On-line determination of mercury in river water at the German monitoring station Schnackenburg/Elbe

A monitor is described which provides the on-line determination of mercury in river water at concentrations from 20 to 1000 ng/L. The measurement includes an on-line digestion with Br^–/BrO₃ ^– and UV-radiation. Each determination is controlled by an on-line addition of 50 and 100 ng/L mercury carried out by pre-dilution of a 500 and 1000 ng/L stock solution using sequential injection analysis (SIA). One cycle of analysis takes 20 min and results in nine signals. A five days stand-alone operation has been performed successfully. Details are also published at web page: “http/www.rzbd.fh-hamburg.de/¶～prmercol”     

Morphogenetic control of calcite crystal growth in sulfonic acid based hydrogels

In this paper the mineralization of CaCO(3) in various hydrogel matrices is presented. Sulfonic acid based hydrogels were prepared by introduction of sulfonate-containing monomers into a polyacrylamide network. The sulfonate content of polyacrylamide-co-vinylsulfonate and polyacrylamide-co-allylsulfonate decreases during elution of the copolymers in demineralized water, indicating insufficient linking of the sulfonate-bearing monomers within the hydrogel. In contrast to this, acrylamidomethylpropanesulfonate (AMPS) effectively copolymerizes with acrylamide (AAm) monomers. To study the influence of spatial arrangement of ionic functional groups within hydrogel networks on the mineralization of CaCO(3), AMPS copolymers with different degrees of AMPS cross-linking were synthesized. For the mineralization experiments the copolymers were placed into a double-diffusion arrangement. Calcite as the thermodynamically stable modification of CaCO(3) was obtained with a particular morphology. The pseudocubic habitus resembles aggregates obtained by mineralization in pure polyacrylamide. However, closer examination of the aggregates by scanning electron microscopy (SEM) shows that the crystal growth in the AMPS copolymers is different from that observed in polyacrylamide. Whereas the morphology of the calcite aggregates could be fine-tuned by using copolymers with different sulfonate content, the spatial distribution of the ionic functional groups alters the course of crystallization. Calcium ions are locally accumulated due to the heterogeneous distribution of functional sulfonate groups within the copolymer network. Thereby the nucleation of calcite is triggered, resulting in enhanced mineralization.     

The structure of magnesium alanate

Mg(AlH(4))(2) was produced as a nanocrystalline powder by metathesis of NaAlH(4) and MgCl(2). Starting with a structure estimation which was developed from an evaluation of FTIR data and comparison of structural properties of two solvent adducts, quantum chemical calculations were performed on the density functional theory (DFT) level. The calculated atomic positions were used to simulate an X-ray powder diffraction pattern, based on a trigonal unit cell. The simulated pattern was congruent to experimental data. Thus, magnesium alanate exhibits a CdI(2) layer structure, the layers being formed by Mg atoms occupying the Cd sites and AlH(4) tedrahedra occupying the sites of the iodine atoms in CdI(2).     

Synthese von Sulfolenobilinen und deren Cyclisierung zu Chlorinatozink‐Fulleren‐Dyaden

Synthesis of Sulfolenobilins and Their Cyclization Directed to Chlorinatozinc‐Fullerene Dyads A novel chlorinatozinc‐fullerene dyad 18 was synthesized to model the photosynthetic reaction center. The synthetic key step for the formation of the dyad 18 is an unusual one‐pot reaction of the (sulfolenobilinato)nickel rac‐ 16a , b with concomitant generation of the chlorin macrocycle and linkage to the [5,6]fullerene‐C₆₀‐I_h. This one‐pot reaction is a complex cascade of single reaction steps with a total yield of 32% and an average yield of 83% for the individual steps. The chlorinatozinc‐fullerene dyad is so far one of three examples that contain chlorin moieties, the chromophores in naturally occurring photosynthetic systems.     

Enediynes in 11-membered rings. Synthesis, structure, and reactivity of highly strained but unusually stable macrocycles.

The synthesis of two new aromatic cyclic enediynes 1a and 1b using a double Wittig condensation, followed by bromination and di-dehydrobromination, is reported. The structures were determined using X-ray crystallography. The observed C(1)-C(6) distances of the enediyne moiety in the oxygen- and sulfur-containing eleven-membered rings are quite short with 3.44 and 3.50 A, respectively, indicating the highly strained nature of these compounds. Isodesmic calculations at the B3LYP/6-31G level of theory indicate a strain energy of 8.2 and 5.8 kcal/mol, respectively. Despite the highly strained ring system, the compounds were found to be stable under thermal, photochemical, and electron-transfer conditions. Using BLYP/6-311+G/BLYP/6-31G calculations, the origin of this unusual stability was traced to the high energy of the 1,4 benzyne diradicals formed via Bergman cyclization. For the radical cation, both the C(1)-C(6) and the C(1)-C(5) cyclization mode previously reported for acyclic analogues of 1 were found to be energetically prohibitive.     

