Effects of pH and Dye Concentration on the Optical and Structural Properties of Coumarin-4 Dye-Doped SiO2-PDMS Xerogels

Optical and structural properties of coumarin-4 dye-doped SiO₂-PDMS xerogels synthesized by acid catalyzed (one-step) and acid-base catalyzed (two-step) sol-gel routes with varying pH (0.6 to 7) and dye content ( 5 × 10^–4 to 5 × 10^–2 mole) are reported. Spectroscopic methods such as photo-luminescence, FT-IR and FT-Raman were used for characterizations. The acid catalyzed xerogels prepared with pH < 2.5 exhibited two fluorescence peaks, I at 390 nm and II at 480 nm. The acid-base catalyzed xerogels synthesized with pH < 2.5 also exhibited two peaks, I at 400 nm and II at 475 nm. Peak II was not observed for the samples with pH 2.5. This phenomenon was attributed to the existence of pH dependent different forms of coumarin-4 molecule. The concentration-quenching phenomenon was observed for the acid catalyzed xerogels prepared with different dye concentration. TheFT-IR spectra indicated the existence of hydrogen bonds between the carbonyl groups of dye molecules and the silanol groups of gel matrix. The hydrogen bonding was the highest for the samples with the extremity pH, 0.6 and 7, resulting in the highest dye/gel matrix interactions, hence, the highest fluorescence peaks. The Raman studies indicated that the samples prepared with pH < 2.5 possessed relatively more number of 3-membered siloxane rings than 4-membered siloxane rings. The ring statistics was reversed for the samples with pH > 2.5. The number of silanol groups was higher for the samples with pH > 2.5.     

Characterization of n-butyl acrylate centered triads in poly(n-butyl acrylate-co-carbon monoxide-co-ethylene) by isotopic labeling and two dimensional NMR

Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. Electronic Supplementary Material: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.     

A facile synthesis of polypyrrole nanotubes using a template-mediated vapor deposition polymerization and the conversion to carbon nanotubes

Polypyrrole (PPy) nanotubes with highly uniform surface and tunable wall thickness were fabricated by one-step vapor deposition polymerization (VDP) using anodic aluminium oxide (AAO) template membranes, and transformed into carbon nanotubes through a carbonization process.     

Sequence- and site-specific photodissociation at 266 nm of protonated synthetic polypeptides containing a tryptophanyl residue

Photodissociation at 266 nm of protonated synthetic polypeptides containing a tryptophanyl residue was investigated using a homebuilt tandem time-of-flight mass spectrometer equipped with a matrix-assisted laser desorption/ionization source. Efficient photodissociation of the protonated peptides was demonstrated. Most of the intense peaks in the laser-induced tandem mass spectra were sequence ions. Furthermore, sequence ions due to cleavages at all the peptide bonds were observed; this is a feature of the technique that is particularly useful for peptide sequencing. Fragmentations at both ends of the tryptophanyl residue were especially prevalent, which can be useful for location of the tryptophanyl chromophore in a peptide.     

Sphingosine mediates FTY720-induced apoptosis in LLC-PK1 cells

FTY720, a synthetic sphingoid base analog, was examined as a new sphingosine kinase inhibitor, which converts endogenous sphingosine into its phosphate form. With 20 microM of FTY720, sphingosine accumulated in the LLC-PK(1) cells in a time- and dose-dependent manner. The FTY720 treated cells showed a high concentration of fragmented DNA, a high caspase-3 like activity and TUNEL staining cells. It was also found that the sphingosine and sphinganine level increased in a time- and dose-dependent manner within 12 h after the FTY720 treatment. The sphingosine kinase activity was reduced by FTY720 as much as other sphingosine kinase inhibitors, N, N-dimethylsphingosine (DMS), dl-threo-dihydrosphingosine (DHS). The fragmented DNA content as a result of the 20 microM of FTY720 treatment and by 5 microM of the exogenously added BSA-sphingosine complex indicated typical apoptosis. Under similar conditions, the accumulated sphingosine concentration in all the cells was almost identical even though the sphingosine distribution inside the cells was somewhat different. These results indicate that the FTY720 induced apoptosis is associated with the inhibition of the sphingosine kinase activity and is strongly associated with the successive accumulation of sphingosine.     

