Surface composition of prepared tungsten carbide and its catalytic activity

The surface composition and electronic structure of carburized tungsten trioxide, which is prepared by heating WO₃ in carbon monoxide atmosphere at 700°C, are investigated using X-ray photoelectron spectroscopy (XPS). The relationship between the surface composition and the catalytic activity for methanol electro-oxidation is clarified. The formation of tungsten carbide at the surface enhances the catalytic activity. On the other hand, the presence of free carbon or tungsten trioxide in the surface layer reduces the activity remarkably. It is also shown that, the higher the electronic density of states near the Fermi level, the higher the catalytic activity. Additionally, the catalytic behavior of tungsten carbide for methanol electro-oxidation is mentioned.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Magnetic behavior of Fe0.2Mg0.8TiO3 and Fe0.3Mg0.7TiO3 probed by Mössbauer timescale

Magnetization and Mössbauer measurements have been made on a diluted antiferromagnets Fe_xMg_1?xTiO₃ with x=0.2, 0.3 and 0.7. It has been demonstrated that this system exhibits a spin glass or a reentrant spin glass like behavior in the samples with x around the percolation concenrration x_c≈0.25. It has been shown that various sizes of magnetic clusters are formed well above the transition temperatures determined by the magnetization measurements in the samples with x near x_c. The behavior of Fe_0.2Mg_0.8TiO₃ is discussed as a typical cluster glass.     

Electrochemical formation of porous superlattices on n-type (1 0 0) InP

The present work deals with the electrochemical formation of superlattice structures on n-type (1 0 0) InP in HCl solutions. The superlattices consist of a stack of two layers with alternating high and low porosity on n-type material obtained by changing the anodizing current or the potential periodically in HCl solutions. The superlattice structures were characterized by scanning electron microscopy. The pore morphology and structure depend strongly on the electrochemical conditions. For anodization with low currents (e.g., 1 or 10 mA) or at low potentials (e.g., 1.5 V_Ag/AgCl), a porous layer with a facet-like structure was formed. For higher currents or potentials, such as 50 or 100 mA or 3 V_Ag/AgCl, respectively, a tree-like structure with random and/or tangled branches was observed. Finally, samples anodized at 5 V_Ag/AgCl, show a porous layer with a regular array of straight pores. The morphology and structure of the stacks of the porous layers can be controlled in the nanometer range, depending on the electrochemical conditions.     

Establishment of hybrid-derived offspring populations in the Ohomopterus ground beetles through unidirectional hybridization

An approach to deduce the mechanism of stabilization of the hybrid-derived populations in the Ohomopterus ground beetles has been made by comparative studies on the phylogenetic trees of the mitochondrial and nuclear DNA. A phylogenetic tree based on the internal transcribed spacer (ITS) of nuclear ribosomal gene roughly reflects the relations of morphological species group, while mitochondrial NADH dehydrogenase subunit 5 (ND5) gene shows a considerable different topology on the tree; there exist several geographically-linked lineages, most of which consist of more than one species. These results suggest that the replacement of mitochondria has occurred widely in the Ohomopterus species. In most cases, hybridization is unidirectional, i.e., the species A (♂) hybridized with another species B (♀) and not vice versa, with accompanied replacement of mitochondria of A by those of B. The results also suggest that partial or complete occupation of the distribution territory by a hybrid-derived morphological species. The morphological appearance of the resultant hybrid-derivatives are recognized as that of the original species A. Emergence of a morphological new species from a hybrid-derived population has been exemplified.     

Design of a widely tunable laser with a chirped ladder filter

We theoretically investigated a digitally tunable laser with a chirped ladder filter and a ring resonator to obtain a wide wavelength tuning range covering the whole C- or L- band. The clear relation between the tuning range and laser structure, especially the ladder filter, is described analytically. The introduction of a chirped structure into a ladder filter is effective in achieving both wide tunability and a stable lasing mode. A numerical simulation based on multimode rate equations shows that a tuning range of over 40 nm and a mode suppression ratio over 40 dB can be achieved by introducing a chirped ladder filter.     

Demonstration of an optical quantum controlled-NOT gate without path interference

We report the first experimental demonstration of an optical quantum controlled-NOT gate without any path interference, where the two interacting path interferometers of the original proposals have been replaced by three partially polarizing beam splitters with suitable polarization dependent transmittance and reflectance. The performance of the device is evaluated using a recently proposed method, by which the quantum process fidelity and the entanglement capability can be estimated from the 32 measurement results of two classical truth tables, significantly less than the 256 measurement results required for full quantum tomography.