Microwave assisted extraction of essential oils from enzymatically pretreated lavender (<Emphasis Type="Italic">Lavandula angustifolia</Emphasis> Miller)

In this study, microwave assisted a hydrodistillation process (MWHD) of essential oils from lavender (Lavandula angustifolia Miller) was investigated. In order to examine any potential differences in essential oil extraction, the lavender flowers underwent enzymatic pretreatment.A 2³ factorial design of experiments, combined with statistical methods of data analysis were used to optimize enzymatic pretreatment and to evaluate the influence of major variables (enzyme concentration, temperature and pH) on the performance of the microwave assisted extraction.Under optimal conditions, an extraction yield of 24 mg oil g^?1 substrate was achieved (an increase by approximately 25% in comparison with the classic extraction conditions of conventional hydrodistillation).The main compounds of the essential oils obtained were analyzed and identified by gas chromatography coupled to mass spectrometry (GC-MS). Analyzing the data obtained indicated that the content of main compounds (linalool and linalyl acetate ? 73%) was greater than that obtained by conventional extraction (67%).

Open image in new window

     

Two-dimensional infrared correlation spectroscopic studies of polymer blends--specific interactions in polyethylene adipate/cholesteryl palmitate blends

Generalized two-dimensional infrared (2D IR) correlation spectroscopy has been applied to the study of the conformational changes and specific interactions in blends of polyethylene adipate (PEA) and cholesteryl palmitate (CP). IR spectra of CP, PEA, and their blends of different compositions: 10/90, 16/84, 32/68, 64/36, and 80/20 have been recorded. In order to apply 2D IR correlation analysis, the samples are divided into two sets: set A with high PEA content 0/100, 10/90, 16/84, 32/68 CP/PEA and set B with high CP content 64/36, 80/20 and 100/0 CP/PEA. The 2D IR synchronous correlation analysis separates the bands of PEA from those of CP. The cross-peaks in 2D IR asynchronous correlation analysis are indicative of the specific interaction or the conformational change in the blends. The bands of CO, OH and C-O vibrations of PEA, and CH(3) and C-O vibrations of CP that are very sensitive to the intermolecular hydrogen bonding effect and consequently the partial miscibility of components, have been assigned by 2D correlation analysis.     

Uncommon coordination behaviour of P(S) and P(Se) units when bonded to carboranyl clusters: experimental and computational studies on the oxidation of carboranyl phosphine ligands

Oxidation of closo-carboranyl diphosphines 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr) and closo-carboranyl monophosphines 1-PR(2)-2-R'-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr, Cy; R'=Me, Ph) with hydrogen peroxide, sulfur and elemental black selenium evidences the unique capacity of the closo-carborane cluster to produce uncommon or unprecedented P/P(E) (E=S, Se) and P=O/P=S chelating ligands. When H(2)O(2) reacts with 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr), they are oxidized to 1,2-(OPR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr). However, when S and Se are used, different reactivity is found for 1,2-(PPh(2))(2)-1,2-closo-C(2)B(10)H(10) and 1,2-(PiPr(2))(2)-1,2-closo-C(2)B(10)H(10). The reaction with sulfur produces mono- and dioxidation products for R=Ph, whereas Se produces the mono-oxidation product only. For R=iPr, only monooxidation takes place with S, and the second C(c)-PiPr(2) bond breaks to yield 1-SPiPr(2)-1,2-closo-C(2)B(10)H(11). When Se is used, only 1-SePiPr(2)-1,2-closo-C(2)B(10)H(11) is formed. The potential of the mono-chalcogenide carboranyl diphosphines 1-EPPh(2)-2-PPh(2)-1,2-closo-C(2)B(10)H(10) (E=S, 9; Se, 15) to behave as unsymmetric chelating bidentate ligands was studied for different metal complexes, different solvents and in the solid state. Dechalcogenation takes place in each case. Computational studies provided information on the P=E (E=S, Se) bonds. Steric effects block the bonding ability of the P=E group due to interactions between the chalcogen and the neighbouring hydrogen atoms (three from the phenyl rings and one from the carborane cluster). The electronic effects originate from the strongly electron-withdrawing character of the closo carborane cluster, which polarizes the P=E (E=S, Se) bond towards the phosphorus atom. As a consequence, the E atom is the electron-poor site and the P atom the electron-rich site in the P=E bond.     

