An electrochemical signal switch–based (on–off) aptasensor for sensitive detection of insulin on gold-deposited screen-printed electrodes

Journal of Solid State Electrochemistry - Insulin hormone is of great importance for many diseases, especially for diabetes management. Therefore, different detection strategies have been used for...     

Stock optimization for service differentiated demands with fill rate and waiting time requirements

We develop a computationally efficient optimization procedure to optimize stock and rationing levels for a model consisting of a single product with two priority–demand classes, given by mutually independent, stationary, Poisson demand processes. Each priority class has its own service levels requirements, defined by the class-specific fill rate and expected waiting-time levels. Order lead times are independent and identically distributed random variables. This is the first study in this setting to consider both waiting-time constraints along with fill rate requirements.     

Electronic properties of (2 x 1) and c(4 x 2) domains on Ge(001) studied by scanning tunneling spectroscopy

The surface electronic structure of Ge(001) was studied by scanning tunneling spectroscopy. The measured surface densities of states unequivocally reveal the presence of a metallic state on the (2 x 1) domains, which is absent on the c(4 x 2) domains. This metallic state, so far observed only in integral measurements, is attributed to the flip-flopping dimers that constitute the (2 x 1) domains. Our data also reveal a set of previously unresolved surface states, in perfect agreement with published theoretical predictions.     

Hydrothermal in situ preparation of phthalocyanine–TiO2 nanocomposites for photocatalytic activity under visible light irradiation

Research on Chemical Intermediates - In this study, phthalocyanine (Pc)–TiO2 nanocomposites were prepared via in situ hydrothermal method. The metal-free, zinc(II), cobalt(II), nickel(II) and...     

Quantum confinement between self-organized Pt nanowires on Ge(001)

The existence of one-dimensional (1D) electronic states between self-organized Pt nanowires spaced 1.6 or 2.4 nm apart on a Ge(001) surface is revealed by low-temperature scanning tunneling microscopy. These perfectly straight Pt nanowires act as barriers for a surface state (located just below the Fermi level) of the underlying terrace. The energy positions of the 1D electronic states are in good agreement with the energy levels of a quantum particle in a well. Spatial maps of the differential conductivity of the 1D electronic states conclusively reveal that these states are exclusively present in the troughs between the Pt nanowires.     

Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane–urea–silica nanocomposites

Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)‐based polyurethane–urea copolymer matrix at a concentration of 10 wt % (4.4 vol %) in order to investigate the effect of their surface chemistry on the structure–property behavior of the resulting nanocomposites. The rigid amorphous fraction (RAF) of the nanocomposite matrix as determined by differential scanning calorimetry and dynamic mechanical analysis was confirmed to vary significantly with the surface chemistry of the NPs and to be strongly correlated with the bulk mechanical properties in simple tension. Hence, nanocomposites with an RAF of about 30 wt % showed a 120% increase in Young's modulus, a 25% increase in tensile strength, a 15% decrease in elongation at break with respect to the neat matrix, which had no detectable RAF, whereas nanocomposites with an RAF of less than 5% showed a 60% increase in Young's modulus, a 10% increase in tensile strength and a 5% decrease in the elongation at break. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2543–2556     

A new near‐infrared switchable electrochromic polymer and its device application

A new near‐infrared switchable electrochromic polymer containing carbazole pendant (poly‐SNSC), synthesized by electrochemical polymerization of 2,5‐bis‐dithienyl‐1H‐pyrrole (SNS) main chain, has been prepared. The electrochemical and optical properties of SNSC monomer and its polymer have been investigated. Because of having two different electro‐donor moieties; that is, carbazole and SNS, SNSC gave two separate electrochemical oxidation and also light brown color of the film in the neutral state turn into gray on oxidation. An electrochromic device, contructed in the sandwich configuration [indium tin oxide (ITO)‐coated glass/anodically coloring polymer (poly‐SNSC)//gel electrolyte//cathodically coloring polymer (PEDOT)/ITO‐coated glass] and exhibited a high coloration efficiency (1216 cm² C^–1), a very short response time (about 0.3 s), low driving voltage, and a high redox stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Modelling,simulation, animation,and real-time control (MoSART) for a class of electromechanical systems: a system-theoretic approach

This paper describes an interactive modelling, simulation, animation, and real-time control (MoSART) environment for a class of ‘cart-pendulum’ electromechanical systems that may be used to enhance learning within differential equations and linear algebra classes. The environment is useful for conveying fundamental mathematical/systems concepts through computer-aided analysis, design, graphical visualization, and 3D animation. Referred to as Cart-Pendulum Control3D-Lab1Control3D-Lab-short for control 3D animation laboratory. The author to whom correspondence should be addressed., the environment is based on Microsoft Windows/Visual C++/Direct-3D and MATLAB/Simulink2MATLAB and Simulant are trademarks of The Masterworks, Inc.. Pull-down menus provide access to systems/models/control laws, exogenous signals, parameters, animation models and visual indicators, a suite of (easy-to-modify) Simulant diagrams containing models and control laws, MATLAB m-files for detailed analysis and design, and detailed documentation for each of the above. Three blocks enable animation, joystick inputs, and real-time animation within Simulant. Examples are presented to illustrate the utility of the environment as a valuable tool for analysing/visualizing the above class of electromechanical systems and for enhancing mathematics instruction.     

Optimal Breast Biopsy Decision-Making Based on Mammographic Features and Demographic Factors

Breast cancer is the most common non-skin cancer affecting women in the United States, where every year more than 20 million mammograms are performed. Breast biopsy is commonly performed on the suspicious findings on mammograms to confirm the presence of cancer. Currently, 700,000 biopsies are performed annually in the U.S.; 55%-85% of these biopsies ultimately are found to be benign breast lesions, resulting in unnecessary treatments, patient anxiety, and expenditures. This paper addresses the decision problem faced by radiologists: When should a woman be sent for biopsy based on her mammographic features and demographic factors? This problem is formulated as a finite-horizon discrete-time Markov decision process. The optimal policy of our model shows that the decision to biopsy should take the age of patient into account; particularly, an older patient's risk threshold for biopsy should be higher than that of a younger patient. When applied to the clinical data, our model outperforms radiologists in the biopsy decision-making problem. This study also derives structural properties of the model, including sufficiency conditions that ensure the existence of a control-limit type policy and nondecreasing control-limits with age.     

Holographic pixel super-resolution in portable lensless on-chip microscopy using a fiber-optic array

We report a portable lensless on-chip microscope that can achieve <1 μm resolution over a wide field-of-view of ～ 24 mm(2) without the use of any mechanical scanning. This compact on-chip microscope weighs ～ 95 g and is based on partially coherent digital in-line holography. Multiple fiber-optic waveguides are butt-coupled to light emitting diodes, which are controlled by a low-cost micro-controller to sequentially illuminate the sample. The resulting lensfree holograms are then captured by a digital sensor-array and are rapidly processed using a pixel super-resolution algorithm to generate much higher resolution holographic images (both phase and amplitude) of the objects. This wide-field and high-resolution on-chip microscope, being compact and light-weight, would be important for global health problems such as diagnosis of infectious diseases in remote locations. Toward this end, we validate the performance of this field-portable microscope by imaging human malaria parasites (Plasmodium falciparum) in thin blood smears. Our results constitute the first-time that a lensfree on-chip microscope has successfully imaged malaria parasites.