Structures of americanol A and isoamericanol A having a neurotrophic property from the seeds of Phytolacca americana.

The structures of new neo-lignans, isoamericanol A (1) and americanol A (2) isolated from the seeds of Phytolacca americana have been elucidated on the basis of spectroscopic data and then confirmed by chemical correlation with the previously known isoamericanin A (3) and americanin A (4). Isoamericanol A, americanol A, and americanin A have been found to enhance choline acetyltransferase activity at 10(-5) M in a cultured neuronal cell system derived from fetal rat hemisphere.     

Spectroscopic study on the crystal growth in gas evaporation: emission and absorption spectra from Cu smoke

Optical emission and absorption spectra from a growth zone in Cu smoke were measured by using a quartz prism spectrograph and a single-grating spectrophotometer. Atomic lines of Cu, band systems of Cu₂ were observed. Two new band systems with 0–0 band heads at 252.88 and 238.79 nm were found. The continuous spectra due to Rayleigh scattering by fine particles were also observed. Variations of density of various species as a function of vertical position were revealed.     

A study of embolizing materials for chemo-embolization therapy of hepatocellular carcinoma: embolic effect of cisplatin albumin microspheres using chitin and chitosan in dogs, and changes of cisplatin content in blood and tissue.

Hepatic artery of dogs was embolized with cisplatin (CDDP) albumin microspheres containing chitin and chitosan to investigate the in vivo CDDP release kinetics from CDDP albumin microspheres, the CDDP cumulative characteristics in the liver, and the influence of microsphere administration on hepatic tissue. Results showed that changes in blood CDDP content were dependent on CDDP albumin microsphere type and that release kinetics were better sustained when chitin was added to the microspheres or when the microspheres were treated with chitosan. In particular, the administration of CDDP in the chitin-containing CDDP chitosan albumin microspheres showed a blood CDDP content of approximately 0.26 micrograms Pt/ml 14 d after administration. The administration of chitin-containing or chitosan treated CDDP microspheres showed a CDDP content in the hepatic tissue of 0.14 to 0.23 micrograms Pt/g 28 d after administration. They also showed better control of CDDP release than those without chitin or chitosan treatment. No CDDP influence on hepatic tissue was observed. We conclude that, even in vivo, chitin and chitosan are effective embolic materials.     

Flow injection system with in-line Winkler's procedure using 16-way valve and spectrofluorimetric determination of dissolved oxygen in environmental waters

Flow injection spectrofluorimetry with in-line Winklers procedure was developed for the dissolved oxygen (DO) determination. 2-Thionaphthol reacted with iodine produced by Winkler’s method to form fluorescence inactive disulfide compound. To automate the process completely, a 5-channel flow system with a newly designed 16-way valve was assembled. The system consisted of a dispersion coil (DC), a precipitate formation coil (PFC), a precipitate dissolving coil (PDC), and extraction coil (EC). A calibration can be constructed by using a standard iodine solution for dissolved oxygen. The calibration graph was linear over the range 1.2×10⁻⁴∼6.0×10⁻⁴ mol l⁻¹ iodine (1.96∼9.80 mg O l⁻¹)). The relative standard deviation (n=6) was below 0.3% for the 4×10⁻⁴ mol l⁻¹ iodine (6.27 mg O l⁻¹) determination. The sample throughput was 12/h.     

New approaches to enantioselective fluorination: Cinchona alkaloids combinations and chiral ligands/metal complexes

The selective construction of carbon-fluorine bonds is of great interest to medicinal chemists because the replacement of a hydrogen or an oxygen atom with a fluorine atom in biologically active molecules can confer the molecules with improved physicochemical properties and biological activities. Since the first discovery of enantioselective fluorination using N-fluorocamphorsultam, our synthetic interest had been focused on the development of chiral N-fluorosulfonamide derivatives capable of enantioselective fluorination. However, these initial efforts revealed several limitations in both chemical yields and enantioselectivities of the fluorinated products. We present here the background of our personal story of the enantioselective fluorination reaction and some successful applications of the methods to the design and synthesis of biologically active products. Two novel approaches using cinchona alkaloid/Selectfluor^® combinations and chiral ligands/metal complexes have been pursued, respectively. In addition, the recent advances in this area by other groups are also described briefly.     