Multivariate Analysis of Electron Detachment Dissociation and Infrared Multiphoton Dissociation Mass Spectra of Heparan Sulfate Tetrasaccharides Differing Only in Hexuronic acid Stereochemistry

The structural characterization of glycosaminoglycan (GAG) carbohydrates by mass spectrometry has been a long-standing analytical challenge due to the inherent heterogeneity of these biomolecules, specifically polydispersity, variability in sulfation, and hexuronic acid stereochemistry. Recent advances in tandem mass spectrometry methods employing threshold and electron-based ion activation have resulted in the ability to determine the location of the labile sulfate modification as well as assign the stereochemistry of hexuronic acid residues. To facilitate the analysis of complex electron detachment dissociation (EDD) spectra, principal component analysis (PCA) is employed to differentiate the hexuronic acid stereochemistry of four synthetic GAG epimers whose EDD spectra are nearly identical upon visual inspection. For comparison, PCA is also applied to infrared multiphoton dissociation spectra (IRMPD) of the examined epimers. To assess the applicability of multivariate methods in GAG mixture analysis, PCA is utilized to identify the relative content of two epimers in a binary mixture.     

Hydrodechlorination of chlorophenols over Pd catalysts supported on zeolite Y,MCM-41 and graphene

Hydrodechlorination (HDC) reaction of chlorophenols was carried out using Pd catalysts supported over zeolite Y, MCM-41 or graphene. Pd-MCM-41 and Pd-Y zeolite were prepared by impregnation and ion-exchange method, respectively. Pd-graphene (Pd-G) was prepared by hydrazine hydrate reduction of palladium ion dispersed on graphene oxide. The catalysts were characterized by several analytical tools such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). These catalysts were subjected to HDC reaction of chlorophenols, such as 4-chlorophenol (4-CP), 2,4-dichlorophenol (2,4-DCP), 2,6-dichlorophenol (2,6-DCP) and 3,4-dichlorophenol (3,4-DCP). The reaction rate of HDC of chlorophenols catalyzed by Pd catalysts with various solid bases, such as KF/Al₂O₃ (alumina), sodium acetate (NaOAc) and K₂CO₃ was compared. First, Pd-MCM-41 and Pd-Y catalysts were compared. 2,4- and 3,4-DCPs were completely decomposed within 6 h, in the case of Pd-MCM-41 with NaOAc. Using Pd-Y instead of Pd-MCM-41 with NaOAc, much faster decomposition was observed. Faster decomposition of 4-CP and DCPs was observed with NaOAc base than K₂CO₃ or KF/Al₂O₃ under the same condition. In the case of Pd-Y with KF/Al₂O₃, slower decomposition of 4-CP and DCPs was observed. These base effects were interpreted using the solubility of NaCl and KCl in alcohol and the basic sites of KF/Al₂O₃. Because the solubility of NaCl is known to be larger than KCl solubility in alcohol, byproduct NaCl could be easily dissolved and ionized in solvents. For Pd-Y with KF/Al₂O₃, the small pore size of Y zeolite can interfere with the diffusion of HCl to KF/Al₂O₃ basic site. Second, three catalysts, including Pd-graphene, were compared. 2,4-DCP was decomposed within 2 h using Pd-G with either K₂CO₃, NaOAc or KF/Al₂O₃. Pd-G catalyst showed the highest catalytic activity among Pd-G, Pd-MCM-41 and Pd-Y catalysts. The high activity and stability of the Pd-G could be attributed to the strong metal–support interaction with an electron-deficient site and a critical Pd particle size (ca. 3.5 nm) of Pd-G nanocatalyst with a stronger resistance to the deactivation and good affinity toward aromatic organic molecules, especially phenols. The progress of HDC reaction was monitored by gas chromatography with flame ionization detection (GC/FID), and a feasible degradation process could be explained by analyzing the degradation products such as phenol, cyclohexanone and cyclohexanol from resulting GC chromatograms. The effect of reaction temperature on HDC in Pd-G catalyst was also discussed. In conclusion, Pd-G is an efficient catalyst for decomposition of chlorophenols and can be applied to remediation of chlorophenol-contaminated water under mild conditions.     

