Exciton Binding Energies in Conjugated Polyelectrolyte Films

Molecular design: The electronic structure of conjugated polyelectrolytes as a function of ionization potential (IP) and electron affinity (EA) is determined using X‐ray absorption and emission spectroscopy (see figure). Different functional groups give rise to dissimilar transport gaps and exciton binding energies.

     

Tuning the Composition of Guest Molecules in Clathrate Hydrates: NMR Identification and Its Significance to Gas Storage

Gas hydrates represent an attractive way of storing large quantities of gas such as methane and carbon dioxide, although to date there has been little effort to optimize the storage capacity and to understand the trade‐offs between storage conditions and storage capacity. In this work, we present estimates for gas storage based on the ideal structures, and show how these must be modified given the little data available on hydrate composition. We then examine the hypothesis based on solid‐solution theory for clathrate hydrates as to how storage capacity may be improved for structure II hydrates, and test the hypothesis for a structure II hydrate of THF and methane, paying special attention to the synthetic approach used. Phase equilibrium data are used to map the region of stability of the double hydrate in P–T space as a function of the concentration of THF. In situ high‐pressure NMR experiments were used to measure the kinetics of reaction between frozen THF solutions and methane gas, and ¹³C MAS NMR experiments were used to measure the distribution of the guests over the cage sites. As known from previous work, at high concentrations of THF, methane only occupies the small cages in structure II hydrate, and in accordance with the hypothesis posed, we confirm that methane can be introduced into the large cage of structure II hydrate by lowering the concentration of THF to below 1.0 mol %. We note that in some preparations the cage occupancies appear to fluctuate with time and are not necessarily homogeneous over the sample. Although the tuning mechanism is generally valid, the composition and homogeneity of the product vary with the details of the synthetic procedure. The best results, those obtained from the gas–liquid reaction, are in good agreement with thermodynamic predictions; those obtained for the gas–solid reaction do not agree nearly as well.     

Surface precipitation of highly porous hydrotalcite-like film on Al from a zinc aqueous solution

A hydrotalcite-like film has been successfully deposited on an Al-bearing glass substrate based on an interface reaction between an Al layer and a zinc aqueous solution. The film selectively grew on the Al surface but not on the glass surface. The film on Al was composed of layered nanosheets of a hydrotalcite-like compound containing Al and Zn. Comparably, deposits on the plastic surface and precipitates in solution were wurzite-type ZnO with various morphologies depending upon the preparation conditions. At low supersaturation degrees, single crystals and superstructures of Zn-Al hydrotalcite were also obtained. This porous hydrotalcite film has a potential application as catalyst supports, environmental materials, or matrixes for hydrotalcite-based nanocomposite films. Using Al as a reaction interface makes it easy to coat porous hydrotalcites on a series of matrix materials varying in shapes and properties, which is important for achieving practical applications. In addition, the method developed should be widely applicable to other systems for the preparation of porous or oriented hydrotalcite-like thin films by an appropriate combination of divalent/trivalent solution-substrate systems.     

Forces between mica surfaces, prepared in different ways, across aqueous and nonaqueous liquids confined to molecularly thin films

We have measured normal and lateral interactions across a range of different liquids between mica surfaces using a surface force balance (SFB). The mica surfaces were prepared either by melt cutting using Pt wire and standard procedures in our laboratories or by tearing sheets (that had not been exposed to Pt) off from a freshly cleaved sheet of mica. AFM micrographs revealed the substantial absence of Pt nanoparticles on the melt cut and torn-off mica surfaces. Normal-force versus surface-separation (D) profiles and shear force versus D measurements for purified water (no added salt), for concentrated aqueous NaCl solutions, and for cyclohexane revealed that in all cases the behavior of the highly confined liquids between melt-cut and between torn-off mica sheets was identical within experimental scatter. These results demonstrate directly that interactions measured between melt-cut mica surfaces as routinely prepared using established procedures in our laboratories and in other laboratories are free of the effect of any Pt contamination.     

Tandem Diels-Alder cycloadditions of 2-pyrone-5-acrylates for the efficient synthesis of novel tetracyclolactones

Readily prepared from the regioselective Pd-catalyzed coupling reactions of 3,5-dibromo-2-pyrone, 3-bromo-2-pyrone-5-carboxylates undergo tandem uninterrupted sequential Diels-Alder cycloaddition reactions with allyl vinyl ethers in a highly regio- and stereoselective fashion to provide a series of novel tetracyclolactones in good yields.     

Light stamping lithography: microcontact printing without inks

We report a new patterning method, called light-stamping lithography (LSL), that uses UV-induced adhesion of poly(dimethylsiloxane) (PDMS). LSL is based on the direct transfer of the contact surface of the PDMS stamp to a substrate via a UV (254 nm)-induced surface bonding between the stamp and the substrate. This procedure can be adopted in automated printing machines that generate patterns with a wide range of feature sizes on diverse substrates. To demonstrate its usefulness, the LSL method was applied to prepare several PDMS patterns on a variety of substrates. The PDMS patterns were then used as templates for selective deposition of TiO2 thin film using atomic layer deposition as well as resists for selective wet etching.     

