Biological stereoselective reduction of 3,3,5-trimethylcyclohexanone by Glomerella cingulata

The microbial transformation of 3,3,5-trimethylcyclohexanone was investigated using the plant pathogenic fungus, Glomerella cingulata. With this organism 3,3,5-trimethylcyclohexanone gave the corresponding cis- and trans-3,3,5-trimethylcyclohexanols with the ratio of 20:1 forming the cis-isomer highly stereoselectively, upon 5 days incubation together with 3,3,5-trimethyl-2-cyclohexen-1-one (isophrone) as a minor product.     

Effect of Coriolis force on counter-current chromatographic separation by centrifugal partition chromatography

The effect of Coriolis force on the counter-current chromatographic separation was studied using centrifugal partition chromatography (CPC) with four different two-phase solvent systems including n-hexane-acetonitrile (ACN); tert-butyl methyl ether (MtBE)-aqueous 0.1% trifluoroacetic acid (TFA) (1:1); MtBE-ACN-aqueous 0.1% TFA (2:2:3); and 12.5% (w/w) polyethylene glycol (PEG) 1000-12.5% (w/w) dibasic potassium phosphate. Each separation was performed by eluting either the upper phase in the ascending mode or the lower phase in the descending mode, each in clockwise (CW) and counterclockwise column rotation. Better partition efficiencies were attained by the CW rotation in both mobile phases in all the two-phase solvent systems examined. The mathematical analysis also revealed the Coriolis force works favorably under the CW column rotation for both mobile phases. The overall results demonstrated that the Coriolis force produces substantial effects on CPC separation in both organic-aqueous and aqueous-aqueous two-phase systems.     

C11H12 Hydrocarbons—II : Preparation of tricyclo[5.4.0.0]undeca-3,8,10-triene a norbornenone route from cycloheptatriene

A stereoselective 6-step synthesis of the C₁₁H₁₂ hydrocarbon cis,anti,cis-tricyclo[5.4.0.0^2,5]undeca-3,8,10-triene (2a) is described. The dichloro compound 3c was prepared by the selective reduction of 3a with chromous perchlorate-ethylenediamine complex, a general reagent for this type of transformation. Irradiation of 3c produced 6a and 7a in ∼ 7:1 ratio. Reduction of the mixture with sodium produced ketal mixture 6b and 7b. The ketals were hydrolyzed to ketones 6c and 7c and the ketones decarbonylated to 2a and an isomeric hydrocarbon tentatively assigned as homobasketene 2b′. Hydrocarbon 2a was readily obtained pure by a silver nitrate extraction procedure and 2b′ by preparative VPC. It was shown that pure 6c gives only 2a and therefore, 7c is the source of 2b′. The stereochemical assignments, based on both spectral and chemical evidence, are discussed.     

Synthesis, Characterization, and Crystal Structure of a (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) Complex with a Dinucleating Hexapyridine Ligand, 1,2-Bis[2-(bis(2-pyridyl)methyl)-6-pyridyl]ethane. The First Example of a Discrete (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) Complex with a Dinucleating Ligand

A mononucleating tripyridine ligand, 2-(bis(2-pyridyl)methyl)-6-methylpyridine (L(1)), and a dinucleating hexapyridine ligand, 1,2-bis[2-(bis(2-pyridyl)methyl)-6-pyridyl]ethane (L(2)), have been prepared. The reaction of a carbanion of 2,6-lutidine with 2-bromopyridine affords L(1) which is converted to L(2) quantitatively by treating with tert-butyllithium and 1,2-dibromoethane. (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) complexes [Fe(2)(O)(OAc)(2)(L(1))(2)](ClO(4))(2) (1) and [Fe(2)(O)(OAc)(2)L(2)](ClO(4))(2) (2) have been synthesized and characterized by means of infrared, UV/vis, mass, and M?ssbauer spectroscopies and by measuring magnetic susceptibility and cyclic voltammograms. All the spectral data are consistent with the (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) core structure in both 1 and 2. A relatively strong molecular ion peak at m/z 865 corresponding to [{Fe(2)O(OAc)(2)L(2)}(ClO(4))](+) in a FAB mass spectrum of 2 suggests the stabilization of the (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) core structure by L(2) in a solution state. The compound 2.DMF.2-PrOH.H(2)O, chemical formula C(44)Cl(2)Fe(2)H(51)N(7)O(16), crystallizes in the monoclinic space group C2/c with a = 22.034(6) ?, b = 12.595(5) ?, c = 20.651(7) ?, beta = 121.49(2) degrees, and Z = 4. The cation has 2-fold symmetry with the bridging oxygen atom on the 2-fold axis: Fe-(&mgr;-O) = 1.782(5) ?, Fe-O-Fe = 123.6(6) degrees, and Fe.Fe = 3.142(3) ?. The diiron(III) core structure of 2 seems to be stabilized by encapsulation of the ligand. Compound 2 is the first example of a discrete (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) complex with a dinucleating ligand.     

