A Tandem Queue with Coupled Processors: Computational Issues

In Resing and Örmeci [16] it is shown that the two-stage tandem queue with coupled processors can be solved using the theory of boundary value problems. In this paper we consider the issues that arise when calculating performance measures like the mean queue length and the fraction of time a station is empty. It is assumed that jobs arrive at the first station according to a Poisson process and require service at both stations before leaving the system. The amount of work that a job requires at each of the stations is an independent, exponentially distributed random variable. When both stations are nonempty, the total service capacity is shared among the stations according to fixed proportions. When one of the stations becomes empty, the total service capacity is given to the nonempty station. We study the two-dimensional Markov process representing the numbers of jobs at the two stations. The problem of finding the generating function of the stationary distribution can be reduced to two different Riemann-Hilbert boundary value problems, where both problems yield a complete analytical solution. We discuss the similarities and differences between the two problems, and relate them to the computational aspects of obtaining performance measures.     

Spin Axioms in Different Geometries of Relativistic Continuum Physics

The 24 components of the relativistic spin tensor consist of 3 + 3 basic spin fields and 9 + 9 constitutive fields. Empirically only three basic spin fields and nine constitutive fields are known. This empirem can be expressed by two spin axioms, one of them denying purely relativistic spin fields, and the other one relating the three additional basic fields and the nine additional constitutive fields to the known (and measurable) ones. This identification by the spin axioms is material-independent and does not mix basic spin fields with constitutive properties. The approaches to the Weyssenhoff fluid and the Dirac-electron fluid found in literature are discussed with regard to these spin axioms. The conjecture is formulated, that another reduction from six to three basic spin fields which does not obey the spin axioms introduces special material properties by not allowed mixing of constitutive and basic fields.     

Classical Limit of Expectation Values in a Wave Packet Involving Few Stationary States

Expectation values of physical quantities in a wave packet involving few stationary states in an infinite square well are calculated. Explicit results show that the expectation values in the classical limit go over to the corresponding classical quantity in the form of the arithmetic mean (in mathematical term, the Fejér's average) of the partial Fourier series converging to the classical quantity. The number of the stationary states is that of the partial Fourer series in the Fejér's average. The quantum uncertainty is then demonstrated to have a classical counterpart.     

III-Nitride Quantum Devices—Microphotonics

Photonic devices based on III-nitrides offer benefits such as UV/blue emission, large band offsets of InN/GaN/AlN heterostructures allowing novel quantum well (QW) device design, and inherently high-emission efficiencies. Furthermore, due to their mechanical hardness and larger band gaps (when compared with conventional semiconductor devices), III-nitride-based devices may operate at much higher temperatures and voltages/power levels for any dimensional configuration and in harsher environments than other semiconductor devices and are expected to provide much lower temperature sensitivities. These are crucial advantages for many applications. Over the last decade, the physics of microsize photonic devices has been investigated. New physical phenomena and properties are expected to dominate as the device size scales down. The microsize light emitters offer benefits over edge emitters such as the ability to create arrays of individually controllable pixels on a single chip, enhanced quantum efficiency, and greatly reduced lasing threshold. Rapid progress in the area of III-nitride microphotonics has been made. The growth and fabrication of micron and submicron size photonic structures based on III-nitride wide bandgap semiconductors has been achieved, and the technology has made it possible to integrate arrays of optical elements to form active photonic-integrated devices. One example is an interconnected µ-LED with enhanced emission efficiency over the conventional LEDs for the same device area. Another example is a µ-LED array with independently addressed pixels or III-nitride microdisplay. III-nitride microdisplay may offer performance that is superior to microdisplays fabricated from liquid crystals and organic LEDs. The third example presented is III-nitride UV Focal Plane Arrays (UV-FPA) of detectors. So far, the operation of AlGaN UV-FPA with size up to 256×256 pixels with 30×30?μm² unit cells has been demonstrated. Together with the nature of their two-dimensional array, these active micro-photonic devices show promise in many important applications, such as optical communications, signal and image processing, optical interconnects, computing, enhanced energy conversion and storage, chemical, biohazard substances, and disease detection, missile and shellfire, atmospheric ozone-level, and flame sensing. III-nitride microlens arrays have been fabricated successfully for blue and UV wavelength applications on GaN and AlN. The successful fabrication of microlens arrays based on III-nitride materials opens the possibility for monolithically integrating nitride-based micro-size photonic devices, as well as coupling light into, out of, and between arrays of III-nitride emitters and detectors, especially for short wavelengths covering the green-blue to deep UV (200?nm) region. Nanofabrication and characterization of photonic crystals with diameter/periodicity as small as 100/180?nm on InGaN/GaN MQW has been achieved. An unprecedented maximum enhancement factor of 20 was obtained under optical pumping. Single-mode ridged optical waveguide devices using GaN/AlGaN heterostructures have been designed, fabricated, and characterized for operation in 1550?nm wavelength window. The feasibility of developing novel photonic integrated circuits based on III-nitride wide bandgap semiconductors for fiber-optical communications has been investigated.     

