Electrochemiluminescence Bioassays with a Water‐Soluble Luminol Derivative Can Outperform Fluorescence Assays

The most efficient and commonly used electrochemiluminescence (ECL) emitters are luminol, [Ru(bpy)₃]²⁺, and derivatives thereof. Luminol stands out due to its low excitation potential, but applications are limited by its insolubility under physiological conditions. The water‐soluble m‐carboxy luminol was synthesized in 15 % yield and exhibited high solubility under physiological conditions and afforded a four‐fold ECL signal increase (vs. luminol). Entrapment in DNA‐tagged liposomes enabled a DNA assay with a detection limit of 3.2 pmol L^?1, which is 150 times lower than the corresponding fluorescence approach. This remarkable sensitivity gain and the low excitation potential establish m‐carboxy luminol as a superior ECL probe with direct relevance to chemiluminescence and enzymatic bioanalytical approaches.     

Synthese und Metallierung des Diaminosiloxans O(SiiPr2NH2)2

Synthesis and Metalation of the Diaminosiloxane O(SiiPr₂NH₂)₂ The 1,3‐diaminoldisiloxane O(SiiPr₂NH₂)₂ ( 1 ) was obtained from the reaction of O(SiiPr₂Cl)₂ with NH₃. The reactions of 1 with AlEt₃ or GaEt₃ produced the compounds [O{SiiPr₂N(H)MEt₂}{SiiPr₂NMEt}]₂ ( 2 : M = Al; 3 : M = Ga). The crystal structures of 2 and 3 were determined by single crystal X‐ray diffraction, showing a polycyclic M₄N₄Si₄O₂ core structure of these molecules.     

New Rare‐Earth Metal Germanides RE2Ge9 (RE = Nd,Sm) by Thermal Decomposition of High‐Pressure Phases REGe5

The rare‐earth metal germanides RE₂Ge₉ (RE = Nd, Sm) have been prepared by thermal decomposition of the metastable high‐pressure phases REGe₅ at ambient pressure. The compounds adopt an orthorhombic unit cell with a = 396.34(4) pm; b = 954.05(8) pm and c = 1238.4(1) pm for Nd₂Ge₉ and a = 395.46(7) pm; b = 946.4(2) pm and c = 1232.1(3) pm for Sm₂Ge₉. Crystal structure refinements reveal space group Pmmn (No. 59) for Nd₂Ge₉. The atomic pattern resembles an ordered defect variety of the pentagermanide motif REGe₅ (RE = La; Nd, Sm, Gd, Tb) comprising corrugated germanium layers. These condense into a three‐dimensional network interconnected by eight‐coordinated germanium atoms. The resulting framework channels along [100] enclose the neodymium atoms. With respect to the atomic arrangement of the pentagermanides, half of the interlayer germanium atoms are eliminated in an ordered way so that occupied and empty germanium columns alternate along [001]. The rare‐earth metal atoms of both types of compounds, REGe₅ and RE₂Ge₉, exhibit the electronic states 4f ³ and 4f ⁵ (oxidation state +3) for neodymium and samarium, respectively, evidencing that the modification of the germanium network leaves the electron configuration of the metal atoms unaffected.     

Non-Oxido-Vanadium(IV) Metalloradical Complexes with Bidentate 1,2-Dithienylethene Ligands: Observation of Reversible Cyclization of the Ligand Scaffold in Solution

Derivatives of 1,2-dithienylethene (DTE) have superb photochromic properties due to an efficient reversible photocyclization reaction of their hexatriene structure and, thus, have application potential in materials for optoelectronics and (multi-responsive) molecular switches. Transition-metal complexes bearing switchable DTE motifs commonly incorporate their coordination site rather distant from the hexatriene system. In this work the redox active ligand 1,2-bis(2,5-dimethylthiophen-3-yl)ethane-1,2-dione is described, which reacts with [V(TMEDA)₂Cl₂] to give a rare non-oxido vanadium(IV) species 3(M,M/P,P) . This blue complex has two bidentate en-diolato ligands which chelate the V^IV center and give rise to two five-membered metallacycles with the adjacent hexatriene DTE backbone bearing axial chirality. Upon irradiation with UVA light or prolonged heating in solution, the blue compound 3(M,M/P,P) converts into the purple atropisomer 4(para,M/para,P) . Both complexes were isolated and structurally characterized by single-crystal X-ray diffraction analysis (using lab source and synchrotron radiation). The antiparallel configuration (M or P helicity) present in both 3(M,M/P,P) and 4(para,M/para,P) is a prerequisite for (reversible) 6π cyclization reactions. A CW EPR spectroscopic study reveals the metalloradical character for 3(M,M/P,P) and 4(para,M/para,P) and indicates dynamic reversible cyclization of the DTE backbone in complex 3(M,M/P,P) at ambient temperature in solution.     

