Preparation and characterization of cotton fabrics with antibacterial properties treated by crosslinkable benzophenone derivative in choline chloride-based deep eutectic solvents

Cotton fabrics with antibacterial properties were prepared by the treatment with 3,3′4,4′-benzophenone tetracarboxylic dianhydride (BPTCD) in a combined process of shaking immersion in dyeing machine and pad-dry-cure. Environmentally-benign choline chloride (ChCl)-based deep eutectic solvents (DESs) were mainly examined as treatment media instead of using organic solvent. The results revealed that cotton fabrics treated with BPTCD in urea-ChCl DES showed a strong ester carbonyl peak in fourier transform infrared (FTIR) analysis, indicating fixation of BPTCD on cotton cellulose. Detailed characterizations of the BPTCD-treated cotton were carried out by FTIR, thermogravimetric analysis, scanning electron microscopy, dye staining, and evaluation of hydrophilicity and strength. The treated fabrics demonstrated a high level of antibacterial characteristics before and after UV irradiation. This indicated that addition of ChCl could enhance antibacterial activity of cotton before UV irradiation. Therefore, use of ChCl-based DES along with BPTCD incorporation provided environmentally-acceptable and economically-feasible treatment process for preparation of novel antibacterial cotton.     

Total synthesis of methyl l-daunosaminide hydrochloride via chiral 1,3-oxazine

Total synthesis of methyl l-daunosaminide hydrochloride was achieved from readily available l-tyrosine. Key steps in this strategy were palladium(0) catalyzed stereoselective intramolecular oxazine formation and catalytic hydrogenation of oxazine intermediate. This paper reported ¹H and ¹³C NMR data of α- and β-anomer of methyl l-daunosaminide hydrochloride.     

Synthesis and biological evaluation of 5′-O-dicarboxylic fatty acyl monoester derivatives of anti-HIV nucleoside reverse transcriptase inhibitors

A number of 5′-O-dicarboxylic fatty acyl monoester derivatives of 3′-azido-3′-deoxythymidine (zidovudine, AZT), 2′,3′-didehydro-2′,3′-dideoxythymidine (stavudine, d4T), and 3′-fluoro-3′-deoxythymidine (alovudine, FLT) were synthesized to improve the lipophilicity and potentially the cellular delivery of parent polar 2′,3′-dideoxynucleoside (ddN) analogs. The compounds were evaluated for their anti-HIV activity. Three different fatty acids with varying chain length of suberic acid (octanedioic acid), sebacic acid (decanedioic acid), and dodecanedioic acid were used for the conjugation with the nucleosides. The compounds were evaluated for anti-HIV activity and cytotoxicity. All dicarboxylic ester conjugates of nucleosides exhibited significantly higher anti-HIV activity than that of the corresponding parent nucleoside analogs. Among all the tested conjugates, 5′-O-suberate derivative of AZT (EC₅₀ = 0.10 nM) was found to be the most potent compound and showed 80-fold higher anti-HIV activity than AZT without any significant toxicity (TC₅₀ >500 nM).     

Synthesis of tris(β,β,γ-oximinoalkyl)amines from aliphatic nitro compounds and methyl vinyl ketone

A general strategy for the assembly of previously unknown tris(β,β,γ-oximinoalkyl)amines from aliphatic nitro compounds and methyl vinyl ketone is described. The strategy involves N,N-bis(siloxy)enamines as key intermediates. The latter are accessible by double silylation of alkylnitro compounds. Nickel(II) and copper(II) complexes of tris(β,β,γ-oximinoalkyl)amines are prepared and structurally characterized.     