Determination of metal-binding proteins in soft tissues of rock oyster by neutron activation analysis and particle induced X-ray emission

In this work, we determined the levels of trace metals in protein fractions isolated from rock oysters by neutron activation analysis (NAA) and particle induced X-ray emission (PIXE). Proteins were extracted from mantles and hepatopancreases of rock oysters and fractionated by size-exclusion high performance liquid chromatography (HPLC). The protein fractions from mantles and hepatopancreases are found to be abundant in Fe, Cu, Zn, Mn, Pb, and Ag. HPLC profiles of Fe, Cu, Zn, and Ag indicate that those elements are bound to proteins extracted from mantles and hepatopancreases.     

Sugar conjugates of fulvestrant (ICI 182,780): efficient general procedures for glycosylation of the fulvestrant core

We have prepared glucose and cellobiose conjugates at the phenolic 3- and hydroxylic 17-positions of the pure anti-estrogenic compound fulvestrant (ICI 182,780), which has recently been approved in the USA for the treatment of advanced postmenopausal breast cancer. Glycosylation at the 17-position was achieved most effectively using pivaloyl protection of the sugar imidates employed, which we found suppressed the competing transacylation reaction and led to improved yields of the product glycosides.     

Thermal analysis as a tool in the study of GMM in Angra Dos Reis region,Rio de Janeiro,Brazil

Angra dos Reis/Itaguai region of the state of Rio de Janeiro, Brazil, is a very problematic area due to the instability of slope and landslides, due to geological and geomorphological conditions and to the significant and continuous human occupation over favorable areas is prone to the triggering of landslides. The samples were analyzed by thermogravimetry (TG), derivative thermogravimetry (DTG) and differential thermal analysis (DTA). This paper analyzes and characterizes the clay minerals and presence of water, gravitational mass movements’ sites and compares it with sites where gravitational mass movements do not occur. Indeed, this analysis also attempts to verify the presence of minerals.     

Imprinting by hot embossing in polymer substrates using a template of silica glass surface-structured by the ablation of LIBWE method

Laser-induced backside wet etching (LIBWE) of silica glass plates was performed to fabricate an imprinting template for hot embossing in polymer substrates such as polystyrene and silicone resin. Well-defined inverse surface-micropatterns of gratings and grid arrays on the substrates were produced by the hot embossing using a surface-structured silica glass as the template. These results indicate that the LIBWE method allows us to generate robust glass molding tools that exhibit the inverse shapes of the intended microstructures. PACS 52.38.Mf; 68.47.Mn; 81.05.Kf; 81.05.Lg; 83.50.Uv     

ηi-Mode Related Properties of Collisionless Anisotropic Plasmas

An extended eigenvalue problem for collisionless electrostatic driftwaves in cylindrical and slab geometry is discussed and solved in local approximation. The fact of a minimum threshold for the ITG instability (η_i-mode) is used to get a unique concept for profile determination.