Oxidation of 7,8‐diaminotheophylline with lead tetraacetate and reaction of the oxidation product, 6‐cyanoimino‐5‐diazo‐1,3‐dimethylpyrimidine‐2,4‐dione with alcohols or amines

Oxidation of 7,8‐diaminotheophylline (1) with lead tetraacetate in refluxing toluene gave a mixture of 3‐amino‐5,7‐dimethylpyrimido[4,5‐e][1,2,4]triazine‐6,8‐dione ( 2 ) and 6‐cyanoimino‐5‐diazo‐1,3‐dimethylpyrimidine‐2,4‐dione ( 4 ). The latter was transformed to 2 by the reaction with 1‐propanethiol in quantitative yield. The reaction of 4 with methanol, ethanol and 1‐propanol in the presence of rhodium ( II ) acetate gave 5‐alkoxy‐6‐(2‐alkyl‐3‐isoureido)‐1,3‐dimethylpyrimidine‐2,4‐diones ( 7a‐c ). A similar reaction of 4 with alkylamines such as n‐propylamine, n‐butylamine, isobutylamine and n‐hexylamine gave a mixture of 7‐alkyl‐8‐aminotheophyllines ( 8a‐d ) and (5‐alkylamino‐1,3‐dimethyl‐2,4‐dioxopyrimidin‐6‐yl)cyanamides ( 9a‐d ).     

Neue Polykationen mit Nucleins?urebasen. i. Mitt. Synthese und Wechselwirkung in L?sung mit Polynucleotiden und mit verwandten Verbindungen

Ohne Zusammenfassung     

Microwave EPR spectroscopy of cobalt-doped germanium cuprate

Resonance magnetoabsorption spectra of CuGeO₃ single crystals containing 2% Co impurity have been studied in the frequency range 60–360 GHz in magnetic fields of up to 16 T and in the temperature interval 2–60 K with the magnetic field B aligned parallel to the a crystallographic axis. In addition to the Cu²⁺ chain resonance, a new absorption line (unobserved previously in doped CuGeO₃ and deriving apparently from the Co²⁺ ions) was detected in EPR spectra. Quantitative analysis of the spectra suggests that the spin-Peierls transition occurs in about 10% Cu²⁺ chains, while the spin-Peierls state in the remaining 90% chains is completely destroyed by cobalt doping. The results obtained reveal considerable deviations from the universally accepted scenario of CuGeO₃ doping and are discussed within alternative theoretical models, namely, the quantum critical behavior (based on the EPR theory for quasi-one-dimensional systems) and a three-dimensional antiferromagnet with the Néel temperature lowered by disorder.     

Submillimeter-wave ESR measurements of Ca1−xCuO2 (x = 0.164) with edge-sharing CuO2 chains

Quasi-one-dimensional (1-D) cupric oxide Ca_1?xCuO₂ (x = 0.164) is the system with 25–40% hole-doped edge-sharing CuO₂ chains. However, the holes are almost localized in Ca_1?xCuO₂ and its magnetic susceptibility with a peak at 30 K was explained by the model considering both 1-D antiferromagnetic chains and spin dimers (Z. Hiroi, M. Okumura, Y. Nabeshima, T. Yamada, M. Takano: J. Phys. Soc. Jpn.69, 1824, 2000). To clarify the magnetic nature of Ca_1?xCuO₂, we performed submillimeter-wave electron spin resonance (ESR) measurements on a powder sample of Ca_0.83?6CuO₂. The resonance above 12 K showed typical powder ESR of Cu²⁺ and theg-values were determined to be g∥= 2.33 and g_⊥ = 2.06 from the analysis. The resonance below 12 K changed completely from ESR. The frequency-field relation of ESR at 1.8 K clearly showed the easy-axis type antiferromagnetic resonance.     

