Effect of bombardment with helium ions on the molecular-topological structure and elemental composition of the surface of Kynar polyvinylidene fluoride resin

A polyvinylidene fluoride film has been bombarded with accelerated (1–5 MeV) helium ions at a fluence of 10¹⁵ ion/cm². Unlike the completely amorphous structure of the unirradiated polymer, the weight fraction of the crystalline modification in the irradiated polymer is 0.86–0.90, which is indicative of the efficient conversion of the amorphous structures of the polymer pseudo-network into the crystalline ones. Irradiation with 1-MeV ions leads to the greatest changes in the fraction of the crystalline modification and the glass-transition and flow temperatures of the polymer. The detachment of fluorine and the surface carbonization of the irradiated polymer occur under the ion beam.     

Effect of small additions of carbon nanotubes on the electrical conductivity of polyurethane elastomer

The effect of small (0.002–0.018 wt %) additions of single-walled carbon nanotubes on the dielectric properties and electrical conductivity of crosslinked polyurethane elastomer is studied in the temperature range of 133–453 K and the 10^?3 to 10⁵ Hz range of electric field frequencies. It is shown that the dependence of direct current conductivity σ _dc on temperature deviates significantly from the Arrhenius dependence and is described by the Vogel-Fulcher-Tamman equation σ _dc = σ _dc0exp{?DT ₀/(T ? T ₀)}, where T ₀ is the Vogel temperature and D is the strength parameter. A correlation is found between the nonmonotonic dependences of the glass transition temperature (T _g), D parameter, and σ _dc and the concentration of nanotubes with earlier results for their effects on the physicomechanical characteristics (strength and Young’s modulus) of these systems.     

Utilization of Slovak bentonites in deposition of high-level radioactive waste and spent nuclear fuel

The basic strategic aims in the field of managing high-level radioactive waste and liquidation of nuclear power plants are all contained in the Energy policy of the Slovak Republic. Its aim is to resolve the concept of the backside of the nuclear energetics fuel cycle??long-term deposition of high-level radioactive waste and spent nuclear fuel (SNF). The most important form of high-level radioactive waste and SNF long-term deposition is their deposition in deep geological formations created by natural as well as engineering barriers used to isolate the long-lived radionuclides from the biosphere. The basic components of these barriers are clays, of which bentonite is generally referred to as the most suitable clay material. There are a few significant bentonite deposits in the Slovak Republic: Jel?ový potok, Kopernica, Lastovce, Lieskovec, Dolná Ves. The review article summarizes the information on geotechnical properties of Slovak bentonites published up-to-date, which is inevitable to know for the intention of their use. It highlights the advantages and shows drawbacks of five Slovak deposits. It suggests further research direction, to draw a thorough hydraulical, microbial and radiation profile of Slovak bentonites.     

The UHPLC-DAD fingerprinting method for analysis of extracellular metabolites of fungi of the genus <Emphasis Type="Italic">Geosmithia</Emphasis> (Acomycota: Hypocreales)

A new simple ultra-high-performance liquid chromatography method with diode array detection (UHPLC-DAD) was developed for chemical fingerprinting analysis of extracellular metabolites in fermentation broth of Geosmithia spp. The SPE method employing Oasis MCX strong cation-exchange mixed-mode polymeric sorbent was chosen for extraction of the metabolites. The analyses were performed on an Acquity UPLC BEH C18 column (100 × 2.1 mm i.d.; particle size, 1.7 μm; Waters) using a gradient elution program with an aqueous solution of trifluoroacetic acid and acetonitrile as the mobile phase. The applicability of the method was proved by analysis of 38 strains produced by different species and isolated from different sources (hosts). The results revealed the correlation of obtained UHPLC-DAD fingerprints with taxonomical identity.     

Retention behaviour of imidazolium ionic liquid cations on 1.7 μm ethylene bridged hybrid silica column using acetonitrile-rich and water-rich mobile phases

The potential of 1.7 μm ethylene bridged hybrid silica phase was investigated for the separation of twelve imidazolium-based ionic liquid cations. U-shaped retention profile was observed for all solutes with an increase in retention at both low and high acetonitrile content. Chromatographic behaviour of imidazolium cations in both hydrophilic interaction chromatography (HILIC) and per aqueous liquid chromatography (PALC) modes was studied by varying key parameters such as buffer concentration and pH, acid additive, organic modifier and column temperature. Experimental data provided some evidences that under PALC conditions cationic solutes are retained predominantly by mixed hydrophobic/ion-exchange interactions. In the HILIC mode, both partitioning and ion-exchange interactions are responsible for the retention of solutes. Compared to PALC, HILIC provided significantly higher efficiencies with less or even no peak tailing, better separation selectivity and greater resistance to overload. In PALC mode gradient elution was required to achieve adequate retentivity of all solutes but selectivity was not sufficient to distinguish between solutes with very similar hydrophobicity. In contrast, under HILIC conditions twelve solutes were almost completely resolved in less than 4 min by using isocratic elution. Summarizing, it could be concluded that ethylene bridged hybrid silica column providing a dual retention mechanism offers the possibility of selecting between the two retention modes with opposite separation selectivity, just by changing the composition of the mobile phase.     

