surprisingly efficient synthesis of compounds predicted from the expressed hybrid PKS was obtained. The post-PKS tailoring enzymes of tylosin biosynthesis acted efficiently on the hybrid intermediates with the exception of TylH-catalyzed hydroxylation of the methyl group at C14, which was efficient if C4 bore a methyl group, but inefficient if a methoxyl was present. Moreover, for some compounds, oxidation of the C6 ethyl side chain to an unprecedented carboxylic acid was observed. By also expressing chmH, a homolog of tylH from the chalcomycin gene cluster, efficient hydroxylation of the 14-methyl group was restored.     

Sulfonated and sulfoacylated poly(styrene-divinylbenzene) copolymers as packing materials for cation chromatography

Three different types of cation exchangers were produced from four basic poly(styrene-divinylbenzene) substrates with different properties. Porous PS-DVB resin beads were functionalized by sulfonation and sulfoacylation under various conditions to produce sulfonated resins with exchange capacities of 0.03-1.80 mM g(-1). The matrix with 50% of cross-linking is most suitable for updating by the proposed technique. Sulfuric and chlorosulfonic acids were used as the reagents for sulfonation. The sulfonating conditions, capacities, and the technique of the synthesis are given. The effects of parameters of the sulfonation reaction and the composition of the reactionary mixture on ion-exchange capacity of the sorbents were investigated. Selectivity and efficiency of the separation of some inorganic cations and derivatives of amines and hydrazines on the resins obtained are compared by ion chromatography with conductometric detection. As a result, the sulfoacylated resin was proved more efficient for the separation of these analytes. The resolution of the analytes strongly depends on the degree of functionalization. The best performance about 19,000 plates m(-1) was obtained using the sulfopropionylated beads with an ion-exchange capacity of 0.3 mM g(-1). The prepared sulfoacylated cation exchanger was compared with the commercially available Dionex CS-12 packing material. It was found that the separation of alkaline ions and 1,1-dimethylhydrazine (UDMH) were much better that those for the commercial material.     

New Chemicals Suppressing SARS-CoV-2 Replication in Cell Culture

Candidates to being inhibitors of the main protease (Mpro) of SARS-CoV-2 were selected from the database of Voronezh State University using molecular modeling. The database contained approximately 19,000 compounds represented by more than 41,000 ligand conformers. These ligands were docked into Mpro using the SOL docking program. For one thousand ligands with best values of the SOL score, the protein–ligand binding enthalpy was calculated by the PM7 quantum-chemical method with the COSMO solvent model. Using the SOL score and the calculated protein–ligand binding enthalpies, eighteen compounds were selected for the experiments. Several of these inhibitors suppressed the replication of the coronavirus in cell culture, and we used the best three among them in the search for chemical analogs. Selection among analogs using the same procedure followed by experiments led to identification of seven inhibitors of the SARS-CoV-2 replication in cell culture with EC50 values at the micromolar level. The identified inhibitors belong to three chemical classes. The three inhibitors, 4,4-dimethyldithioquinoline derivatives, inhibit SARS-CoV-2 replication in Vero E6 cell culture just as effectively as the best published non-covalent inhibitors, and show low cytotoxicity. These results open up a possibility to develop antiviral drugs against the SARS-CoV-2 coronavirus.     

A Modular Approach to Atropisomeric Bisphosphines of Diversified Electronic Density on Phosphorus Atoms

The series of C₂-symmetric biaryl core-based non-racemic bisphosphines possessing substituents of different electronic properties: both EDG and EWG were obtained in a short sequence of good yielding transformations, started from commercial 1,3-dimethyl-2-nitrobenzene. Several different approaches leading to the desirable ligands were practically evaluated. Notably, the synthesis of the entire series of ligands could be performed with the utilization of a single early-stage precursor DIDAB (6,6′-diiodo-2,2′,4,4′-tetramethylbiphenyl-3,3′-diamine), which could be easily obtained in enantiomerically pure form. The obtained compounds at concentrations of 50 and 200 µM showed various biological activity against normal human dermal fibroblast, ranging from inactivity through time-dependent action and ending up with high toxicity.     

Dual-State Emission of 2-(Butylamino)Cinchomeronic Dinitrile Derivatives

New representatives of 2-(butylamino)cinchomeronic dinitrile derivatives were synthesized as promising fluorophores showing dual-state emission. To characterize the influence of the length (from methyl to butyl) and the structure (both linear and branched) of the alkyl substituent at the amino nitrogen atom, the spectral fluorescence properties of all synthesized compounds were carefully studied both in solution and in solid state. The highest photoluminescence quantum yield values of 63% were noted for solutions of 2-(butylamino)-6-phenylpyridine-3,4-dicarbonitrile in DCM and 2-(butylamino)-5-methyl-6-phenylpyridine-3,4-dicarbonitrile in toluene.     

MnO2-Mediated Oxidative Cyclization of “Formal” Schiff’s Bases: Easy Access to Diverse Naphthofuro-Annulated Triazines

A different type of MnO₂-induced oxidative cyclization of dihydrotriazines has been developed. These dihydrotriazines are considered as a “formal” Schiff’s base. This method provided easy access to naphthofuro-fused triazine via the C-C/C-O oxidative coupling reaction. The reaction sequence comprised the nucleophilic addition of 2-naphthol or phenol to 1,2,4-triazine, followed by oxidative cyclization. The scope and limitations of this novel coupling reaction have been investigated. Further application of the synthesized compound has been demonstrated by synthesizing carbazole-substituted benzofuro-fused triazines. The scalability of the reaction was demonstrated at a 40 mmol load. The mechanistic study strongly suggests that this reaction proceeds through the formation of an O-coordinated manganese complex.