Synthese,Kristallstruktur und spektroskopische Charakterisierung von [Au12(PPh)2(P2Ph2)2(dppm)4Cl2]Cl2

Synthesis, Crystal Structure and Spectroscopic Characterization of [Au₁₂(PPh)₂(P₂Ph₂)₂(dppm)₄Cl₂]Cl₂ The reaction of [(AuCl)₂dppm] (dppm = Ph₂PCH₂PPh₂) with P(Ph)(SiMe₃)₂ in CHCl₃ results in the formation of [Au₁₂(PPh)₂(P₂Ph₂)₂(dppm)₄Cl₂]Cl₂ ( 1 ), the crystal structure of which was determined by single crystal X‐ray analysis (space group P2₁/c, a = 1425.3(3) pm, b = 2803.7(6) pm, c = 2255.0(5) pm, β = 95.00(3)°, V = 8977(3)·10⁶ pm³, Z = 2). The dication in 1 consists of two Au₆P₃ units built by highly distorted Au₃P and Au₂P₂ heterotetrahedra, connected via four bidentate phosphine ligands. Additionally, the compound was characterized by IR‐, UV‐ and NMR spectroscopy. The ³¹P{¹H} NMR spectrum is discussed in detail.     

Trovacenchemie. 13 [1] Weg und Irrweg zu Di([5]trovacenyl)keton

Trovacene Chemistry. 13 [1] On Being Lead and Mislead in the Synthesis of Di([5]trovacenyl)ketone Di([5]trovacenyl)ketone ( 3¨ ) has been prepared from lithio‐[5]trovacene and dimethylcarbamoyl chloride and studied by X‐ray diffraction, cyclic voltammetry, magnetic susceptometry and EPR spectroscopy. Slight variation of the synthetic protocol affords an unusual trinuclear complex 5 ? that is also fully characterized. Spin‐spin exchange interaction is smaller in 3¨ than in 1,1‐di([5]trovacenylethene ( 2¨ ), which differs from 3¨ by a replacement of O for CH₂. The novel trinuclear complex 5 ? , however, displays exchange coupling very similar to that observed in 1‐methoxy‐2,5,6‐tri([5]trovacenyl)benzene ( 7 ? ). In both cases, an unsymmetrical triangular arrangement of S = 1/2 centers is encountered. These findings are discussed in terms of the nature of the respective spacers.     

Zur Elektronenstruktur metallorganischer Komplexe der f‐Elemente. 64 Äußert sich die zwitterionische Natur des Triphenylphosphanoxid‐Liganden auch in seinen spektrochemischen Eigenschaften?

Electronic Structures of Organometallic Compounds of f Elements. 64 Does the Zwitterionic Nature of the Triphenylphosphine Oxide Ligand Manifest itself in its Spectrochemical Properties? The triphenylphosphine oxide mono adducts of the moiety tris(η⁵‐cyclopentadienyl)lanthanide(III) (Ln(Cp)₃; Ln = Pr ( 1 ), La ( 2 )) were synthesized and structurally characterized. The Ln–O distances of these compounds are noticeably shorter than those of the corresponding THF adducts. A crystal field (CF) analysis of the optical spectra of 1 leads to a low absolute value of the quadratic CF parameter which is comparable with those of [Pr(Cp)₃(L)]^? adducts with anionic bases but not with [Pr(Cp)₃(MeTHF)]. Reasons for the latter finding are presented.     

1,2,4,5-Tetrakis(tetramethylguanidino)-3,6-diethynyl-benzenes: Fluorescent Probes,Redox-Active Ligands and Strong Organic Electron Donors

In this work, the change of reactivity induced by the introduction of two para-ethynyl substituents (CCSi(iPr)₃ or CCH) to the organic electron-donor 1,2,4,5-tetrakis(tetramethylguanidino)-benzene is evaluated. The redox-properties and redox-state dependent fluorescence are evaluated, and dinuclear Cu^I and Cu^II complexes synthesized. The Lewis-acidic B(C₆F₅)₃ substitutes the proton of the ethynyl −CCH groups to give new anionic −CCB(C₆F₅)₃⁻ substituents, leading eventually to a novel dianionic strong electron donor in its diprotonated form. Its two-electron oxidation with dioxygen in the presence of a copper catalyst yields the first redox-active guanidine that is neutral (instead of cationic) in its oxidized form.     

Control of droplet size and spacing in micrometer-sized polymeric dewetting patterns

When a polymer solution is cast on a flat substrate and the solvent is allowed to evaporate, dewetting might take place. Instead of a continuous film, the polymer forms micrometer-sized droplets. By controlling the solvent casting process with the help of a roller apparatus, the size and spacing of the polymer droplets can be adjusted. We investigated the effect of polymer concentration and roller speed on the pattern dimensions and found that higher concentrations lead to larger polymer droplets (from 1 to 11 microm), whereas faster roller speeds lead to a wider interdroplet spacing (from 4 to 130 microm).