Variation of mechanical and thermal properties of the thermoplastics reinforced with natural fibers by electron beam processing

With restrictions for environmental protection being strengthened, the thermoplastics reinforced with natural fibers (NFs) such as jute, kenaf, flax, etc., appeared as an automobile interior material instead of the chemical plastics. Regardless of many advantages, one shortcoming is the deformation after being formed in high temperature of about 200 °C, caused by the poor adhesion between the natural fibers and thermoplastics. Also, the energy saving in connection with car air-conditioning becomes very important. In this study, the thermal conductivity, tensile strength, and deformation of several kinds of thermoplastic composites composing of 50% polypropylene (PP) and 50% natural fiber irradiated by the electron beam (energy: 0.5 MeV, dose: 0–20 kGy) were measured. The length and thickness of PP and NF are 80±10 mm and 40–120 μm, respectively. The results show that the thermal conductivity and the tensile strength changed and became minimum when the dose of electron beam is 10 kGy, and the deformation after the thermal cycle were reduced by the electron beam.     

Ionic liquids as modulators of the critical micelle concentration of sodium dodecyl sulfate

Critical micelle concentration (CMC) of sodium dodecyl sulfate (SDS), an anionic surfactant, has been investigated in aqueous solutions of a variety of room temperature ionic liquids (RTILs): 1,3-dimethylimidazolium iodide (Me2IM-I, 2), 1-butyl-3-methylimidazolium chloride (BMIM-Cl, 3), 1-hexyl-3-methylimidazolium chloride (HxMIM-Cl, 4), 1-methyl-3-octylimidazolium chloride (MOIM-Cl), 5, and 1-methyl-3-octylimidazolium tetrafluoroborate (MOIM-BF4, 6). The CMC of SDS is shown to correlate with the nature of the alkyl groups in the RTILs; SDS showed appreciably higher CMCs in presence of ionic liquids 2 and 3, whereas in the presence of ionic liquids 4, 5, and 6 much smaller CMCs were observed. The nature of the gigenions, Cl- or BF4-, has no noticeable effect on the observed CMC values.     

Symmetric quiver Hecke algebras and <Emphasis Type="Italic">R</Emphasis>-matrices of quantum affine algebras IV

Let \(U'_q(\mathfrak {g})\) be a twisted affine quantum group of type \(A_{N}^{(2)}\) or \(D_{N}^{(2)}\) and let \(\mathfrak {g}_{0}\) be the finite-dimensional simple Lie algebra of type \(A_{N}\) or \(D_{N}\). For a Dynkin quiver of type \(\mathfrak {g}_{0}\), we define a full subcategory \({\mathcal C}_{Q}^{(2)}\) of the category of finite-dimensional integrable \(U'_q(\mathfrak {g})\)-modules, a twisted version of the category \({\mathcal C}^{(1)}_{Q}\) introduced by Hernandez and Leclerc. Applying the general scheme of affine Schur–Weyl duality, we construct an exact faithful KLR-type duality functor \({\mathcal F}_{Q}^{(2)}:\mathrm{Rep}(R) \rightarrow {\mathcal C}_{Q}^{(2)}\), where \(\mathrm{Rep}(R)\) is the category of finite-dimensional modules over the quiver Hecke algebra R of type \(\mathfrak {g}_{0}\) with nilpotent actions of the generators \(x_k\). We show that \({\mathcal F}_{Q}^{(2)}\) sends any simple object to a simple object and induces a ring isomorphism Open image in new window .     

A Data-Adaptive Principal Component Analysis: Use of Composite Asymmetric Huber Function

This article considers a new type of principal component analysis (PCA) that adaptively reflects the information of data. The ordinary PCA is useful for dimension reduction and identifying important features of multivariate data. However, it uses the second moment of data only, and consequently, it is not efficient for analyzing real observations in the case that these are skewed or asymmetric data. To extend the scope of PCA to non-Gaussian distributed data that cannot be well represented by the second moment, a new approach for PCA is proposed. The core of the methodology is to use a composite asymmetric Huber function defined as a weighted linear combination of modified Huber loss functions, which replaces the conventional square loss function. A practical algorithm to implement the data-adaptive PCA is discussed. Results from numerical studies including simulation study and real data analysis demonstrate the promising empirical properties of the proposed approach. Supplementary materials for this article are available online.     

Spontaneous Formation of an Air‐Stable Radical upon the Direct Fusion of Diphenylmethane to a Triarylporphyrin

The direct fusion of a diphenylmethane segment to a Ni^II 5,10,15‐triarylporphyrin with three linkages furnished an air‐ and moisture‐stable neutral radical through unexpected and spontaneous oxidation. This radical was demetalated by treatment with H₂SO₄ and CF₃CO₂H to provide the corresponding free‐base radical. These porphyrin radicals are very stable owing to spin delocalization and have been fully characterized through UV/Vis/NIR absorption spectroscopy, X‐ray crystallographic analysis, magnetic susceptibility measurements, electrochemical studies, laser‐based ultrafast spectroscopic studies, and theoretical calculations. They were chemically oxidized and reduced to the corresponding cation and anion but did not react with hydrogen‐atom donors.     

Reduction of radiated exterior noise from the flexible vibrating plate of a rectangular enclosure using multi-channel active control

This study attempted to control the radiated exterior noise from a rectangular enclosure in which an internal plate vibrates by acoustic excitation and noise is thus radiated from that plate. Multi-channel active control was applied to reduce the vibration and external radiation of this enclosed plate. A piezoelectric ceramic was used as a distributed actuator for multiple mode control of the vibration and radiated noise in the acoustically excited plate. To maximize the effective control, an approach was proposed for attachment the piezoelectric actuator in the optimal location. The plate and internal acoustic space in the enclosure are coupled with each other. This will change dominant frequency characteristics of the plate and, thus, those of the externally radiated noise. Active noise control was accomplished using an accelerometer attached to the plate and a microphone placed adjacent to that plate as an error sensor under acoustic excitation of sine wave and white noise. It was found that the control of radiated external radiation noise requires a microphone as an error sensor, a sound pressure sensor due to vibration of the plate, differences in the dominant frequency of externally radiated noise, and complex vibration modes of the plate.