A rapid and sensitive liquid chromatography/positive ion tandem mass spectrometry method for the determination of cimetropium in human plasma by liquid-liquid extraction

We have developed and validated a simple detection system with high-performance liquid chromatography (HPLC) with positive ion electrospray ionization tandem mass spectrometry (ESI-MS/MS) for determining cimetropium levels in human plasma using scopolamine butyl bromide as an internal standard (I.S.). The acquisition was performed in the multiple reaction monitoring (MRM) mode, by monitoring the transitions: m/z 357.9 > 103.1 for cimetropium and m/z 359.9 > 103.1 for butyl-scopolamine. The method involves a simple single-step liquid-liquid extraction with dichloromethane. The analyte was chromatographed on an YMC C18 reversed-phase chromatographic column by isocratic elution with 10 mM ammonium formate buffer-methanol (19:81, v/v; adjusted to pH 4.0 with formic acid). The results were linear over the studied range (0.2-100 ng ml(-1)), with r2 = 1.0000, and the total analysis time for each run was 2 min. Intra- and interassay precisions were 0.70-8.54% and 1.08-4.85%, respectively, and intra- and interassay accuracies were 97.56-108.23% and 97.48-103.91%, respectively. The lower limit of quantification (LLOQ) was 0.2 ng ml(-1). At this concentration, mean intra- and interassay precisions were 8.54% and 4.85%, respectively, and mean intra- and interassay accuracies were 97.56% and 98.91%, respectively. The mean recovery ranged from 62.71 +/- 4.06 to 64.23 +/- 2.32%. Cimetropium was found to be stable in plasma samples under typical storage and processing conditions. The devised assay was successfully applied to a pharmacokinetic study of cimetropium bromide administered as a single oral dose (150 mg) to healthy volunteers.     

Influence of electric field intensity, ionic strength, and migration distance on the mobility and diffusion in DNA surface electrophoresis

In order to increase the separation rate of surface electrophoresis while preserving the resolution for large DNA chains, e.g., genomic DNA, the mobility and diffusion of Lambda DNA chains adsorbed on flat silicon substrate under an applied electric field, as a function of migration distance, ionic strength, and field intensity, were studied using laser fluorescence microscope. The mobility was found to follow a power law with the field intensity beyond a certain threshold. The detected DNA peak width was shown to be constant with migration distance, slightly smaller with stronger field intensity, but significantly decreased with higher ionic strength. The molecular dynamics simulation demonstrated that the peak width was strongly related with the conformation of DNA chains adsorbed onto surface. The results also implied that there was no diffusion of DNA during migration on surface. Therefore, the Nernst-Einstein relation is not valid in the surface electrophoresis and the separation rate could be improved without losing resolution by decreasing separation distance, increasing buffer concentration, and field intensity. The results indicate the fast separation of genomic DNA chains by surface electrophoresis is possible.     

Transflective liquid-crystal display using low-twisted vertically aligned mode

We present the design of a transflective and low-power LCD using a low-twist vertically aligned liquid crystal (LC) cell, achieved by blending a chiral additive with a patterned reflector in a single-domain configuration. Unlike the conventional single-domain transflective LCD, in which it is possible to optimize only one of the transmissive and reflective regions, the device suggests that it is possible to optimize both the transmission and reflection design to obtain favorable results in both reflective and transmissive light conditions by optimizing the chiral pitch and twist angle. From the parameter space diagram (PSD) method, which does not include the information on chiral pitch and the nonuniform LC director tilt angle, optimization focused on the transmissive region is performed. By analyzing the relation between the transmittance and the chiral pitch under the applied voltage, the optimized twist angle and chiral pitch are proposed. It is described that the optimized twist angle is also available for the reflective region by the dynamic PSD method by considering the average tilt angle under applied voltage.     

Anisotropic Hardening of Sheet Metals at Elevated Temperature: Tension-Compressions Test Development and Validation

New test equipment has been developed to measure the in-plane cyclic behavior of sheet metals at elevated temperatures. The tester has clamping dies with adjustable side force to prevent the sheet specimens from buckling during compressive loading. In addition to the room temperature experiment, cartridge type heaters are inserted in the clamping dies so that the specimen can be heated up to 400 °C during the cyclic tests. For the strain measurement, a non-contact type laser extensometer is used. In order to validate the newly developed test device, the tension-compression (and compression-tension) tests under pre-strains and various temperatures have been performed. As model materials, the aluminum alloy sheet which exhibits a large Bauschinger effect and the magnesium alloy sheet which exhibits different amounts of asymmetry under cyclic loading are used. The developed device can be well-suited to measure the cyclic material behavior, especially the anisotropic and asymmetric hardening of light-weight materials.