HELFIT: Helix fitting by a total least squares method

The problem of fitting a helix to data arises in analysis of protein structure, in nuclear physics, and in engineering. A continuous helix is described by five parameters: helix axis, helix radius, and helix pitch. One of these helix parameters is frequently predefined in the helix fitting. Other algorithms find only the helix axis or determine separately the helix axis, the helix radius, or the helix pitch. Here we describe a total least squares method, HELFIT, for helix fitting. HELFIT enables one to calculate simultaneously all five of the helix parameters with high accuracy. The minimum number of data points required for the analysis is only four. HELFIT is very insensitive to noise even in short helices. HELFIT also calculates a parameter, p = rmsd/(N − 1)^1/2, which estimates the regularity of helical structures independent of the number of data points, where rmsd is the root mean square distance from the best-fit helix to data points and N is the number of data points. It should become a basic tool of structural bioinformatics.     

Rupture and regeneration of colloidal crystals as studied by two-dimensional ultra-small-angle X-ray scattering

The structure of colloidal crystals of silica particles in water was studied by using the two-dimensional (2D) ultra-small-angle X-ray scattering (USAXS) technique. By violent shaking of the dispersion, large (body-centered cubic, bcc) crystals were broken into microcrystals while the lattice structure and lattice constant were preserved. The 2D-USAXS profiles revealed that the [111] direction of bcc microcrystals was parallel to the capillary axis and their orientational distribution with respect to the capillary axis was random. While a prepeak was observed in the one-dimensional USAXS measurements, no such peak was detected by the 2D-USAXS technique. The prepeak was concluded to be due to {110} being rotated by 54.7 degrees (the angle between [001] and [111]) from the capillary axis. The diffraction from the plane was out of the horizontal plane and was observed at a lower angle as a prepeak by detector scanning in the horizontal direction.     

Synthesis and evaluation of fluorogenic reagents for simultaneous detection of peptides and proteins by HPLC in two different samples

To find the pairs of fluorogenic reagents having similar retention times in HPLC but with different fluorescent characteristics, six fluorogenic reagents bearing benzoxadiazole or benzoselenadiazole skeletons were synthesized. The resultant derivatives obtained from the reaction of peptides and proteins with reagents which have a benzoselenadiazole skeleton showed different fluorescence characteristics from those with a benzoxadiazole skeleton. Since each corresponding derivatives of trypsin inhibitor and BSA with DAABD-Cl and 7-fluoro-N-[2-(diethylamino)ethyl]-2,1,3-benzoselenadiazole-4-sulfonamide (DEAEABSeD-F) have similar retention times, the pair of reagents was adopted for the sensitive simultaneous detection of proteins in two different samples. When the soluble fraction of mouse hippocampus was divided into the two samples (A and B), each was reacted with DEAEABSeD-F for A and DAABD-Cl for B, respectively. The two reaction solutions were combined and subjected to HPLC analysis with two fluorescent detectors in series (excitation and emission at different wavelengths for A and B, respectively). The resultant two chromatograms had quite similar patterns for each other. The new pair of fluorogenic reagents (DAABD-Cl and DEAEABSeD-F) would be applicable to proteomics studies using the previously reported FD-LC-MS/MS method.     

8-Endo selective Friedel-Crafts cyclization of vinyloxiranes with Co2(CO)6-complexed acetylene

An 8-endo selective Friedel-Crafts cyclization of vinyloxirane 8 with Co₂(CO)₆-complexed benzeneacetylene was found to give poly-functional eight-membered cyclic compound 9 in high yields.     

In situ ATR-IR investigation of L-lysine adsorption on montmorillonite

The adsorption behavior of lysine on montmorillonite in aqueous solution was investigated by in situ attenuated total reflectance infrared (ATR-IR) spectroscopy. To distinguish the protonation states of α-amino group, side-chain amino group and carboxyl group in lysine structure using ATR-IR spectra (i.e., NH₂ versus and COO⁻ versus COOH), pH-induced spectral changes of dissolved lysine were firstly measured and correlated with the thermodynamically calculated dissociation states of lysine (di-cationic, cationic, zwitterionic and anionic states). The obtained result was applied to interpret the ATR-IR spectra of lysine adsorbed on montmorillonite. We found that the adsorbed lysine was dominantly present as cationic state over the whole range of tested pH (pH = 4.9–9.7). This indicates that the adsorption is mainly driven by electrostatic interaction between the negatively charged montmorillonite surface and positively charged cationic lysine. We also found that lysine interacts with montmorillonite surface through the protonated side-chain amino group. This result suggests that lysine has a preferred vertical orientation, with the side-chain amino group pointing toward the surface.     