Synthesis of 1-arylacenaphtho[1,2-d]pyrazoles and 5,7-Dehydro-5H,7H-benzo[b]acenaphtho[1,2-e]-1,3a,6a-triazapentalenes

2-Benzoyl- 5 and 2-acetylacenaphthenone 6 , prepared from the corresponding 1-acyl-2-(1-pyrrolidinyl)-acenaphthylenes 2 and 3 , reacted with arylhydrazines 8 under acidic conditions to give the corresponding 1-arylacenaphtho[1,2-d]pyrazoles 9 and 10 . Novel heteropentalene mesomeric betaines, 5,7-dehydro-5H,7H-benzo[b]acenaphtho[1,2-e]-1,3a,6a-triazapentalenes 13 and 14 were prepared by reductive cyclization of 1-(o-nitrophenyl)acenaphtho[1,2-d]pyrazoles 9d and 10d , respectively.     

Rates of polymer formation and monomer consumption in the solution polymerization of trioxane catalyzed by BF3 · O(C2H5)2

In the solution polymerization of trioxane catalyzed by BF₃ · O(C₂H₅)₂ at 30°C. the amount of the methanol-insoluble polyoxymethylene is less than the amount of monomer consumed. This difference was much larger than the amount of formaldehyde determined in the polymerized system and could not also be explained in terms of the amount of the methanol-soluble oligomer. Tetraoxane was detected in large quantities by gas chromatography in the polymerized solution of trioxane. Therefore, the difference between the amounts of the methanol-insoluble polymer and the monomer consumed was ascribed partly to the formation of tetraoxane. In spite of the fact that tetraoxane was polymerized more easily than trioxane by BF₃ · O(C₂H₅)₂, an almost constant amount of tetraoxane was produced, independent of the kind of solvent and the polymer yield. This suggests the existence of an equilibrium concentration of tetraoxane. On the other hand, the formation of trioxane was observed in the solution polymerization of tetraoxane by BF₃ · O(C₂H₅)₂. This suggests that the formation of tetraoxane during the trioxane polymerization is due to a back-biting reaction in which the growing chain end of trioxane attacks the oxygen atom in its own chain with depolymerization of tetraoxane.     

Determination of selenium in sediments by hydride generation atomic absorption spectrometry. Elimination of interferences

Summary The hydride generation/atomic absorption spectrometry (AAS) with an automated flow system is useful for the routine analysis of selenium in environmental samples. This method is, however, subject to interferences from transition metal ions and other hydride forming ions. The conditions to minimize the interferences were established: the concentration of hydrochloric acid 6 mol/l; the concentration of tetrahydroborate 0.5%. Iron(III) chloride released the depression of selenium signals by metal ions such as copper(II) and bismuth(III). Selenium in several standard reference materials including sediment samples was determined by the present method and by fluorimetry with 2,3-diaminonaphthalene. The results obtained by the two methods agreed with an acceptable precision. This means that hydride generation/AAS offers good precision and accuracy in the determination of selenium in sediment samples as well as DAN fluorimetry. However, the former is much simpler in operation. The method was applied to the determination of selenium in estuarine sediments collected in Nagoya harbor and Ise Bay. The results can be used to assess the pollution state of these places.

---

Selenbestimmung in Sedimenten durch AAS mit Hydriderzeugung. Eliminierung von Störungen

     

Large volume preconcentration and purification for determining the240Pu/<Superscript>239</Superscript>Pu isotopic ratio and <Superscript>238</Superscript>Pu/<Superscript>239+240</Superscript>Pu alpha-activity ratio in seawater

Summary The present paper describes a new analytical method for determining the ²⁴⁰Pu/²³⁹Pu isotopic ratio and ²³⁸Pu/^239+240Pu α -activity ratio in seawater, both of which are important parameters for determining Pu sources in the ocean. Plutonium isotopes were preconcentrated from a large volume of seawater (4700-10800 liter) by solid phase extraction using MnO₂-impregnated fibers and eluted into 3M HCl. After the elution, the Pu species of all oxidation states were converted to Pu(IV) using NaNO₂, purified by solvent extraction using thenoyltrifluoroacetone (TTA)-benzene, and concentrated in 5 ml of 0.2M HNO₂. The ²⁴⁰Pu/²³⁹Pu and ²³⁸Pu/^239+240Pu ratios in the 5-ml final solution were determined by inductively coupled plasma-mass spectrometry (ICP-MS) and α-spectrometry, respectively. A pg level of Pu, which was a sufficiently large amount for the determination, was obtained by the solid phase extraction. Through the redox conversion and solvent extraction, the Pu species, such as Pu(III), Pu(IV) and Pu(VI), were collected at a high recovery of 96±2% (n=3) despite the presence of large amounts of Mn, and interfering ²³⁸U (3.3 μg^. l^-1in seawater) was effectively removed with a decontamination factor of 1.7·10⁷. The accuracy of the method for the ²⁴⁰Pu/²³⁹Pu ratio was verified using reference materials of seawater and a terrestrial soil sample. The present technique was applied to the determination of the ²⁴⁰Pu/²³⁹Pu and ²³⁸Pu/^239+240Pu ratios in coastal and oceanic water.     

Metal complex with terpyrindine derivative ligand as highly selective colorimetric sensor for iron(Ⅲ)

A new metal complex[MnL₂]（NO₃）₂·CH₃CN（1） was synthesized by reaction of 4’-4-（l,2,4-triazol-l-yl）phenyl -2,2’:6’,2"-terpyridine（L） with manganese nitrate.The structure of the complex was determined by X-ray crystallography.The results of UV-vis studies showed that the complex exhibits colorimetric sensing ability for Fe³⁺,which can be observed by naked eye.