A direct electrochemical route to construct a polymer/manganese oxide layered structure

A layered nanocomposite with poly(diallyldimethylammonium), PDDA, intercalated between manganese oxide layers can be formed on a platinum electrode in a thin film form through a direct electrochemical route. The process involves a potentiostatic oxidation of aqueous Mn(2+) precursors in the presence of PDDA by applying a constant potential (+1.0 V vs Ag/AgCl).     

Characterization of preformed plasmas with an interferometer for ultra-short high-intensity laser-plasma interactions

The evolution of an Al preformed plasma produced by a prepulse was observed before and after the arrival of the main pulse by an interferometer using a femtosecond probe pulse. A central density depression due to the ponderomotive force of the main laser pulse in the preformed plasma with a 100 m scale length was clearly visible after the main pulse irradiation at an intensity of 5×10¹⁶ W/cm². The temporal profiles of the prepulse, characterized by a cross-correlation in conjunction with a precise density profile measurement by an interferometer, contribute to the better understanding of femtosecond laser-matter interactions. PACS 52.38.-r; 52.50.Jm; 52.70.-m     

Towards Realization of a Micro- and Mesoporous Composite Silicate Catalyst

A composite silicate material, which possesses the characteristics of both microporous zeolite and mesoporous silica materials, is developed by top–down and bottom–up synthesis techniques. In order to realize a micro- and mesoporous composite material, several essential points must be clarified, since each porous material is synthesized under very different metastable conditions: zeolite is a silicate crystal, while the wall of mesoporous material is composed of amorphous silicate. Here, some aspects of the realization of a micro- and mesocomposite porous material are described, as are our experimental results regarding the successful production of composite catalyst.     

Direct patterning of poly(amic acid) and low‐temperature imidization using a crosslinker,a photoacid generator,and a thermobase generator

A positive‐type photosensitive polyimide (PSPI) based on poly(amic acid) (PAA), a crosslinker 1,1,1‐tris{4‐[2‐(vinyloxy)ethoxy]phenyl}ethane (TVPE), a photoacid generator (PAG) (5‐propylsulfonyloxyimino‐5H‐thiophen‐2‐ylidene)‐2‐(methylphenyl)acetonitrile (PTMA), and a thermobase generator (TBG) t‐butyl 2,6‐dimethylpiperidine‐1‐carboxylate (BDPC) has been developed as a promising material in microelectronics. The PAA was prepared from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 4,4′‐oxydianiline (ODA) in dimethyl sulfoxide (DMSO). The PSPI, consisting of PAA (69 wt %), TPVE (21 wt %), PTMA (3 wt %), and BDPC (7 wt %), showed high sensitivity of 21 mJ/cm² and a high contrast of 6.8 when it was exposed to a 436‐nm line (g‐line), postbaked at 90 °C for 5 min, and developed with 1.69 wt % TMAHaq. A clear positive image of 8 μm line and space pattern was printed on film, which was exposed to 50 mJ/cm² of g‐line by a contact printing mode and fully converted to the corresponding polyimide (PI) pattern on heating at 200 °C, confirmed by FTIR spectroscopy. Thus, this system will be a good candidate for next generation PSPIs. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3362–3369, 2009     

Allylation of methylenecyclopropanes with allylindium reagents

Methylenecyclopropanes carrying a hydroxymethyl group at the ring underwent stereoselective allylindation with allylindium sesquiiodide to afford the allylated products, in which the allyl group was delivered at the external sp² carbon via cyclopropylindium intermediates. The reaction of ethyl 2-cyclopropylideneacetate and triallylindium afforded the 1,4-adduct along with dimeric products.     

Enantioselective total synthesis of sacrolide A

An enantioselective total synthesis of sacrolide A, an antimicrobial and cytotoxic fourteen-membered macrolactonic oxylipin isolated from an edible freshwater cyanobacterium, has been accomplished from a known carboxylic acid in 20% overall yield by a concise ten-step sequence. The key transformations include chiral oxazolidinone-based diastereoselective installation of two hydroxy-bearing stereocenters, the Horner–Wadsworth–Emmons olefination to construct the full carbon skeleton, and the Shiina macrolactonization to establish the fourteen-membered macrolide structure.     

Pattern formation of polyimide by using photosensitive polybenzoxazole as a top layer

A versatile method for positive-type patterning of polyimide (PI) based on a two-layer photosensitive poly(benzoxazole) (PSPBO) and poly(amic acid) (PAA) film has been developed to provide a promising material in the field of microelectronics. This patterning system consisted of a pristine PAA thick bottom-layer and a poly(o-hydroxy amide) (PHA) thin top layer with 9,9-bis[4-(tert-butoxycarbonyl-methyloxy)phenyl]fluorene (TBMPF) as a dissolution inhibitor, and (5-propylsulfonyloxyimino-5H-thiophene-2-ylidene)-(2-methylphenyl)-acetonitrile (PTMA) as a photoacid generator (PAG). The PHA and PAA were prepared from 4,4′-(hexafluoroisopropylidene)-bis(o-aminophenol) and 4,4′-oxybis(benzoic acid) derivatives, and 3,3′,4,4′-biphenyltetracarboxylic dianhydride and 4,4′-oxydianiline, respectively, in N,N-dimethylacetamide. This two-layer system based on PHA (150-nm thickness) and PAA (1.5-μm thickness) showed high sensitivity of 35 mJ/cm² and high contrast of 10.3 when exposed to a 365 nm line (i-line), post-baked at 100 °C for 2 min, and developed in a 2.38 wt.% tetramethylammonium hydroxide aqueous solution/5 wt.% iso-propanol at 25 °C. A clear positive image of a 4-μm line-and-space pattern was printed on a film which was exposed to 100 mJ/cm² of i-line by a contact-printing mode and fully converted to the corresponding PBO/PI pattern upon heating at 350 °C, confirmed by FT-IR spectroscopy. This two-layer system could be applied to the patterning of various PAAs.     

Electric Field Gradients of B in TiO2

We observed the electric quadrupole interaction of ¹²B implanted in the interstitial site of TiO₂ using β-NMR method. The electric field gradients including the direction of the principal axes were determined. The direction agreed well with the theoretical calculation.     

Proton response of high sensitivity CR-39 copolymer

We studied the track response for the copolymer of CR-39 monomer with N-isopropylacrylamide (NIPAAm) as well as etching properties. It was found that copoly (CR-39/NIPAAm/Naugard 445) composed in wieght ratio of 99/1/0.01 is highly sensitive to low LET particles in the region below 10 keV/μm of LET and able to record normally incident particles of LET down to 1.5 keV/μm, recording protons up to the energy of 27 MeV. These results were compared with the responses for two types of CR-39 detectors containing a small quantity of antioxidant. The threshold energy proton registration is discussed.     

Demonstration of laser-frequency upshift by electron-density modulations in a plasma wakefield

In a plasma wake wave generated by a high power laser, modulations of the electron density take the shape of paraboloidal dense shells, moving almost at the speed of light. A counterpropagating laser pulse is partially reflected from the shells, acting as relativistic flying mirrors, producing a time-compressed frequency-multiplied pulse due to the double Doppler effect. The counterpropagating laser pulse reflection from the plasma wake wave accompanied by its frequency multiplication (with a factor from 50 to 114) was detected in our experiment.