On the determination of solutions of simultaneous Pell equations $$x^{2}-(a^{2}-1)y^{2}=y^{2}-pz^{2}=1$$ x 2 - ( a 2 - 1 ) y 2 = y 2 - p z 2 = 1

Periodica Mathematica Hungarica - In this paper, we consider the simultaneous Pell equations 0.1 $$\begin{aligned} x^{2}-(a^{2}-1)y^{2}= & {} 1, \nonumber \\ y^{2}-pz^{2}= & {} 1,...     

A selective high-performance liquid chromatography method for the determination of reboxetine in bulk drug and tablets

Reboxetine is used as a selective noradrenaline reuptake inhibitor for the treatment of major depressive disorders. It is effective in the treatment of severe depression and safer to use than traditional tricyclic antidepressants. In this study, a novel, simple, and rapid stability-indicating high-performance liquid chromatography (HPLC) method for reboxetine methansulfonate was successfully developed and validated for the assay of tablets. The method was used to quantify reboxetine in tablets; it employed a C18 column (150 x 4.6 mm id) with an isocratic mobile phase consisting of methanol-phosphate buffer (pH 7, 0.02 M; 55 + 45, v/v) at a flow rate of 1.0 mL/min. Reboxetine was detected by an ultraviolet detector at 277 nm. The retention time of reboxetine was about 4.5 min. The developed HPLC method was validated with respect to linearity, precision, sensitivity, accuracy, and selectivity. The method was linear over the concentration range 1-50 microg/mL (r = 0.9999). The limits of detection and the quantitation of reboxetine were 0.1 and 0.3 microg/mL, respectively. The relative standard deviation values for intraday and interday precision were 0.78-1.01 and 1.08-1.37%, respectively. Selectivity was validated by subjecting a stock solution of reboxetine to neutral, acid, and alkali hydrolysis, as well as oxidation, dry heat treatment, and photodegradation. The peaks of the degradation products did not interfere with the peak of reboxetine. The results indicated that the proposed method could be used in a stability assay. The proposed method was successfully applied to the determination of reboxetine in tablets. Excipients present in the tablets did not interfere with the analysis.     

Competing Formations of Oxonium and Carbonyl Ylides with Carbonylcarbenes

A series of 2‐mono‐ and 2,2‐disubstituted 1,3‐dioxepin derivatives, two of which also had a carbonyl function in one of their 2‐R groups, were prepared and reacted with dimethyl diazomalonate with copper(II) acetylacetonate as a catalyst. Ylide formation probabilities with allyl ether and/or carbonyl functions were investigated. A chemoselectivity in favor of carbonyl ylide was observed.     

Synthesis and characterization of substituted salicylate zirconium compounds and their catalytic activity over ε-caprolactone

In this study, zirconium salicylate compounds (1–6) were prepared by reaction of zirconium(IV) propoxide with 5-chlorosalicylic acid, 4-hydroxysalicylic acid, and 5-nitrosalicylic acid in 1-propanol, respectively. All these compounds (1–6) were characterized by ¹H, ¹³C NMR, FTIR, mass spectroscopy, elemental, and thermogravimetric analyses. These compounds were tested as catalysts in polymerization of ε-caprolactone and were effective. Polycaprolactone was characterized by ¹H, ¹³C NMR, and gel permeation chromatography. The number of salicylate ligands (bonded to zirconium atom) effects and substituents (on salicylate ligands) effects on the polymerization reactions were investigated first time by this study.     

Reactions of α,β‐Enones with Diazo Compounds. Part 4

In this study, (E)‐ and (Z)‐enones carrying only a phenyl substituent at their C(β) atom were treaced with dimethyl diazomalonate in the presence of (acetylacetonato)copper(II). According to the configuration of the starting enones, the products were dioxole or dihydrofuran derivatives, significant heterocycles in natural products.     