Label-free molecular beacon system based on DNAs containing abasic sites and fluorescent ligands that bind abasic sites

A new class of label-free molecular beacon (MB) system based on DNA strands that contain abasic (AP) sites (AP-DNA) and adopt stem-loop structures, in combination with fluorescent ligands that bind these AP sites, has been developed. Unlike a conventional MB, which requires covalent labeling of the MB with a fluorophore and a quencher, the developed system (APMB) does not require covalent attachment of signal transduction units. Detailed sensing functions of a series of APMB systems were examined with the aid of the fluorescent ligand named ATMND to provide insight into the design strategy for APMB systems. The effects of the stem length and the position of the AP site in the stem moiety on the fluorescence response of the APMB system were examined. Genotyping of a G/C SNP of PCR amplification products was successfully demonstrated with the APMB system and blue-fluorescent ATMND as a ligand. The APMB system was further extended to a system that utilized green-fluorescent lumiflavin.     

A theoretical (DFT, GIAO-NMR, NICS) study of the carbocations and oxidation dications from azulenes, homoazulene, benzazulenes, benzohomoazulenes, and the isomeric azulenoazulenes

Protonation of parent azulene (1), homoazulene (8), representative isomeric benzazulenes (9, 9A, and 9B), and benzohomoazulenes (10, 10A, and 10B) as well as the mono- and diprotonation of isomeric azulenoazulenes (11-16) were studied by DFT at the B3LYP/6-31G(d) level. The most likely carbocations were identified based on relative protonation energies. For comparison, complete experimental 13C NMR data were obtained for parent azulenium ion 1H+ and guaiazulenium ion 2H+ in TFA. The oxidation dications derived from benzazulenes (9, 9A, and 9B), benzohomoazulenes (10, 10A, and 10B) and azulenoazulenes (11, 16) were also investigated. For azulenoazulene dications the singlet and triplet states are both minima, but except for 11(2+) and 13(2+), the triplet states are higher in energy. Structural/geometrical changes in the carbocations were examined. GIAO-NMR, NPA charges (and changes in charges), and NICS (and delta NICS) were employed to compute the NMR chemical shifts (delta delta 13C values) in order to derive charge delocalization maps and to gauge relative aromaticitylantiaromaticity in the energetically most favored carbocations and oxidation dications. The emerging trends are discussed and compared. Creation of tropylium or homotropylium entities in the carbocations (monoprotonated) and carbodications (diprotonated) is identified as an important driving force governing the protonation outcomes. Consideration of the AM1-derived delta delta Hf values (and the DFT-derived delta delta G values) suggests that the two-electron oxidation of azulenoazulenes should be experimentally feasible. Given their antiaromatic (paratropic) character, azulenoazulene dications represent interesting targets for NMR study. GIAO-derived charge delocalization mapping allows the most likely sites for nucleophilic attack on the dications to be identified.     

Heat-Resistant Polymer-Grafted Carbon Black: Grafting of Poly(Organophosphazenes) onto Carbon Black Surface

Abstract

The grafting of poly(organophosphazenes) onto carbon black surface by the reaction of poly(dichlorophosphazene) (PDCP) with carbon black having sodium phenoxide groups was investigated. PDCP was prepared by the ring-opening polymerization of hexachlorocyclotriphos-phazene in solution using sulfamic acid as a catalyst. The introduction of sodium phenoxide groups onto carbon black was achieved by treatment of phenolic hydroxyl groups on the surface with sodium hydroxide in methanol. Poly(diphenoxyphosphazene) (PDPP) was successfully grafted onto carbon black by the reaction of PDCP with sodium phenoxide groups introduced onto the surface followed by the replacement of chlorine atoms in PDCP with phenoxy groups. The percentage of grafting onto carbon black increased to 206% at 30°C after 12 h. It was found that only 1.4% of sodium phenoxide groups on carbon black surface was used for the grafting of PDCP because of the blocking of the surface by grafted polymer chains. Poly(diaminophenylphosphazene) and poly-(diethoxyphosphazene) were also grafted onto carbon black surface by the treatment of PDCP-grafted carbon black with aniline and sodium ethoxide, respectively. Poly(organophosphazenes)-grafted carbon blacks produced stable colloidal dispersions in good solvents for grafted polymers. Furthermore, thermogravimetric analysis indicated that poly-(organophosphazenes)-grafted carbon blacks were stable in air about 300°C.