Ultra‐trace level determination of diquat and paraquat residues in surface and drinking water using ion‐pair liquid chromatography with tandem mass spectrometry: A comparison of direct injection and solid‐phase extraction methods

Direct injection and solid‐phase extraction methods for the determination of diquat and paraquat in surface and drinking water were developed using liquid chromatography with tandem mass spectrometry. The signal intensities of analytes based on six ion‐pairing reagents were compared with each other, and 12.5 mM nonafluoropentanoic acid was selected as the best suited amongst them. A clean‐up method was developed using Oasis hydrophilic–lipophilic balance; this was compared to the direct injection method, with respect to limits of detection, interference, precision, and accuracy. Limits of quantification of diquat and paraquat were 0.03 and 0.01 μg/L using the direct injection method, and 0.002 and 0.001 μg/L using the hydrophilic–lipophilic balance method. When the hydrophilic–lipophilic balance method was used to analyze target compounds in 114 surface water and 30 drinking water samples, paraquat and diquat were detected within a concentration range of 0.001–0.12 and 0.002–0.038 μg/L in surface water, respectively. When the direct injection method was used to analyze target compounds in the same samples, the detected concentrations of paraquat and diquat were within 25% in samples being >0.015 μg/L using the hydrophilic–lipophilic balance method. The liquid chromatography with tandem mass spectrometry method using direct injection can thus be used for routine monitoring of paraquat and diquat in surface and drinking water.     

Injectable,Interconnected, High‐Porosity Macroporous Biocompatible Gelatin Scaffolds Made by Surfactant‐Free Emulsion Templating

High‐porosity interconnected, thermoresponsive macroporous hydrogels are prepared from oil‐in‐water high internal phase emulsions (HIPEs) stabilized by gelatin‐graft‐poly(N‐isopropylacrylamide). PolyHIPEs are obtained by gelling HIPEs utilizing the thermoresponsiveness of the copolymer components. PolyHIPEs properties can be controlled by varying the aqueous phase composition, internal phase volume ratio, and gelation temperature. PolyHIPEs respond to temperature changes experienced during cell seeding, allowing fibroblasts to spread, proliferate, and penetrate into the scaffold. Encapsulated cells survive ejection of cell‐laden hydrogels through a hypodermic needle. This system provides a new strategy for the fabrication of safe injectable biocompatible tissue engineering scaffolds.

     

Dual Sulfide–Disulfide Crosslinked Networks with Rapid and Room Temperature Self‐Healability

Polymer‐based crosslinked networks with intrinsic self‐repairing ability have emerged due to their built‐in ability to repair physical damages. Here, novel dual sulfide–disulfide crosslinked networks (s‐ssPxNs) are reported exhibiting rapid and room temperature self‐healability within seconds to minutes, with no extra healing agents and no change under any environmental conditions. The method to synthesize these self‐healable networks utilizes a combination of well‐known crosslinking chemistry: photoinduced thiol‐ene click‐type radical addition, generating lightly sulfide‐crosslinked polysulfide‐based networks with excess thiols, and their oxidation, creating dynamic disulfide crosslinkages to yield the dual s‐ssPxNs. The resulting s‐ssPxN networks show rapid self‐healing within 30 s to 30 min at room temperature, as well as self‐healing elasticity with reversible viscoelastic properties. These results, combined with tunable self‐healing kinetics, demonstrate the versatility of the method as a new means to synthesize smart multifunctional polymeric materials.

     

Enhanced Static Modulated Fourier Transform Spectrometer for Fast Approximation in Field Application

We discuss the data sampling frequency, the spectral resolution, and the limit for non-aliasing in the static modulated Fourier transform spectrometer based on a modified Sagnac interferometer. The measurement was performed in a very short 4 ms, which is applicable for real time field operation. The improved spectrometer characteristics were used to investigate the spectral properties of an InGaAs light emitting diode. In addition, The measured spectral peak was shifted from 6420 cm⁻¹ to 6365 cm⁻¹, as the temperature increased from 25 °C to 40 °C, when the operating current is fixed to be 0.55 A. As the applied current increased from 0.30 A to 0.55 A at room temperature, the spectral width was broadened from 316 cm⁻¹ to 384 cm⁻¹. Compared to the conventional Fourier transform spectrometer, the measured spectral width by the static modulated Fourier transform spectrometer showed a deviation less than 10%, and the spectral peak shift according to the temperature rise showed a difference within 2%.