Determination of levetiracetam in human plasma by online heart‐cutting liquid chromatography: Application to therapeutic drug monitoring

Levetiracetam is an antiepileptic drug for the treatment of psychiatric patients. In this study, a selective, straightforward, and rapid online heart‐cutting liquid chromatography method was developed for the therapeutic drug monitoring of levetiracetam. This method allows for the determination of levetiracetam in human plasma without complex sample preparation. The mobile phases consisted of 30 mM aq. orthophosphoric acid solution/methanol (70:30) at a flow rate of 1 mL/min for the first system and 10 mM aq. orthophosphoric acid solution/methanol (55:45) at a flow rate of 1 mL/min for the second system. The first separation was carried out on a GL Sciences Intersil ODS‐3 column (4.6 mm × 150 mm, 3 µm) and the second separation was carried out on a Restek Ultra PFPP column (4.6 mm × 150 mm, 5 µm). The detection was carried out at 205 nm for both systems. The method was validated for selectivity and linearity, which were in the 6–60 µg/mL range. Intra‐ and interassay accuracies were <112.6%, and the intra‐ and interassay precisions were <6.4% for all quality control samples. The lower limit of quantitation was 6 µg/mL. The developed method was successfully applied for therapeutic drug monitoring of plasma samples from patients.     

Acrylamide concentrations in grilled foodstuffs of Turkish kitchen by high performance liquid chromatography-mass spectrometry

For over ten years, there has been a considerable interest in determination of acrylamide in foodstuffs. It was known that both protein-rich and carbohydrates-rich foods cooked at high-temperatures can cause acrylamide formation. However, carbohydrates-rich foods such as potato chips and biscuit samples have been the common studied foods compared with protein-rich foods such as meat samples.In this study, determination of acrylamide in these two group foods was examined using HPLC-MS. For this purpose, firstly, the parameters that are thought to affect the response in the HPLC-MS analysis were optimized. The optimized conditions were found to be 0.3 ml min^{− 1} for flow rate of mobile phase, 40 µl for injection volume, 5 °C for column temperature and 70 V for fragmentor potential. The optimized method was applied for the determination of acrylamide levels in Turkish foodstuffs including grilled meat and chicken samples, potato chips, coffee and biscuit. The obtained concentrations for all studied foods were in the range of 20–250 µg kg^{− 1}. The results showed that acrylamide concentrations highly varied depending on the kind of food samples.     

Synthesis and photopolymerizations of first monomers with phosphonate and bisphosphonate or phosphonic and bisphosphonic acid functionalities for potential dental applications

The first monomers containing both phosphonate and bisphosphonate (M1) or phosphonic and bisphosphonic acid (M2) functionalities are synthesized, aiming to improve binding abilities of self-etching adhesive systems and composites: An amine having both phosphonate and bisphosphonate functionalities is prepared via Michael addition reaction between diethyl (6-aminohexyl)phosphonate and tetraethyl vinylidene bisphosphonate, its reaction with 2-isocyanatoethyl methacrylate gives M1 which is converted to M2 by selective dealkylation of the phosphonate/bisphosphonate ester groups. Their copolymerization with commercial dental monomers (bisphenol A glycidyl methacrylate, triethylene glycol dimethacrylate, and 2-hydroxyethyl methacrylate) investigated by photo-differential scanning calorimetry shows adequate photopolymerization rate and conversion. X-ray diffraction, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses of M2-treated hydroxyapatite particles show formation of stable M2-calcium salts. These monomers are assessed to be not toxic according to MTT standards by in vitro cytotoxicity studies with NIH 3T3, U2OS, and Saos-2 cells. All these properties make these monomers potential candidates as biocompatible components for dental adhesives and composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2739–2751     

Micellar effect on the sensitivity of spectrophotometric Mo(VI) determination based on the formation of gallic acid complex providing evidence for the polyoxoanion structure of molybdate ions

In this study effects of anionic (sodium dodecyl sulfate, SDS), cationic (cetyltrimethylammonium bromide, CTAB) and nonionic (Triton X-100, TX100) micelles on the sensitivity of spectrophotometric molybdenum(VI) (Mo) determination based on the formation of a binary complex with gallic acid (GA) were investigated.

Micellar CTAB was found to enhance the formation of Mo–GA complex. SDS micelles exerted an inhibitory effect while TX100 micelles had no effect on the complex formation. By the optimization of experimental conditions, the determination limit of the method suggested in the literature was lowered from 5.2 × 10⁻⁵ to 4.6 × 10⁻⁶ and to 5.7 × 10⁻⁷ M, in the absence and presence of CTAB, respectively.

The mechanism of the effect of CTAB was investigated by spectrophotometric titrations and it was concluded that CTAB did not form a ternary complex with Mo and GA. The stoichiometry of the complex, deduced from the results of spectrophotometric titrations, provided evidence for the formation of para-Mo₇O₄⁶⁻ polyanions at pH 4.5, indicating to the formation of a charge transfer complex between these ions and GA in micellar medium.