Hybrid Curdlan Poly(γ ‐Glutamic Acid) Nanoassembly for Immune Modulation in Macrophage

A nanoformulation composed of curdlan, a linear polysaccharide of 1,3‐β‐linked d ‐glucose units, hydrogen bonded to poly(γ ‐glutamic acid) (PGA), was developed to stimulate macrophage. Curdlan/PGA nanoparticles (C‐NP) are formulated by physically blending curdlan (0.2 mg mL^?1 in 0.4 m NaOH) with PGA (0.8 mg mL^?1). Forster resonance energy transfer (FRET) analysis demonstrates a heterospecies interpolymer complex formed between curdlan and PGA. The ¹H‐NMR spectra display significant peak broadening as well as downfield chemical shifts of the hydroxyl proton resonances of curdlan, indicating potential intermolecular hydrogen bonding interactions. In addition, the cross peaks in ¹H‐¹H 2D‐NOESY suggest intermolecular associations between the OH‐2/OH‐4 hydroxyl groups of curdlan and the carboxylic‐/amide‐groups of PGA via hydrogen bonding. Intracellular uptake of C‐NP occurs over time in human monocyte‐derived macrophage (MDM). Furthermore, C‐NP nanoparticles dose‐dependently increase gene expression for TNF‐α, IL‐6, and IL‐8 at 24 h in MDM. C‐NP nanoparticles also stimulate the release of IL‐lβ, MCP‐1, TNF‐α, IL‐8, IL‐12p70, IL‐17, IL‐18, and IL‐23 from MDM. Overall, this is the first demonstration of a simplistic nanoformulation formed by hydrogen bonding between curdlan and PGA that modulates cytokine gene expression and release of cytokines from MDM.     

Investigation on the stress behavior of cellulose acetate and the development of highly moisture‐resistant optical films for display devices

An optical film with high optical anisotropy was prepared by the stretching of a cellulose acetate film and the consequential orienting of a retardation‐enhancing additive. The change in retardation in response to moisture absorption was explored and it was found that the degree of the retardation variation is strongly related to the stretching temperature. Stress generated by the stretching and its relaxation was systematically investigated to elucidate the effect of stretching temperature on the irreversible change in retardation upon moisture absorption. The results show that the magnitude of releasable stress plays an important role in controlling changes in optical properties. In addition, the difference in the deformation behavior between glassy and rubbery states should be taken into account in the development of a moisture‐resistant optical film. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1470–1478     

Synthesis and characterization of copoly(arylene sulfide)s

Copolymerizations of p-dichlorobenzene (DCB)/4-bromophenyl ether (BPE), DCB/4,4′-dibromobiphenyl (DBB), and DBB/BPE pairs with sodium sulfide under high temperature (270–290°C) utilizing N-methyl-2-pyrrolidinone (NMP) as solvent were carried out to give C(DCB/BPE), C(DCB/DBB), and C(DBB/BPE) copolymers, respectively. The reactivity of dihaloaromatic monomers toward thiolate anion in the polycondensation reaction followed the order DBB > DCB > BPE. The reactivity gap between DBB and DCB toward thiolate anion seemed to be smaller than that between BPE and DCB, resulting in both high yield and high molecular weight in the C(DCB/DBB) copolymers compared to C(DCB/BPE) copolymers. The copolymerization of DBB/BPE pair with sodium sulfide, which has larger reactivity gap than the DCB/DBB or DCB/BPE pair, gave mixtures of PBS and PPSE homopolymers especially in the range of 50–80 mol % BPE in the feed. The C(DCB/DBB) and C(DCB/BPE) copolymers, however, exhibited random copolymer character in all comonomer ratios in the feed as evidenced by copolymer composition and DSC data. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2311–2317, 1999     

Hybrid system of nickel<Emphasis Type="Bold">–</Emphasis>cobalt hydroxide on carbonised natural cellulose materials for supercapacitors

Advanced carbon materials formed from abundant biomass are an exciting and promising class for energy devices due to the clear advantages of low cost, sustainability and good physical and electrochemical properties. However, these materials typically do not compete well with their metal functionalised counterparts. In this work, we demonstrate that xCo(OH)₂–(1?x)Ni(OH)₂ with various Ni:Co ratios can be deposited onto biomass-derived carbon to make a hybrid inorganic-carbon electrode with tuneable physical features and electrochemical performance. These features were tuned by adjusting the Ni:Co ratio within precursor solutions. The electrodes had shown a capacitance ranging from 780.7 to 2041 F g^?1, which is very close to the theoretical value for Ni(OH)₂ (2365 F g^?1). A hypothesis is presented to help explain this performance for a modified, biomass-derived carbon electrode.     

