Thermal Conductivity of poly-p-phenylene-2,6-benzobisoxazole Film along the In-Plane Axis in the 10–300 K Temperature Range

The thermal conductivities of compression molded thin films of poly-p-phenylene-2,6-benzobisoxazole (PBO) were measured in directions along an in-plane axis in the 10–300?K temperature range by a steady-state heat flow method, with interest in the use of the material for superconductivity applications. The thermal conductivities of the PBO films increased from 0.3?W/mK to 9.0?W/mK with increasing temperature from 10?K to 300?K and these were much higher than those of polyimide films, epoxy resin and glass fiber reinforced plastics at all temperatures. The 9.0?W/mK at 300?K was 60% of that of stainless steel (SUS304). It was 6?W/mK at 150?K, which was half that of SUS304 and was 3.3?W/mK at 77?K, which was 33% of that of SUS304. The thermal conductivities of the PBO films were lower than those of a cloth of high strength ultrahigh molecular weight polyethylene fiber reinforced plastics in the 30?K–180?K temperature range and were almost equivalent to its values in the 180?K–300?K temperature range. The main contribution to the thermal conduction in the PBO films was from thermal phonon conduction along the molecular chains. Although many kinds of high thermal conductivity polymeric materials have been prepared by a uni-directional drawing process or by adding high thermal conductive additives, the PBO film showed high thermal conductivity without a uni-directional drawing process or high thermal conductive additive.     

Symmetrically glass-clad photonic crystal nanocavities with ultrahigh quality factors

We design and fabricate ultra-high-quality (Q) photonic nanocavities in a symmetrically glass-clad silicon (Si) two-dimensional (2D) photonic crystal (PhC) structure. We theoretically investigate the dependence of the refractive index of the glass on the Q factors for asymmetric and symmetric structures. We show that the index-symmetric distribution of the glass is a critical factor to realize ultrahigh Q factors for glass-clad 2D PhC structures. We fabricate symmetrically glass-clad Si PhC nanocavities and achieve a record Q factor of 1×10(6), comparable with the highest Q factors of nanocavities in air-bridge structures.     

Electrodeposition of aluminum–hafnium alloy from the Lewis acidic aluminum chloride-1-ethyl-3-methylimidazolium chloride molten salt

The electrochemistry of Hf(IV) and the electrodeposition of Al–Hf alloys were examined in the Lewis acidic 66.7–33.3 mol% aluminum chloride-1-ethyl-3-methylimidazolium chloride molten salt containing HfCl₄. When cyclic staircase voltammetry was carried out at a platinum disk electrode in this melt, the deposition and stripping waves for Al shifted to negative and positive potentials, respectively, suggesting that aluminum stripping is more difficult due to the formation of Al–Hf alloys. Al–Hf alloy electrodeposits containing ~13 at.% Hf were obtained on Cu rotating wire and cylinder electrodes. The Hf content in the Al–Hf alloy deposits depended on the HfCl₄ concentration in the melt, the electrodeposition temperature, and the applied current density. The deposits were composed of dense crystals and were completely chloride-free. The chloride-induced pitting corrosion potential of the resulting Al–Hf alloys was approximately +0.30 V against pure aluminum when the Hf content was above 10 at.%.     

Remote asymmetric induction with vinylketene silyl n,o-acetal

A highly regio- and diastereoselective TiCl4-mediated vinylogous Mukaiyama aldol reaction using the chiral vinylketene silyl N,O-acetal has been developed. The present vinylogous Mukaiyama aldol reaction provides a unique and effective means of controlling remote asymmetric induction. The methyl group at the alpha-position is important in achieving a high level of stereoselectivity. From a synthetic point of view, this methodology can provide a one-step construction of delta-hydroxy-alpha,gamma-dimethyl-alpha,beta-unsaturated carbonyl unit that is seen in many natural polyketide products.     

Highly anti-selective catalytic aldol reactions of amides with aldehydes

Barium phenoxide-catalyzed, highly anti-selective direct-type aldol reactions of amides with aldehydes have been developed. In the presence of a slight excess amount of an amide, the desired reactions proceeded smoothly under mild conditions, and a wide range of aromatic, heterocyclic, alpha,beta-unsaturated aldehydes were applicable to afford the desired adducts in high yields with high anti-selectivities. A catalytic, enantioselective reaction of an amide with an aldehyde using a chiral ligand is also described.     

