Retention mechanism of L-glutamide-derived noncrystalline stationary phases in reversed-phase high-performance liquid chromatography and application for separation of nucleic acid constituents

Double alkylated L-glutamide-derived noncrystalline stationary phases Sil-DSG and Sil-DBG have been prepared by coupling N',N'-dioctadecyl-N-[4-carboxybutanoyl]-L-glutamide (DSG) and N',N',-dibutyl-N-[4-carboxybutanoyl]-L-glutamide (DBG) with aminopropylated silica (Sil-APS). TEM observations of DSG and DBG showed that lipid DSG can aggregate in organic solvents (methanol, chloroform, toluene, etc.) and self-assembled nano fibers are observed while such fibrous aggregations are not observed for DBG. The resulting chromatographic data have been provided information about its selective interaction with guest molecules (PAHs) in RP-HPLC. We have observed that the carbonyl groups in Sil-DSG exist in ordered state by forming a condensing thin layer over silica surface while DBG cannot form such an ordered state due to its lower order of short alkyl chain. The ordered carbonyl groups present in Sil-DSG promotes multiple carbonyl pi-benzene pi interactions with guest PAHs isomers which enhance the selectivity for these compounds. The contribution of pi-pi interactions was also supported by the substantial effects on the selectivity of benzene and nitrobenzenes. The effect of pi-electron containing solvent on the retention behavior of the PAHs was also studied. The selectivity for nucleic acid constituents, i.e. nucleosides and its bases were also evaluated by Sil-DSG and the selectivity for these compounds on Sil-DSG was compared with the selectivity of conventional polymeric ODS phase. It has been found that Sil-DSG provided higher selectivity for nucleic acid constituents than polymeric ODS and that HPLC packing materials can be efficiently employed for routine analysis of these compounds. The effect of methanol content on the separation behavior of nucleosides was also studied.     

Deposition of thin mesoporous silica films on glass substrates from basic solution

Transparent thin (ca. 100 nm) films of silica-surfactant mesostructured materials were deposited on borosilicate glass plates and soda-lime glass tubes from aqueous solutions containing tetraethoxysilane, alkyltrimethylammonium chloride, ammonia, and methanol. By calcination in air, the films became mesoporous (BET surface area of 700-900 m2 g-1) with pore diameter 2.0-2.8 nm.     

Novel Azaferrocenyliminonickel Catalysts for Olefin Polymerization

Summary: The azaferrocenyliminonickel dibromide complexes 1 bearing a pentaphenylcyclopentadienyl group and a wide range of N‐aryl groups were synthesized and examined as catalysts for ethylene polymerization. Both the ortho‐ (R¹) and para‐substituents (R²) of the N‐aryl groups in 1 were found to strongly influence both the polymerization activity and the properties of the obtained polyethylenes. The effect of changing the polymerization conditions, such as temperature, ethylene pressure, and cocatalyst, was also examined.

Azaferrocenyliminonickel(II ) complexes.     

Freezing transition of wetting film of tetradecane on tetradecyltrimethylammonium bromide solutions

We have performed ellipsometry and surface tensiometry at tetradecyltrimethylammonium bromide (TTAB) aqueous solution surface coexisting with tetradecane lens as a function of the molality of TTAB and the temperature under atmospheric pressure. From the theoretical analysis of the coefficient of ellipticity, it was clarified that the liquid monolayer comprising the surfactant and alkane is formed at higher surfactant concentrations by the wetting transition of tetradecane lens on the aqueous solution, and the solid monolayer is formed by lowering temperature (freezing transition). The results of the surface tension measurement support the occurrence of wetting transition and the freezing transition. A phase diagram of the wetting film was constructed by ellipsometry and surface tensiometry, of which the mixed solid monolayer had never been reported before. From the thermodynamic analysis of the phase diagram, it is also demonstrated that the TTAB surface density decreases accompanied with the freezing transition, which agrees with surface densities of TTAB calculated from surface tension vs. concentration curves.     