The Influence of the Preparation Method on the Physico-Chemical Properties and Catalytic Activities of Ce-Modified LDH Structures Used as Catalysts in Condensation Reactions

Mechanical activation and mechanochemical reactions are the subjects of mechanochemistry, a special branch of chemistry studied intensively since the 19th century. Herein, we comparably describe two synthesis methods used to obtain the following layered double hydroxide doped with cerium, Mg₃Al_0.75Ce_0.25(OH)₈(CO₃)_0.5·2H₂O: the mechanochemical route and the co-precipitation method, respectively. The influence of the preparation method on the physico-chemical properties as determined by multiple techniques such as XRD, SEM, EDS, XPS, DRIFT, RAMAN, DR-UV-VIS, basicity, acidity, real/bulk densities, and BET measurements was also analyzed. The obtained samples, abbreviated HTCe-PP (prepared by co-precipitation) and HTCe-MC (prepared by mechanochemical method), and their corresponding mixed oxides, Ce-PP (resulting from HTCe-PP) and Ce-MC (resulting from HTCe-MC), were used as base catalysts in the self-condensation reaction of cyclohexanone and two Claisen–Schmidt condensations, which involve the reaction between an aromatic aldehyde and a ketone, at different molar ratios to synthesize compounds with significant biologic activity from the flavonoid family, namely chalcone (1,3-diphenyl-2-propen-1-one) and flavone (2-phenyl-4H-1benzoxiran-4-one). The mechanochemical route was shown to have indisputable advantages over the co-precipitation method for both the catalytic activity of the solids and the costs.     

Synthesis, morphology and specific magnetization of the electrodeposited Zn-Ni-P thin films on copper substrate from non-cyanide electrolyte

Thin films of Zn-Ni-P on a copper substrate were synthesized by electrodeposition from chloride baths. It was found that the diffraction reflections of the crystal structure of Zn-Ni-P thin layers occur at thicknesses d ≥ 5 µm. The X-ray diffraction studies results confirm the formation in the Zn-Ni-P films of ZnNi₁₀P₃ compound. The morphology of the obtained films was analyzed by Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectrometry (EDS). The films are continuous and have a typical topography with many homogeneous globular features. EDS confirmed the formation of Zn-Ni-P coating only in 2 samples with Zn:Ni:P atomic ratios of 1:8:4 and 4:8:3, respectively. X-ray Photoelectron Spectroscopy (XPS) revealed the chemistry and the thickness of the studied thin films. At room temperature and thickness d ≥ 5 µm the investigated thin layers exhibit high values of the specific magnetizations in the range (25–37) A m² kg^?1, leading to the potential use in devices, appliances and electronics. The Curie temperature values of the synthesized Zn-Ni-P films were determined. It was found that by heating Zn-Ni-P thin layers of thicknesses d ≥ 5 µm up to a temperature T=900 K an interaction was detected with the copper substrate leading to a lower specific magnetization.      

Synthesis of Some Flame-Retardants Containing Phosphorus and Halogen

Polyphosphonates, one of the longest known classes of organophosphonic compounds, are of interest because they can confer low flammability, plasticity, thermal stability, and lubrication properties on polymers.     

Determining the temperature to initiate the explosion of a propellant

Summary Gun propellants are per definition instable substances. During their lifetime a slow decomposition process is going-on. During this decomposition process the heat that is generated accelerates the process, which could result to an unsafe situation, or an unexpected explosion of the material. The temperature to initiate the explosion of a propellant is of importance for the storage conditions of such a substance. The method used so far to evaluate this temperature is based on an extrapolation of the Kissinger equation at zero heating rate. A new proposal is the use of the invariant kinetic parameters (IKP) method to determine the iso-kinetic temperature and extrapolating it to zero heating rate as an alternative method. The results are discussed for some examples.     

Free radical and nitroxide mediated polymerization of hydroxy–functional acrylates prepared via lipase–catalyzed transacylation reactions

3‐Hydroxypropyl acrylate, 4‐hydroxybutyl acrylate, 2‐methyl‐3‐hydroxypropyl acrylate, 2‐hydroxypropyl acrylate, neopentyl glycol acrylate, glyceryl acrylate, and dihydroxyhexyl acrylate were prepared via transacylation reaction of methyl acrylate with diols and triols catalyzed by Candida antarctica lipase B. After removal of the enzyme by filtration and the methyl acrylate by distillation, the monomers were polymerized via free radical polymerization (FRP) with azobisisobutyronitrile as initiator and nitroxide mediated polymerization (NMP) employing Blocbuilder? alkoxyamine initiator and SG‐1 free nitroxide resulting in hydroxy functional poly(acrylates). The NMP kinetics are discussed in detail. In addition, the polymers obtained by FRP and NMP are compared and the results are related to the amount of bisacrylates that are present in the initial monomer mixtures resulting from the transacylation reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2610–2621, 2010     

Trace analysis of ancient gold objects using radiochemical neutron activation analysis

Radiochemical neutron activation analysis has been applied to investigate the microelements in gold samples with archaeological importance. Chemical separation has allowed the determination of traces of Ir, Os, Sb, Zn, Co, Fe, Ni. Instrumental neutron activation analysis has been used for the determination of Cu.