Catalytic asymmetric syntheses and biological activities of singly dehydroxylated 19-nor-1alpha,25-dihydroxyvitamin D(3) A-ring analogs in cancer cell differentiation and apoptosis

BACKGROUND: 1alpha,25-Dihydroxyvitamin D(3) (1alpha,25(OH)(2)D(3)) has been shown to modulate not only proliferation and differentiation, but also apoptosis in malignant cells, indicating that it could be useful for treating cancer. Little information is available concerning the structural motifs of the 1alpha, 25(OH)(2)D(3) molecule responsible for modulation of differentiation and apoptosis, however. We set out to synthesize singly dehydroxylated A-ring analogs of 19-nor-1alpha,25(OH)(2)D(3) in a catalytic asymmetric fashion, and to investigate their biological activities in leukemia HL-60 cells. RESULTS: A series of singly dehydroxylated 19-nor-1alpha,25-dihydroxyvitamin D(3) A-ring analogs were synthesized using a combinatiorial sequence of regioselective propiolate-ene reaction and catalytic asymmetric carbonyl-ene cyclization. Surprisingly, the analogs could be clearly divided into two categories; one group, bearing 1alpha-hydroxy or 3beta-hydroxy groups in the A-ring, were potent differentiators and the second group, bearing 1beta-hydroxy or 3alpha-hydroxy groups, were potent stimulators of apoptosis. CONCLUSIONS: We have clearly identified the structural motifs of 19-nor-1alpha,25(OH)(2)D(3) analogs responsible for differentiation and apoptosis in HL-60 cells. These findings will provide useful information not only for development of therapeutic agents for treatment of leukemia and other cancers, but also for structure-function studies of 1alpha,25(OH)(2)D(3).     

Practical asymmetric synthesis of (S)-MA20565, a wide-spectrum agricultural fungicide

A practical asymmetric synthesis of a wide-spectrum agricultural fungicide, (S)-MA20565 (1), is described. The convergent synthesis was achieved starting from commercially available 3-(trifluoromethyl)aniline (7) in 44% overall yield through five steps and 2-bromobenzaldehyde (9) in 48% overall yield through four steps, respectively. (S)-O-[1-(3-Trifluoromethylphenyl)ethyl]hydroxylamine (2), a key intermediate of 1, was prepared via ruthenium(II)-catalyzed asymmetric transfer hydrogenation of 1-(3-trifluoromethylphenyl)ethanone (6) followed by chlorination using methanesulfonyl chloride and oxyamination using potassium acetohydroxamate with high level of stereocontrol.     

Conversion of quassinoids for enhancement of inhibitory effect against Epstein-Barr virus early antigen activation. Introduction of lipophilic side chain and esterification of diosphenol

Introduction of a senecioyl group into shinjulactones B and C, and esterification of the diosphenol moiety in brusatol and brucein A enhanced inhibitory effect against Epstein-Barr virus early antigen activation.     

Characterization of Ultra‐Thin Temperature‐Responsive Polymer Layer and Its Polymer Thickness Dependency on Cell Attachment/Detachment Properties

Ultra thin poly(N‐isopropylacrylamide) (PIPAAm) modified glass coverslips (PIAPAm‐CS) using electron beam irradiation exhibited a clear relationship between the polymer thickness and thermal cell adhesion/detachment behavior. The polymer thickness dependency and the characteristic of ultra thin PIPAAm layer, has been illustrated in terms of the molecular motion of the modified PIPAAm chains. PIPAAm‐CSs surfaces with various area‐polymer densities and thicknesses were characterized by AFM and protein adsorption assay. The newly obtained results gave a further insight into the illustration. Finally, the future application of intelligent surfaces was discussed for fabricating tissue and organ.