Dielectric and tunable properties of highly (110)-oriented (Ba<Subscript>0.65</Subscript>Sr<Subscript>0.35</Subscript>)TiO<Subscript>3</Subscript> thin films deposited on Pt/LaNiO<Subscript>3</Subscript>/SiO<Subscript>2</Subscript>/Si substrates

Highly (110)-oriented Ba_0.65Sr_0.35TiO₃ films were deposited on Pt/LaNiO₃/SiO₂/Si substrates by a sol–gel method. It was found that the (110)-preferred Pt film was very effective for growing (110)-oriented ferroelectric films with perovskite structure. The as-grown Ba_0.65Sr_0.35TiO₃ films showed good dielectric properties with dielectric constant and loss tangent tan δ = 0.026. Excellent dielectric tunability was also achieved in the (110)-oriented films. With applying an electric field of 230 kV/cm at 100 kHz, the dielectric tunability and the figure of merit can reach up to 63.4% and 16, respectively. These results indicate that the highly (110)-oriented Ba_0.65Sr_0.35TiO₃ film is a promising candidate for the applications in microwave tunable devices.     

A smart gelator as a chemosensor: application to integrated logic gates in solution, gel, and film

A gelator that consisted of one benzimidazole moiety and four amide units was used as a chemosensor. We found that its absorption and emission spectra in solution were sensitive to two complementary chemical stimuli: protons and anions. Thus, YES and INH logic gates were obtained when absorbance was defined as an output. A combination gate of XNOR and AND with an emission output was also obtained. Moreover, wet gels in two solvents were used to construct two more-complicated three-input-three-output gates, owing to the existence of the gel phase as an additional output. Finally, in xerogel films that were formed from two kinds of wet gels, reversible changes in their emission spectra were observed when they were sequentially exposed to volatile acid and NH(3). Another combination two-output logic gate was obtained for xerogel films. Finally, three states of the gelator were used to construct not only basic logic gate, but also some combination gates because of their response to multiple chemical stimuli and their multiple output signals, in which one chemical input could erase the effect of another chemical input.     

An efficient novel synthesis of beta-(azuleno[1,2-b]benzothienyl)- and beta-(azuleno[2,1-b]benzothienyl)-alpha,beta-unsaturated ketones by the tropylium ion-mediated intramolecular furan ring-opening reaction and X-ray investigation of methyl ketone derivative

Intramolecular reaction of 2-tropylio-3-(5-substituted 2-furyl)benzothiophenes (3), prepared from the corresponding 2-cycloheptatrienyl-3-(5-substituted 2-furyl)benzothiophenes (2), afforded the beta-(azuleno[1,2-b]benzothienyl)-alpha,beta-unsaturated ketones (4), which are otherwise difficult to obtain, in moderate yields. The reaction involves a ring-opening process of the furan ring by intramolecular attack of the tropylium ion onto the 2-position of the furan ring. Similarly, beta-(azuleno[2,1-b]benzothienyl)-alpha,beta-unsaturated ketones (8) were obtained from the corresponding 3-tropylio-2-(5-substituted 2-furyl)benzothiophenes (7) albeit in lower yields. The molecular and crystal structures of the methyl ketone derivative, 8a, are discussed on the basis of X-ray structure analysis.     

Cyclopropanation and carbonyl olefination utilizing 2-(Alk-1-yn-1-yl)-2-(trialkylsilyl)-1,3-dithianes via regioselective generation of titanium alkynylcarbene complexes

Cp(2)Ti[P(OEt)(3)](2)-promoted reactions of 2-(alk-1-yn-1-yl)-2-(trialkylsilyl)-1,3-dithianes (RS)(2)C(Si)CCR with terminal olefins and carbonyl compounds produced (trialkylsilylethynyl)cyclopropanes and 1-(trialkylsilyl)alk-3-en-1-ynes, respectively. These compounds were suggest to be produced via the formation of intermediary titanium alpha-(trialkylsilylethynyl)carbene complexes Cp(2)Ti=C(R)CCSi in preference to their regioisomers, alpha-(trialkylsilyl)alkynylcarbene complexes Cp(2)Ti=C(Si)CCR.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.