Elution behaviour and environmental impact of heavy metals and rare-earth elements from volcanic ashes of Mt. Oyama,Miyake Island

To obtain information on the environmental impact of materials eluted from volcanic ashes of Mt. Oyama, Miyake Island, which erupted in July 2000, the dissolution behaviours of heavy metals and rare-earth elements from the volcanic ashes were examined. The most important characteristic of the Mt. Oyama eruption is that sulphur dioxide (SO₂) gas has been continuously released, and all persons living on Miyake Island have been required to evacuate. To estimate in terms of the volcanic eruption using SO₂ gas, the ash nature in Mt. Usu, Hokkaido, was also examined and compared with that in Mt. Oyama. When rain water mixed the ashes, the water from the ashes of Mt. Oyama became acidic because of the sulphuric acid. Therefore, SO₂ gas in Mt. Oyama can accelerate the dissolution of protons and heavy metals in the ashes, whereas the rain water in Mt. Usu was not acidic and the dissolution of the heavy metals was not so evident compared with that in the case of Mt. Oyama. With this sulphuric acid, heavy metals such as As, Cd, Pb and Hg in the ashes in Mt. Oyama easily dissolved owing to the low pH. The ashes in Mt. Oyama had been released for eight years and the amount of fallen ashes was estimated to be 33 billion tons. The weights of the harmful heavy metals in the volcanic ashes, such as As, Cd, Pb and Hg, were estimated to be 3.8?×?10², 1.3?×?10³, 1.1?×?10³ and 29?kg, respectively, and these heavy metals were dissolved and diluted in seawater. Therefore, the concentration and species (chemical form) of these metals should be carefully monitored in the future. Moreover, SO₂ gas, which has a direct effect on human health and has been monitored continuously, causes other effects, such as facilitation of metal ion elution and rock aeration.     

Properties of calcium-induced gel beads prepared with alginate and hydrolysates

Calcium-induced alginate gel beads (Alg-Ca) containing alginate hydrolysate, such as the guluronic acid block (GB), was prepared and the drug release profiles were investigated under simulated gastrointestinal conditions. The addition of GB to Alg-Ca altered its rheological properties. A model drug (hydrocortisone) was incorporated at 78% of its theoretical yield within the dried Alg-Ca containing 5% GB and it was gradually released from the beads in JP XIV 1st medium for disintegration test (pH 1.2), while it was rapidly released with disintegration of the gel matrix in JP XIV 2nd medium (pH 6.8). In contrast, for Alg-Ca containing GB and chitosan, disintegration was not observed in these media and the drug release rate was markedly different. These results demonstrate that the release profiles of drugs incorporated into Alg-Ca can be controlled by adding these polysaccharides.     

Effects of natural polysaccharide addition on drug release from calcium-induced alginate gel beads

Calcium-induced alginate gel beads (Alg-Ca) containing various polysaccharides, including an alginate hydrolysate, were prepared and the drug release profiles were investigated. Hydrocortisone (HC) was gradually released from Alg-Ca into the mimic gastric fluid, while in intestinal fluid, it was quickly released with the dissolution of Alg-Ca. However, with Alg-Ca containing 5% chitin (CT), dissolution of Alg-Ca was not observed, and release of HC showed apparent zero-order kinetics. Furthermore, addition of the alginate hydrolysate altered the HC-release profile for Alg-Ca.     

Purification of boron nitride nanotubes through polymer wrapping

An effective method was proposed to remove obstinate boron nitride phase impurities in boron nitride nanotubes (BNNTs). The method is based on strong interactions between BNNTs and a conjugated polymer wrapping them and significant weight and size difference between BNNTs and impurities. The as-grown samples and purified samples were compared through detailed characterization, using scanning electron microscopy, transmission electron microscopy, and Raman and Fourier transformed infrared spectroscopy. The results reveal that impurities are effectively removed and resultant BNNTs possess perfect crystallization.     

Tomographic implementation of astronomical speckle imaging from bispectra

A bispectral method for astronomical speckle imaging utilizes an average speckle bispectrum of an object to derive its Fourier phase. There has been, however, a problem in conventional bispectral algorithm owing to difficulty in processing bispectral data in a four-dimensional (4D) space. In this paper, we propose an implementation to overcome this problem, where a one-dimensional (1D) object projection is reconstructed from a two-dimensional (2D) average bispectrum of speckle projections, and object projections so obtained at various angles are then tomographically combined into a 2D object image. In this tomographic approach, processes are separable into those for individual projection angles, implying that bispectral data required to be stored at a time are from 4D to 2D and computation time can be substantially reduced by parallelizing angle-by-angle processes. We have performed experiments using simulated and observed data, and have demonstrated the feasibility of the present approach with an achievable accuracy comparable to that of a conventional approach.