     

Synthesis and ring‐opening polymerizations of novel S‐glycooxazolines

A new 2‐oxazolines containing S‐galactosyl substituents linked to alkyl chains of different lengths; (S‐glycooxazoline) were prepared relatively in high yields. By using a 1:1 adduct of 2‐methyl‐2‐oxazoline and methyl triflate, as the initiator, the monomer was polymerized via ring‐opening polymerization (ROP) to give products with relatively narrow molecular weight distributions. Homo‐ and copolymerization were performed, and the kinetics of these new S‐glycooxazolines in the ROP are investigated. After a quantitative deprotection, poly(2‐oxazoline)s having pendant carbohydrate were obtained. The interaction of the poly(S‐glycooxazoline) with RCA₁₂₀ lectin was investigated, the binding constant between glycopolymer and lectin was increased by 10² times compared with that of the monosaccharide (D ‐galactose). The in vivo expression of green fluorescent protein using the synthesized poly(S‐glycooxazoline)s as polymeric inducers in Escherichia coli host were performed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology

The paper presents a procedure for the multi-element inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology. Total As(III, V), Se(IV, VI) and Sb(III, V) were determined according to the following procedure: titanium dioxide (TiO₂) was used to adsorb inorganic species of As, Se and Sb in sample solution; after filtration, the solid phase was prepared to be slurry for determination. For As(III), Se(IV) and Sb(III), their inorganic species were coprecipitated with Pb-PDC, dissolved in dilute nitric acid, and then determined. The concentrations of As(V), Se(VI) and Sb(V) can be calculated by the difference of the concentrations obtained by the above determinations. For the determination of As(III), Se(IV) and Sb(III), palladium was chosen as a modifier and pyrolysis temperature was 800 °C. Optimum conditions for the coprecipitation were listed for 100 ml of sample solution: pH 3.0, 15 min of stirring time, 40.0 μg l⁻¹ Pb(NO₃)₂ and 150.0 μg l⁻¹ APDC. The proposed method was applied to the determination of trace amounts of As(III, V), Se(IV, VI) and Sb(III, V) in river water and seawater.     

Dry and wet prolines for asymmetric organic solvent-free aldehyde-aldehyde and aldehyde-ketone aldol reactions

Dry and wet prolines were found to catalyze the direct aldol reactions of aldehyde-aldehyde and aldehyde-ketone, respectively, to afford aldols with excellent diastereo- and enantioselectivities, and an organic solvent-free reaction was realized in some cases.     

Mechanistic study of a Pd/C-catalyzed reduction of aryl sulfonates using the Mg-MeOH-NH(4)OAc system

A method for the deoxygenation of phenolic hydroxy groups via aryl triflates or mesylates has been established by using a combination of Pd/C-Mg-MeOH. The addition of NH(4)OAc to the system markedly accelerated the reaction rate and expanded the scope of the reaction. Mechanistic studies suggested that a single-electron transfer process from the Pd(0) center to the benzene ring is involved in the reduction of aryl sulfonates and that NH(4)OAc works as a solubilization reagent of the Mg salt and as an accelerator of the electron transfer, thus enhancing the reaction process. Our method was also applicable to the regioselective deuteration of benzene derivatives with CH(3)OD as the solvent and deuterium source: the original hydroxy group could be efficiently replaced with a deuterium atom.     

Sequence-dependent conformational energy of DNA derived from molecular dynamics simulations: toward understanding the indirect readout mechanism in protein-DNA recognition

Sequence dependence of DNA conformation plays a crucial role in its recognition by proteins and ligands. To clarify the relationship between sequence and conformation, it is necessary to quantify the conformational energy and specificity of DNA. Here, we make a systematic analysis of dodecamer DNA structures including all the 136 unique tetranucleotide sequences at the center by molecular dynamics simulations. Using a simplified conformational model with six parameters to describe the geometry of adjacent base pairs and harmonic potentials along these coordinates, we estimated the equilibrium conformational parameters and the harmonic potentials of mean force for the central base-pair steps from many trajectories of the simulations. This enabled us to estimate the conformational energy and the specificity for any given DNA sequence and structure. We tested our method by using sequence-structure threading to estimate the conformational energy and the Z-score as a measure of specificity for many B-DNA and A-DNA crystal structures. The average Z-scores were negative for both kinds of structures, indicating that the potential of mean force from the simulation is capable of predicting sequence specificity for the crystal structures and that it may be used to study the sequence specificity of both types of DNA. We also estimated the positional distribution of conformational energy and Z-score within DNA and showed that they are strongly position dependent. This analysis enabled us to identify particular conformations responsible for the specificity. The presented results will provide an insight into the mechanisms of DNA sequence recognition by proteins and ligands.