Study of an ultrahigh-numerical-aperture fiber continuum generation source for optical coherence tomography

The axial resolution of optical coherence tomography images is primarily dependent on the bandwidth of the illumination source. Continuum generation is one way to generate the single-mode, high-bandwidth light needed for point illumination. We present an inexpensive and easy-to-implement augmentation to a Ti:sapphire laser that widens the bandwidth from 20 to over 200 nm with commerically available ultrahigh-numerical-aperture fiber. This technique can provide a readily available broad-bandwidth source for researchers and a practical enhancement to a fiber-optic optical coherence tomography system.     

Atomistic Simulation Study of Cu0.327Ni0.673 Alloys: from Solid Solution to Phase Segregation

We present a combined Monte‐Carlo/molecular dynamics study of a Cu_0.327Ni_0.673 alloy system. On the basis of nearest‐neighbor coordination number analyses atomic clustering and phase segregation is explored. Along this line, free energy profiles are calculated and separated into entropic and energetic contributions. The competition of both terms was found in accordance to the experimental phase diagrams (phase separation of the solid solution below about 600 Kelvin). Two independent simulation runs were performed. At 1000 Kelvin the observed configurations correspond to solid solutions exhibiting a weak tendency to cluster atoms of identical species. At room temperature the energetic favoring of atomic separation is clearly dominant and leads to the formation of Ni‐rich and Cu‐rich domains. The latter are separated by interfacial regions whose width ranges from 0.5 to 1 nanometers.     

Three New Iron(II) Thiocyanato Coordination Polymers Based on 4,4′‐Bipyridine as Ligand and the Influence of Methanol on Their Structures

Reaction of iron(II) thiocyanate with 4,4‐bipyridine (bipy) in methanol leads to the formation of three new solvates of different composition depending on the reaction conditions: At room temperature two new ligand‐rich 1:2 (1:2 = ratio between metal and N‐donor ligand) polymorphic forms [Fe(NCS)₂(bipy)₂ · 2MeOH]_n ( 1I ) and [Fe(NCS)₂(bipy)(MeOH)₂ · (bipy)]_n ( 1II ) are obtained, whereas solvothermal conditions leads to the formation of the new ligand‐deficient 1:1 compound [{Fe(NCS)₂(bipy)(MeOH)}₂]_n ( 2 ). All crystal structures were determined by X‐ray single crystal structure analysis. In the crystal structure of modification 1I the metal atoms are coordinated by four bridging bipy ligands, which connect them into layers. The methanol molecules occupy voids in the structure. Compared to 1I in modification 1II the crystal structure contains of linear Fe–bipy–Fe chains, which are further connected by hydrogen bonds between coordinating MeOH and noncoordinated bipy ligands into layers. The ligand‐deficient 1:1 compound 2 shows a completely different coordination topology with linear Fe–bipy–Fe chains, which are connected by coordinating methanol molecules into double‐chains. In all compounds the thiocyanato anions are terminal N‐bonded to the metal atoms. Investigation of the thermal behavior of compound 1I shows a two‐step decomposition, in which ligand‐deficient intermediates are formed. Magnetic measurements on 1I reveal Curie–Weiss paramagnetism with increasing antiferromagnetic interactions on cooling.     

Porous Media Compressed-Air Energy Storage (PM-CAES): Theory and Simulation of the Coupled Wellbore–Reservoir System

Expansion in the supply of intermittent renewable energy sources on the electricity grid can potentially benefit from implementation of large-scale compressed air energy storage in porous media systems (PM-CAES) such as aquifers and depleted hydrocarbon reservoirs. Despite a large government research program 30 years ago that included a test of air injection and production in an aquifer, and an abundance of literature on CAES mostly relevant to caverns, there remain fundamental questions about the hydrologic and energetic performance of PM-CAES. We have developed rigorous simulation capabilities for PM-CAES that include modeling the coupled wellbore–reservoir system. Through consideration of a prototypical PM-CAES wellbore–reservoir system representing a depleted hydrocarbon reservoir, we have simulated 100 daily cycles of PM-CAES. We find that (1) PM-CAES can store energy but that pervasive pressure gradients in PM-CAES result in spatially variable energy storage density in the reservoir, (2) the wellbore–reservoir storage component of PM-CAES is very efficient, (3) cap-rock and hydrologic seals along with proper sizing of the PM-CAES reservoir prevent excess pressure diffusion from being a problem, and (4) injection and production of air does not significantly mobilize residual liquid water in the reservoir.