Chemical compositional separation of styrene-methyl methacrylate copolymers using high-performance liquid chromatography with liquefied carbon dioxide as eluent

Chromatographic separation of styrene-methyl methacrylate (MMA) copolymers depending on the chemical composition was studied using liquefied carbon dioxide as an adsorption promoting solvent, and tetrahydrofuran, chloroform containing ethanol as a desorption promoting solvent in the mobile phase and the column packed non-bonded silica gel by a solvent gradient method. With the increase of MMA content, the elution was retarded indicating that the typical normal-phase type of adsorption occurred. The effects of type of desorption solvents, molecular mass of sample, and column temperature on the elution were investigated.     

Stress-concentration factors for semielliptical notches in beams under pure bending

Elliptical notches in rectangular beams under pure bending are examined photoelastically. Stress-concentration factors due to a single elliptical notch are obtained for wide ranges of 2a/h andd/h, where 2a, d, andh are the width of notch, depth of notch, and depth of beam, respectively. In particular, the geometries of the optimum elliptical notches producing the least stress concentrations are obtained. Almost the whole elliptical boundary of these notches are stressed to the same peak, which indicates that these notches will probably produce the least stress concentrations among all notches, elliptical or nonelliptical. The graphs herein will enable the designers to find the stress-concentration factors of elliptical notches and to pick out the geometry of the optimum notch which will give the least stress concentration for any given values of 2a/h andd/h. Stresses and the stress-concentration factors at the bottom of the beam opposite the notch are also obtained. These stresses, though smaller in magnitude, are of an opposite sign to the peak stress at the notch. For brittle materials, a smaller tensile stress may be more critical than a large compressive stress; therefore, these stress-concentration factors are also given.     

Thermodynamics of Solvation of 18-Crown-6 and Its Alkali-Metal Complexes in Various Solvents

Heats of solution of 1,4,7,10,13,16-hexaoxacyclooctadecane (18-crown-6) in acetonitrile, 1,2-dichloroethane, N,N-dimethylformamide, dimethyl sulfoxide, nitromethane, propylene carbonate, pyridine and water were measured at 25 °C and the enthalpies of the transfer of 18-crown-6 from waterto the aprotic solvents were derived. The thermodynamic quantities, G₁°, H₁° and T S₁°, for the formation of the[M(18-crown-6)]⁺ (M⁺ = Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) complexeswere determined by titration calorimetry in dimethyl sulfoxide containing0.1 mol dm^-3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25 °C. These thermodynamic quantities suggest that the complexationof 18-crown-6 with the alkali-metal ions mainly reflects the different solvationof 18-crown-6 and also the different degree of solvent structure.     

Rheological properties of deionized Chinese ink

Rheological properties for Chinese ink in exhaustively deionized aqueous media were carefully examined. In the steady shear measurement, the shear viscosities of the ink could be well explained by considering the “effective” volume fraction of the particles in the ink including the electrical double layers and by using Einstein's equation for dilute suspension viscosity, when the particle volume fraction was substantially low. In the case that the volume fraction was higher, the shear viscosities showed extremely higher than those from Einstein's prediction, though the ink remained a Newtonian liquid. In the stress-strain measurement, the shear moduli were observed at strain smaller than 0.2. The “weak” aggregation among the particles in the ink under no shear or low shear rates was supported. It should be noted that the glue in the suspension plays an important role for the good liquidity of the ink and for the “weak” bridges among the particles resulting its good dispersion stability.     

Preparation of multihollow polymer particles by seeded emulsion polymerization using seed particles with incorporated nonionic emulsifier

Emulsion polymerizations of styrene using poly(oxyethylene) nonylphenyl ether nonionic emulsifier were carried out at different emulsifier and initiator (potassium persulfate, KPS) concentrations to prepare polystyrene (PS) seed particles with incorporated nonionic emulsifier. Seeded emulsion polymerizations of styrene using the PS seed particles with different amounts of incorporated emulsifier were carried out to develop a novel method for the preparation of multihollow particles. When seed particles with a small amount of incorporated emulsifier were used, non-hollow spherical particles were prepared. However, multihollow particles were obtained in the case of seed particles with a large amount of incorporated emulsifier. Moreover, the higher the initiator concentration in the preparation of seed particles, the more effectively were hollow particles prepared. On the basis of the above results, a mechanism for the formation of multihollow structure was suggested.