Catholyte‐Free Electrocatalytic CO2 Reduction to Formate

Electrochemical reduction of carbon dioxide (CO₂) into value‐added chemicals is a promising strategy to reduce CO₂ emission and mitigate climate change. One of the most serious problems in electrocatalytic CO₂ reduction (CO₂R) is the low solubility of CO₂ in an aqueous electrolyte, which significantly limits the cathodic reaction rate. This paper proposes a facile method of catholyte‐free electrocatalytic CO₂ reduction to avoid the solubility limitation using commercial tin nanoparticles as a cathode catalyst. Interestingly, as the reaction temperature rises from 303 K to 363 K, the partial current density (PCD) of formate improves more than two times with 52.9 mA cm^?2, despite the decrease in CO₂ solubility. Furthermore, a significantly high formate concentration of 41.5 g L^?1 is obtained as a one‐path product at 343 K with high PCD (51.7 mA cm^?2) and high Faradaic efficiency (93.3 %) via continuous operation in a full flow cell at a low cell voltage of 2.2 V.     

Selective Binding of Open Frameworks Assembled from Nickel(II) Macrocyclic Complexes with Organic and Inorganic Guests

Inclusion studies for metal-organic open-frameworks, [Ni(C_10}H₂₄N₄)(H₂O)₂]₃[BTC]₂·24H₂O (1) and [Ni(C₁₀H₂₆N₆)]₃ [BTC]₂·18H₂O(2) (BTC^3- = 1,3,5-benzenetricarboxylate) with various organic andinorganic guest molecules have been carried out. 1 is the previously reportedmolecular floral lace with 1-D channels, where positively charged macrocyclic layersand negatively charged BTC^3- layers are alternately packed by hydrogen bondinginteractions. 2 is assembled in this study from nickel(II) hexaazamacrocyclic complexcontaining methyl pendant arms and BTC^3-. The X-ray structure of 2 shows thatthe nickel(II) complex and BTC^3- form a 2-D coordination polymer. The XRPD patternsof 2 indicate that framework of 2 is slightly deformed upon removal of waterguest molecules but restored upon rebinding of water. The host solid 1 binds MeOHin toluene, and 1,3,5-trihydroxybenzene (THB) and 4-hydroxyacetophenone (HAP) in EtOH/toluene (v/v = 1/4) solutions. The binding constants (K_f) of 1 forMeOH, THB, and HAP are 66.4 M^-1, 259 M^-1, and 13.9 M^-1,respectively. In the range of high concentration of the guest, however, the host showsvarious binding curves depending upon the types of guest. It binds PhOH in toluene,showing a sigmoid curve. It also binds transition metal complexes such as[Cu(NH₃)₄](ClO₄)₂, [Cu(ethylenediamine)₂](ClO₄)₂,[Cu(histamine)₂](ClO₄)₂, and[Cu(N,N'-bis(3-aminopropyl)ethylenediamine)](ClO₄)₂ in MeCN, with K_f values of 645 M^-1, 9.52 M^-1, 37.2 M^-1, and 6.00 M^-1,respectively. The host solid 2 binds selectively PhOH over PhCl and PhBr, showing that hydrogen bonding interaction between the host and guest plays an important role in the selectivity.     

Comparison of analytical methods for ozone precursors using adsorption tube and canister

Recently, ozone concentrations have increased dramatically as a result of vehicle usage in metropolitan areas. Ozone precursors are composed of hydrocarbons of organic compounds. Because hydrocarbons are indicative of ozone formation, they need to be monitored in ambient air. Since ozone precursor are present at very low levels (from ppb to ppt) in ambient air, they are difficult to analyze accurately. This study investigates ozone precursors in ambient air. The main purpose of this study is to compare analytical methods for the measurement of ozone precursors in atmosphere. Two measurement methods were evaluated using canister (Silco-canister) and adsorbent (300-mg Carbopack B+150-mg Carbosieve SIII) tube. Differences in measurements for total ozone precursor emissions were 54.1% between the adsorption tube and canister-GC/MS, 51.1% between adsorption tube and canister-GC/FID, and 16.3% between canister-GC/MS and canister-GC/FID.     

The effect of the curing agent content on the curing and liquid‐crystalline phase of liquid‐crystalline epoxy resin

The effect of the curing agent content on the curing behavior and liquid‐crystalline (LC) phase of the liquid‐crystalline epoxy (LCE) resin 4,4′‐di(2,3‐epoxypropyloxy)phenyl benzoate was studied. Diaminodiphenylester (DDE) was used as a curing agent. The curing behavior was observed via differential scanning calorimetry, and the LC phase was investigated with a polarized optical microscopy. The LC phase in the LCE/DDE mixture with a high DDE content was developed during curing. The onset time was inversely proportional to the DDE content. The mesophase stability of LCE/DDE was enhanced by the addition of large amounts of DDE. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 374–379, 2001