Total Synthesis of Natural PI-091, a New Platelet Aggregation Inhibitor of Microbial Origin

The total synthesis of a new platelet aggregation-inhibiting gamma-lactam PI-091 (1) gave a 1:1 diastereomeric mixture at the gamma-ketal carbon. The high-yielding aldol reaction of an appropriately protected 1,3,4-trihydroxy-4-methyldecan-2-one 42, prepared from D-glucose, with the kinetically generated enolate of 3-methyl-2-butanone provided 43. The resulting diastereomeric mixture of the aldol adduct 43 was converted to a 2,4-alkylated furan 45 via an intramolecular ketalization followed by dehydration. The addition of a singlet oxygen to the alpha-trimethylsilylated furan 48derived from 45 under photochemical conditions efficiently provided an alpha,gamma-dialkylated gamma-hydroxy gamma-lactone 47. The transformation of methyl ketal 52 prepared from 47 into gamma-hydroxy gamma-lactam 53 was achieved by exposure to liquid ammonia in MeOH. The total synthesis of 1 was achieved from 52 through the Dess-Martin periodinane oxidation of the secondary hydroxy group in the side chain. The present total synthesis revealed that the stereogenic carbon center in the side chain in natural 1 is S.     

Stabilization of the Charge‐Separated States of Covalently Linked Zinc Porphyrin–Triphenylamine–[60]Fullerene

Spectroscopic, redox, computational, and electron transfer reactions of the covalently linked zinc porphyrin–triphenylamine–fulleropyrrolidine system are investigated in solvents of varying polarity. An appreciable interaction between triphenylamine and the porphyrin π system is revealed by steady‐state absorption and emission, redox, and computational studies. Free‐energy calculations suggest that the light‐induced processes via the singlet‐excited porphyrin are exothermic in benzonitrile, dichlorobenzene, toluene, and benzene. The occurrence of fast and efficient charge‐separation processes (≈10¹² s^?1) via the singlet‐excited porphyrin is confirmed by femtosecond transient absorption measurements in solvents with dielectric constants ranging from 25.2 (benzonitrile) to 2.2 (benzene). The rates of the charge separation processes are much less solvent‐dependent, which suggests that the charge‐separation processes occur at the top region of the Marcus parabola. The lifetimes of the singlet radical‐ion pair (70–3000 ps at room temperature) decrease substantially in more polar solvents, which suggests that the charge‐recombination process is occurring in the Marcus inverted region. Interestingly, by utilizing the nanosecond transient absorption spectral technique we can obtain clear evidence about the existence of triplet radical‐ion pairs with relatively long lifetimes of 0.71 μs (in benzonitrile) and 2.2 μs (in o‐dichlorobenzene), but not in toluene and benzene due to energetic considerations. From the point of view of mechanistic information, the synthesized zinc porphyrin–triphenylamine–fulleropyrrolidine system has the advantage that both the lifetimes of the singlet and triplet radical‐ion pair can be determined.     

Synthesis and characterization of poly(1,4‐bis((E)‐2‐(3‐dodecylthiophen‐2‐yl)vinyl)benzene) derivatives

New amorphous semiconducting copolymers, poly(9,9‐dialkylfluorene)‐alt‐(3‐dodecylthienyl‐divinylbenzene‐3‐dodecylthienyl) derivatives (PEFTVB and POFTVB), were designed, synthesized, and characterized. The structure of copolymers was confirmed by H NMR, IR, and elemental analysis. The copolymers showed very good solubility in organic solvents and high thermal stability with high T_g of 178–185 °C. The weight average molecular weight was found to be 107,900 with polydispersity of 3.14 for PEFTVB and 76,700 with that of 3.31 for POFTVB. UV–vis absorption studies showed the maximum absorption at 428 nm (in solution) and 435 nm (in film) for PEFTVB and at 430 nm (in solution) and 436 nm (in film) for POFTVB. Photoluminescence studies showed the emission at 498 nm (in solution) and 557 nm (in film) for PEFTVB and at 498 nm (in solution) and 536 nm (in film) for POFTVB. The solution‐processed thin‐film transistors showed the carrier mobility of 2 × 10^?4 cm² V^?1 s^?1 for PEFTVB‐based devices and 2 × 10^?5 cm² V^?1 s^?1 for POFTVB‐based devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3942–3949, 2010     

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

2,3,4,5,6‐Pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T_gs) of the copolymers were found positively deviated from the Gordon–Taylor equation. The positive deviation could be accounted for by dipole–dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T_g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one‐third of that for pure PMMA. The fluorinated styrenes‐MMA copolymers were thermally stable up to 420 °C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 °C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with nonfluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Enhancement of CO2 sorption uptake on hydrotalcite by impregnation with K2CO3

