(2,7-Disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) as bidentate organoaluminum Lewis acids: elucidation and synthetic Utility of the double electrophilic activation phenomenon

A series of (2,7-disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) (2) has been readily prepared in situ by treatment of the requisite 2,7-disubstituted-1,8-biphenylenediol (1) with Me3Al (2 equiv) in CH2Cl2 at room temperature; this primarily relies on the successful establishment of a new synthetic procedure of 1 starting from inexpensive m-anisidine. Evaluation of 2 as a bidentate organoaluminum Lewis acid has been performed by the reduction of ketonic substrates using Bu3SnH as a hydride source in comparison to the conventional monodentate Lewis acid dimethylaluminum 2,6-xylenoxide (11), uncovering the significantly high activation ability of 2 toward carbonyl. Particularly, (2,7-dimethyl-1,8-biphenylenedioxy)bis(dimethylaluminum) (2a) exerted the highest reactivity, which has also been emphasized in the Mukaiyama aldol reaction. The structure of the bidentate Lewis acid 2 was unambiguously determined by single-crystal X-ray diffraction analysis of 2g possessing a bulky 3,5-di-tert-butylphenyl substituent, revealing the rigid dimeric assembly in the solid state. The double electrophilic activation of carbonyl substrate by 2a has been supported by low-temperature 13C NMR analysis as well as theoretical study using the Gaussian 98 program. Moreover, unique stereoselectivity has been observed in the 2a-promoted Mukaiyama Michael addition, and highly chemoselective functionalization of carbonyl compounds in the presence of their acetal counterparts has been realized using 2a. Finally, the effectiveness of 2a for the activation of ether functionality has been demonstrated in the Claisen rearrangement of allyl vinyl ethers.     

Copper(II)-acid co-catalyzed intermolecular substitution of electron-rich aromatics with diazoesters

The intermolecular aromatic substitution of N,N-dialkylanilines and alkoxybenzenes with diazoesters is shown to proceed in the presence of catalytic amounts of both copper(II) salt and acid (Lewis or Brønsted). This method is a mild and rare metal-free C-C bond formation reaction between aromatic (sp²) and aliphatic (sp³) carbons.     

A catalytic version of hypervalent aryl-λ3-iodane-induced Hofmann rearrangement of primary carboxamides: iodobenzene as an organocatalyst and m-chloroperbenzoic acid as a terminal oxidant

The first catalytic version of hypervalent aryl-λ(3)-iodane-induced Hofmann rearrangement of primary carboxamides, which probably involves in situ generation of a tetracoordinated bis(aqua)(hydroxy)phenyl-λ(3)-iodane complex as an active oxidant from a catalytic amount of iodobenzene by the reaction with m-chloroperbenzoic acid in the presence of HBF(4) in dichloromethane-water under mild conditions, was developed.     

Solid-state ligand-driven light-induced spin change at ambient temperatures in bis(dipyrazolylstyrylpyridine)iron(II) complexes

We previously reported that an Fe(II) complex ligated by two (Z)-2,6-di(1H-pyrazol-1-yl)-4-styrylpyridine ligands (Z-H) presented a solid state ligand-driven light-induced spin change (LD-LISC) upon one-way Z-to-E photoisomerization, although modulation of the magnetism was trivial at ambient temperatures (Chem. Commun.2011, 47, 6846). Here, we report the synthesis of new derivatives of Z-H, Z-CN and Z-NO(2), in which electron-withdrawing cyano and nitro substituents are introduced at the 4-position of the styryl group to attain a more profound photomagnetism at ambient temperatures. Z-CN and Z-NO(2) undergo quantitative one-way Z-to-E photochromism upon excitation of the charge transfer band both in acetonitrile and in the solid state, similar to the behavior observed for Z-H. In solution, these substituents stabilized the low-spin (LS) states of Z-CN and Z-NO(2), and the behavior was quantitatively analyzed according to the Evans equation. The photomagnetic properties in the solid state, on the other hand, cannot be explained in terms of the substituent effect alone. Z-CN displayed photomagnetic properties almost identical to those of Z-H. Z-CN preferred the high-spin (HS) state at all temperatures tested, whereas photoirradiated Z-CN yielded a lower χ(M)T at ambient temperatures. The behavior of Z-NO(2) was counterintuitive, and the material displayed surprising photomagnetic properties in the solid state. Z-NO(2) occupied the LS state at low temperatures and underwent thermal spin crossover (SCO) with a T(1/2) of about 270 K. The photoirradiated Z-NO(2) displayed a higher value of χ(M)T and the modulation of χ(M)T exceeded that of Z-H or Z-CN. Z-NO(2)·acetone, in which acetone molecules were incorporated into the crystal lattice, further stabilized the LS state (T(1/2) > 300 K), thereby promoting large modulations of the χ(M)T values (87% at 273 K and 64% at 300 K) upon Z-to-E photoisomerization. Single crystal X-ray structure analysis revealed that structural factors played a vital role in the photomagnetic properties in the solid state. Z-H and Z-CN favored intermolecular π-π stacking among the ligand molecules. The coordination sphere around the Fe(II) nucleus was distorted, which stabilized the HS state. In contrast, Z-NO(2)·acetone was liberated from such intermolecular π-π stacking and coordination distortion, resulting in the stabilization of the LS state.     