Control of on-off or off-on fluorescent and optical [Cu²⁺] and [Hg²⁺] responses via formal Me/H substitution in fully characterized thienyl "scorpionate"-like BODIPY systems

One 8-phenyl and two 8-mesityl-substituted "scorpionate"-like BODIPY-type species of the formula [3,4,4-tris(5-R-(2-thienyl))-8-(2,4,6-R'-phenyl)-4-bora-3a,4a-diaza-s-indacene (R = H, R' = H, 3a; R, = H, R' = Me, 2a; R, = Me, R' = Me, 2b)] have been synthesized and fully characterized. Importantly, differences in their solution (MeCN) optical Cu(2+) and Hg(2+) probing capacity via SSS-chelation were investigated. Compounds 2a-3a were prepared from the requisite 8-substituted BODIPY complexes. They were characterized first by complete (1)H, (11)B and (13)C NMR spectroscopic assignments (CD(3)Cl or CD(3)C(O)CD(3)); the molecular structures of 2a and 3a were determined by X-ray crystallography. Compounds 2a-3a were studied by UV-vis and fluorescence spectroscopy [Φ(F) = 0.27 ± 0.013 (2a); 0.024 ± 0.0016 (2b); 0.0034 ± 0.00047 (3a)]. Importantly, low [Cu(2+)] with 3a (<3.0 × 10(-5) M) gave rise to an increase of fluorescence intensity (off-on; 6.3-fold), whereas with 2a it decreased (on-off). When [Hg(2+)] (<3.0 × 10(-5) M) was added to 2b, the λ(em,max) value increased (off-on; 3.2-fold), and for 2a, it decreased (on-off). The association constant (K(a)) for Hg(2+)·2a was determined to be 3120 ± 307 M(-1). An approximate stoichiometric 1:1 binding determined by Job plot analysis is in line with successful DFT modeling of SSS-Cu(2+) binding for this system type. (1)H NMR spectroscopy also revealed tentative sets of product complex peaks. These simple differences caused by formal ligand Me-group incorporation are the first for any related fluorophores, to the best of our knowledge.     

Antioxidant encapsulated porous poly(lactide-co-glycolide) microparticles for developing long acting inhalation system

The purpose of this study was to fabricate porous poly(lactide-co-glycolide) (PLGA) microparticles for efficient pulmonary deposition and increased therapeutic duration of the antioxidant anthocyanin (ATH). These microparticles were prepared by a water-in-oil-in-water (W(1)/O/W(2)) multi-emulsion method with vaporizing ammonium bicarbonate (AB) as a porogen and starch as a viscous additive. High porosity achieved by the decomposition reaction of AB to the base of ammonia, carbon dioxide, and water vapor at 50°C enabled efficient deposition of ATH throughout the entire lung in BALB/c mice. In addition, the porous microparticles incorporating starch showed sustained ATH release characteristics (up to 5 days) and protracted antioxidant activity (up to 5 days) for 2,2-diphenyl-1-pikryl-hydrazyl (DPPH) radicals, which was comparable to that of the porous microparticles without starch which completely released ATH in 2h. Furthermore, these porous microparticles incorporating starch led to longer ATH residence (up to 20 days) in in vivo lung epithelium. We believe that this system has great pharmaceutical potential as a long-acting antioxidant for continuously relieving oxidative stress in pulmonary diseases like chronic obstructive pulmonary disease (COPD).