The awareness of symptoms of global warming and its seriousness urges the development of technologies to reduce greenhouse gas emissions. Carbon dioxide (CO(2)) is a representative greenhouse gas, and numerous methods to capture and storage CO(2) have been considered. Recently, the technology to remove high-temperature CO(2) by sorption has received lots of attention. In this study, hydrotalcite, which has been known to have CO(2) sorption capability at high temperature, was impregnated with K(2)CO(3) to enhance CO(2) sorption uptake, and the mechanism of CO(2) sorption enhancement on K(2)CO(3)-promoted hydrotalcite was investigated. Thermogravimetric analysis was used to measure equilibrium CO(2) sorption uptake and to estimate CO(2) sorption kinetics. The analyses based on N(2) gas physisorption, X-ray diffractometry, Fourier transform infrared spectrometry, Raman spectrometry, transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy were carried out to elucidate the characteristics of sorbents and the mechanism of enhanced CO(2) sorption. The equilibrium CO(2) sorption uptake on hydrotalcite could be increased up to 10 times by impregnation with K(2)CO(3), and there was an optimal amount of K(2)CO(3) for a maximum equilibrium CO(2) sorption uptake. In the K(2)CO(3)-promoted hydrotalcite, K(2)CO(3) was incorporated without changing the structure of hydrotalcite and it was thermally stabilized, resulting in the enhanced equilibrium CO(2) sorption uptake and fast CO(2) sorption kinetics.     

Dependency of ligand free energy landscapes on charge parameters and solvent models

We performed replica-exchange molecular dynamics (REMD) simulations of six ligands to examine the dependency of their free energy landscapes on charge parameters and solvent models. Six different charge parameter sets for each ligand were first generated by RESP and AM1-BCC methods using three different conformations independently. RESP charges showed some conformational dependency. On the other hand, AM1-BCC charges did not show conformational dependency and well reproduced the overall trend of RESP charges. The free energy landscapes obtained from the REMD simulations of ligands in vacuum, Generalized-Born (GB), and TIP3P solutions were then analyzed. We found that even small charge differences can produce qualitatively different landscapes in vacuum condition, but the differences tend to be much smaller under GB and TIP3P conditions. The simulations in the GB model well reproduced the landscapes in the TIP3P model using only a fraction of the computational cost. The protein-bound ligand conformations were rarely the global minimum states, but similar conformations were found to exist in aqueous solution without proteins in regions close to the global minimum, local minimum or intermediate states.     

Preparation of alpha-elastin nanoparticles by gamma irradiation

Nanoparticles were prepared by utilizing the thermosensitive aggregation of alpha-elastin and gamma ray crosslinking. Three different heating process, “Slow heating”, “Fast heating”, and “Heat shock”, were applied for the aggregation of the alpha-elastin and examined to yield nanoparticles by gamma rays crosslinking. As a result, only “Slow heating” process yielded nanoparticles with diameters of about ca. 300 nm above cloud point (CP) and about ca. 100 nm below CP, and a narrow size distribution above 1.0 mg/ml concentration (exclude 1.0 mg/ml).     

Rapid vapor-phase fabrication of organic-inorganic hybrid superlattices with monolayer precision

We report a new layer-by-layer growth method of self-assembled organic multilayer thin films based on gas-phase reactions. In the present molecular layer deposition (MLD) process, alkylsiloxane self-assembled multilayers (SAMs) were grown under vacuum by repeated sequential adsorptions of C=C-terminated alkylsilane and titanium hydroxide. The MLD method is a self- limiting layer-by-layer growth process, and is perfectly compatible with the atomic layer deposition (ALD) method. The SAMs films prepared exhibited good thermal and mechanical stability, and various unique electrical properties. The MLD method, combined with ALD, was applied to the preparation of organic-inorganic hybrid nanolaminate films in the ALD chamber. The organic-inorganic hybrid superlattices were then used as active mediums for two-terminal electrical bistable devices. The advantages of the MLD method with ALD include accurate control of film thickness, large-scale uniformity, highly conformal layering, sharp interfaces, and a vast library of possible materials. The MLD method with ALD is an ideal fabrication technique for various organic-inorganic hybrid superlattices.     

Preparation and condensation reactions of a new light-fluorous Mukaiyama reagent: reliable purification with fluorous solid phase extraction for esters and amides

A modified light-fluorous Mukaiyama reagent bearing a C₈F₁₇ tag was prepared and examined in ester and amide forming condensation reactions. Following the reactions, the desired product was effectively separated from the fluorous pyridone by-product using a simple fluorous solid phase extraction.