Crystal structures of n-alkanes with branches of different size in the middle

We synthesized four branched n-alkane samples C35-C1, C35-C4, C35-C6, and C35-C4Ph with the same number of carbons as the main chain, n = 35, to which the methyl, butyl, hexyl, and butyl phenyl groups were respectively attached at the middle, and also the corresponding linear homologue of C35, and studied their crystalline structures from DSC, IR, and Raman spectroscopy, X-ray diffraction measurement, and computer simulation. Solid-solid phase transitions characteristic of linear alkane C35 are not observed for any branched alkanes, and their melting temperatures Tm are lowered to 325.2, 318.5, 314.3, and 314.1K, respectively. Main chains of branched alkane molecules are not folded, irrespective of length and chemical structure of branches, but are extended to take the planar zigzag form in the solid state. The branches of C35-C4 and C35-C6 are also aligned inside the crystal in the extended form. Data analyses on solution-grown crystallized samples reveal that, with increasing the branch length, their crystal structures transform from polymorphic forms of the orthorhombic (P2(1)2(1)2(1)) and the triclinic (P) for C35-C1 and C35-C4 to the unique triclinic form for C35-C6 and C35-C4Ph, so as to minimize extra surface energy invoked by introduction of long branches.     

High-performance liquid chromatography of apolipoproteins in serum high-density lipoproteins

A simple and rapid method for apolipoprotein analysis in serum high-density lipoproteins (HDL) has been developed using high-performance liquid chromatography (HPLC) with sodium phosphate buffer (pH 7.0) containing 0.1% sodium dodecyl sulphate (SDS) as eluent. In contrast to the use of urea solution as an eluent, apolipoproteins can be analysed by applying an incubation mixture of HDL and the eluent buffer. A TSK-GEL column of G3000SW was found to be more profitable than G2000SW or G4000SW for analysis of HDL apolipoproteins. Elution patterns monitored by absorbance at 280 nm using a G3000SW column can give precise quantitative as well as qualitative information about apolipoproteins of molecular weight between 10(4) and 10(5). HPLC patterns of HDL apolipoproteins were compared between individual human subjects with various diseases. Elution profiles for lipid components in an incubation mixture were also examined.     

Transformation of arctiin to estrogenic and antiestrogenic substances by human intestinal bacteria

After anaerobic incubation of arctiin (1) from the seeds of Arctium lappa with a human fecal suspension, six metabolites were formed, and their structures were identified as (-)-arctigenin (2), (2R,3R)-2-(3',4'-dihydroxybenzyl)-3-(3",4"-dimethoxybenzyl)butyrolactone (3), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3",4"-dimethoxybenzyl)butyrolactone (4), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3"-hydroxy-4"-methoxybenzyl)butyrolactone (5), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3",4"-dihydroxybenzyl)butyrolactone (6), and (-)-enterolactone (7) by various spectroscopic means including two dimensional (2D)-NMR, mass spectrometry, and circular dichroism. A possible metabolic pathway was proposed on the basis of their structures and the time course of the transformation. Enterolactones obtained from the biotransformation of arctiin and secoisolariciresinol diglucoside (SDG, from the seeds of Linum usitatissium) by human intestinal bacteria were proved to be enantiomers, with the (-)-(2R,3R) and (+)-(2S,3S) configurations, respectively. Compound 6 showed the most potent proliferative effect on the growth of MCF-7 human breast cancer cells in culture among 1 and six metabolites, while it showed inhibitory activity on estradiol-mediated proliferation of MCF-7 cells at a concentration of 10 microM. These results indicate that the transformation of 1 by intestinal flora might be essential for the manifestation of the estrogenic and antiestrogenic activity of 1.     

Enhancing chemical analysis with signal derivatization using simple available software packages

Derivative techniques for analytical signal processing are useful for solving some noise and signal resolution problems in various fields of study such as titrimetry, spectrophotometry, chromatography and electrochemistry. The broad use of these techniques, however, is often limited by costly inflexible built-in software packages in commercial analytical instruments. We propose here the application of commercial simple software packages such as Microsoft® Excel and Microcal Origin for signal smoothing and fitting, and for obtaining derivative analytical signals in batch and flow-based analyses, including potentiometric titration, spectrophotometry, chromatography, voltammetry and sequential injection analysis (SIA). The worldwide (especially Excel) software packages are easy-to-use for less experienced users and have also capabilities for advanced users, and therefore employing such packages can result in expansion of useful derivative techniques. We demonstrate application of the available package-aided derivative capabilities for enhancing some chemical analyses, including potentiometric acid–base titration, Bradford assay of protein, chromatographic separation of ajmaline and reserpine and anodic stripping voltammetry of copper. The derivative signals from smoothed and fitted curves offer better accuracy and precision, even for non-resolving peaks and tailing peaks. In some cases, the optimization of experimental conditions is not further required, which can lead to fast method development.