Interaction of phenol and dopamine with commercial MWCNTs

We report the adsorption of phenol and dopamine probe molecules, from aqueous solution with NaCl, on commercial multiwall carbon nanotubes (MWCNT) and on their carboxylated derivative. The nanotubes were fully characterized by high resolution transmission electron microscopy (HRTEM), small angle X-ray scattering (SAXS), potentiometric titration, electrophoretic mobility, and nitrogen adsorption (77K) measurements. The experimental pollutant isotherms, evaluated using the Langmuir model, showed that only 8-12% and 21-32% of the BET surface area was available for phenol and dopamine, respectively, which is far below the performance of activated carbons. Influence of the pH was more pronounced for the oxidized MWCNT, particularly with dopamine. The strongest interaction and the highest adsorption capacity occurred at pH 3 with both model pollutants on both types of nanotubes. Although the surface area available for adsorption is far lower in MWCNTs than in activated carbons, it is nonetheless substantial. In particular, delayed release of toxic molecules that are either adsorbed on the surface or trapped in the inner bore of such systems could constitute an environmental hazard. The need for further adsorption studies with regard to their environmental aspects is therefore pressing, particularly for MWCNTs in their functionalized state.     

A simple and green analytical method for determination of glyphosate in commercial formulations and water by diffuse reflectance spectroscopy

This article describes a simple, inexpensive, and environmentally friendly method for the monitoring of glyphosate using diffuse reflectance spectroscopy. The proposed method is based on reflectance measurements of the colored compound produced from the spot test reaction between glyphosate and p-dimethylaminocinnamaldehyde (p-DAC) in acid medium, using a filter paper as solid support. Experimental designs were used to optimize the analytical conditions. All reflectance measurements were carried out at 495 nm. Under optimal conditions, the glyphosate calibration graphs obtained by plotting the optical density of the reflectance signal (AR) against the concentration were linear in the range 50-500 μg mL(-1), with a correlation coefficient of 0.9987. The limit of detection (LOD) for glyphosate was 7.28 μg mL(-1). The technique was successfully applied to the direct determination of glyphosate in commercial formulations, as well as in water samples (river water, pure water and mineral drinking water) after a previous clean-up or pre-concentration step. Recoveries were in the ranges 93.2-102.6% and 91.3-102.9% for the commercial formulations and water samples, respectively.     

Casbane diterpene as a promising natural antimicrobial agent against biofilm-associated infections

Croton nepetaefolius is a native plant from northeastern Brazil that belongs to the Euphorbiaceae family. The biological action of this plant has been extensively explored, being the secondary metabolites responsible for its properties alkaloids, diterpenes, and triterpenes. This study aimed to evaluate the ability of casbane diterpene (CD), isolated from the ethanolic extract of C. nepetaefolius, to inhibit microbial growth and biofilm formation of several clinical relevant species (bacteria and yeasts). It was found that CD possessed biocidal and biostatic activity against the majority of the species screened, with minimal active concentrations ranging between 125 and 500 μg/mL. In addition, it was observed that biofilm formation was inhibited even when the planktonic growth was not significantly affected. In conclusion, CD showed potential to be a natural tool for the treatment of diseases caused by different infectious microorganisms.     

Groups with small Dehn functions and bipartite chord diagrams

We introduce a new invariant of bipartite chord diagrams and use it to construct the first examples of groups with Dehn function n²log n. Some of these groups have undecidable conjugacy problem. Our groups are multiple HNN extensions of free groups. We show that n²log n is the smallest Dehn function of a multiple HNN extension of a free group with undecidable conjugacy problem. Both authors were supported in part by the NSF grants DMS 0245600 and DMS 0455881. In addition, the research of the first author was supported in part by the Russian Fund for Basic Research 05-01-00895, the research of the second author was supported in part by the NSF grant DMS 9978802 and the US-Israeli BSF grant 1999298. Received: February 2005; Revision: September 2005; Accepted: September 2005     

Magnetic anisotropy of a system of nanocrystalline BaO·6Fe2O3 particles

The anisotropy of a system of barium ferrite particles with an average diameter of 60 nm has been studied. The effective anisotropy constant has been determined in the temperature range from 4.2 K to T _c by the law governing approach to saturation magnetization. The observed deviation from the magnetocrystalline anisotropy constant is explained as due to a negative contribution of the “surface” anisotropy constant. An estimate is made of this contribution as a function of particle size. Fiz. Tverd. Tela (St. Petersburg) 40, 1894–1897 (October 1998)