Formation of flat, homogeneous surfaces of organized molecular films of three-armed polymerizable amphiphiles with metal-scavenging properties

Surface complexing (i.e., metal-bridged polymerization in this study) of a three-armed amphiphilic compound with metal-scavenging properties has been investigated using the surface pressure-area (π-A) isotherms of a Langmuir monolayer from the subphase. Inductively coupled plasma mass spectrometry (ICP-MS) was also carried out on eluted solutions from corresponding multilayers of the solid. Furthermore, the molecular arrangement and surface morphology of organized molecular films of the resultant comb polymer were estimated by in-plane and out-of-plane X-ray diffraction (XRD) and by atomic force microscopy. From an analysis of the wide-angle X-ray diffraction of the corresponding monomer in the bulk, the long hydrocarbon chains are observed to pack hexagonally in the solid state. Compared to their monolayer on distilled water as the subphase, a polymerized monolayer on a buffer solution containing Cd(2+) ions is remarkably expanded at 15 °C. From ICP-MS and IR measurements, it is found that this monolayer stoichiometrically contains Cd(2+) ions on the -SH group. It is found by XRD that highly ordered layer structures and regular 2D lattices are constructed in the organized molecular films of the Cd-bridged comb polymer. Furthermore, the surface morphology of Langmuir-Blodgett films fabricated from the monolayers on a buffer solution containing Cd(2+) and Pd(2+) shows flat and smooth domains upon metal scavenging and polymerization.     

Drug–tea polyphenol interaction

Propericiazine (PCZ) is an antipsychotic agent used for the treatment and the prevention of relapse of schizophrenia. We found that when an oral solution containing PCZ was mixed with a green tea drink, the residual content of PCZ was reduced by forming an insoluble complex between PCZ and tea polyphenol. In this study, the mechanism underlying the incompatibility of PCZ with green tea polyphenol (GTP) in the solution was clarified by isothermal titration microcalorimetry (ITC). Both solutions of 27.4 mM PCZ and 2.2 mM (?)-epigallocatechin gallate (EGCg), which is a main ingredient of GTP, were mixed and then PCZ in the filtrate was reduced to approximately 60 %. According to measurement at 298 K by ITC, PCZ formed an insoluble complex with EGCg at an associate constant (K) of 4.75 × 10² M^?1 exothermically, ΔH = ?40.0 kJ mol^?1. When (?)-epicatechin gallate (ECg) was used as the GTP, PCZ interacted with ECg with K and ΔH values of 3.74 × 10² M^?1 and ?22.1 kJ mol^?1, respectively. On the other hand, little heat of the reaction between PCZ and (?)-epigallocatechin or (?)-epicatechin was observed. The results indicated that the main reason for this incompatibility was the formation of an insoluble complex by PCZ and a gallate-type GTP such as EGCg and ECg in the aqueous solution.     

Hydrochlorothiazide Enhances UVA‐Induced DNA Damage

The UVA is currently thought to be carcinogenic because, similar to UVB, it induces the formation of cyclobutane pyrimidine dimers (CPDs). Various drugs have been reported to cause photosensitive drug eruptions as an adverse effect. Although the precise mechanism of photosensitive drug eruption remains to be elucidated, it is generally accepted that free radicals and other reactive molecules generated via UV‐irradiated drugs play important roles in the pathogenesis of photosensitive drug eruptions. The waveband of concern for photo‐reactive drugs is UVA‐visible light, but some extend into the UVB region. We tested whether photosensitive drugs could enhance CPD formation after UVA exposure by using isolated DNA in the presence of several reported photosensitive drugs using high‐performance liquid chromatography. We found that the diuretic agent hydrochlorothiazide (HCT) significantly enhanced the production of TT dimers over a wide range of UVA. Furthermore, we investigated whether UVA plus HCT could enhance CPD production in xeroderma pigmentosum model mice defective in nucleotide excision repair. Immunofluorescence studies showed that CPD formation in the skin significantly increased after 365 nm narrow‐band UVA irradiation in the presence of HCT, compared with that in wild‐type mice. HCT could be used with caution because of its enhancement of UVA‐induced DNA damage.     

Vinyl-lambda 3-iodanes act as efficient sulfur atom acceptors: vinylic SN2-based strategy for conversion of tertiary thioamides to amides

Exposure of tertiary thioamides to (E)-1-hexenyl(phenyl)-lambda 3-iodane results in vinylic SN2 reaction to give the inverted (Z)-S-vinylthioimidonium salts, which under alkaline hydrolysis (Na2CO3 or K2CO3) selectively afford amides, while (Z)-S-vinyl thioesters are obtained in high yields via the hydrolysis under acidic conditions (HCl).