EPR Detection and Characterization of High-Valent Manganese Complexes in MnIII(Salen) Catalyzed Aerobic Olefin Epoxidation

Using EPR, high-valent Mn^IV complexes have been detected in Mukaiyama's catalytic system, Mn^III(Salen)/Isobutyraldehyde/O₂, and shown to form also in the model system Mn^III(Salen)/Peroxyisobutyric acid. Their possible role in alkene epoxidation is discussed.     

First isolated active titanium peroxo complex: characterization and theoretical study

The protonated titanium peroxo complex [Bu(4)N](4)[HPTi(O(2))W(11)O(39)] (1) has been first prepared via interaction of the micro-oxo dimeric heteropolytungstate [Bu(4)N](8)[(PTiW(11)O(39))(2)O] (3) with an excess of 30% aqueous H(2)O(2) in MeCN. Peroxo complex 1 has been characterized by using elemental analysis, UV-vis, IR, resonance Raman (RR), (31)P and (183)W NMR spectroscopy, cyclic voltammetry, and potentiometric titration. The electronic and vibrational spectra of 1 are very similar to those of the well-known unprotonated titanium peroxo complex [Bu(4)N](5)[PTi(O(2))W(11)O(39)] (2), while (31)P and (183)W NMR spectra differ significantly. A compilation of the physicochemical techniques supports a monomeric Keggin type structure of 1 bearing one peroxo ligand attached to Ti(IV) in a eta(2)-coordination mode. The protonation of the titanium peroxo complex results in an increase of the redox potential of the peroxo group, E(1/2) = 1.25 and 0.88 V relative to Ag/AgCl reference electrode for 1 and 2, respectively. In contrast to 2, 1 readily reacts with 2,3,6-trimethylphenol (TMP) at 40 degrees C in MeCN to give 2,2',3,3',5,5'-hexamethyl-4,4'-biphenol (BP) and 2,3,5-trimethyl-p-benzoquinone (TMBQ). The proportion between BP and TMBQ in the reaction products depends on the TMP/1 ratio. When a 2-fold excess of TMP is used, the main reaction product is BP (90%), while using a 2-fold excess of 1 leads to TMBQ (95%). On the basis of the product study, a homolytic oxidation mechanism that implicates the formation of phenoxyl radicals is suggested. The RR deuterium labeling experiments show that the activating proton is most likely localized at a Ti-O-W bridging oxygen rather than at the peroxo group. Theoretical calculations carried out at the DFT level on the protonated and unprotonated titanium peroxo derivatives also propose that the most stable complex is formed preferentially after protonation of the Ti-O-W site; however, both Ti-OH-W and TiOO-H protonated anions could coexist in solution.     

Oxidation of mesitylene by hydrogen peroxide in AcOH-Ac2O-H2SO4

By the oxidation of raesitylene by hydrogen peroxide in AcOH-Ac₂O-H₂SO₄ one can obtain mesitol (2,4,6-trimethylphenol) (with a selectivity of 57–69% at a mesitylene conversion of 22–16% and the acetate of mesitol with a selectivity of 72–85% at 25–22% conversion. The peroxide responsible for the oxidation of mesitylene in this system is in the form of peracetic acid, formedin situ. Over the concentration range studied, the reaction is first order in AcOOH, mesitylene, and H₂SO₄. Hydroxylation of mesitylene by AcOOH proceeds by an electrophilic substitution mechanism, the limiting step being the formation of the -complex.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2716–2721, December, 1990.The authors express their thanks to L. V. Efremova, G. M. Maksimov, and V. D. Chinakov for their assistance in this work.     

Synthesis, characterization, and reactivity of Ti(IV)-monosubstituted Keggin polyoxometalates

Ti(IV)-monosubstituted Keggin-type polyoxometalates (Ti-POMs), mu-oxo dimer [Bu4N]8[(PTiW11O39)2O] (1), and three monomers [Bu4N]4[PTi(L)W11O39], where L = OH (2), OMe (3), and OAr (4, ArOH = 2,3,6-trimethylphenol (TMP)), have been prepared starting from mu-hydroxo dimer [Bu4N]7[(PTiW11O39)2OH] (5) or heteropolyacid H5PW11TiO40 or both. The compounds have been characterized by elemental analysis, IR, UV-vis, and multinuclear (31P, 1H, 183W) NMR. The interaction of 1 and 3-5 with H2O in MeCN produces 2. The hydrolysis constants, estimated from 31P and 1H NMR data, are 0.006 and 0.04 for 1 and 3, respectively. Studies by 31P NMR, IR, potentiometric titration, and cyclic voltammetry revealed that 1-3 and 5 afford the same protonated titanium peroxo complex [Bu4N]4[HPTi(O2)W11O39] (I) upon interaction with aqueous H2O2 in MeCN. The rates of formation of I correlate with the rates of hydrolysis of the Ti-POMs and follow the order of 5 > 1 > 3. A two-step mechanism of the reaction of Ti-POMs with H2O2, which involves hydrolysis of the Ti-L bonds to yield 2 followed by fast interaction of 2 with hydrogen peroxide producing I, is suggested. The equilibrium constant for the reaction of 2 with H2O2 to yield I and H2O, estimated using 31P NMR, is 10. The interaction of the Ti-POMs with TMP follows the trends similar to their interaction with H2O) and requires preliminary hydrolysis of the Ti-L bonds. All of the Ti-POMs catalyze the oxidation of TMP with H2O2 in MeCN to give 2,3,5-trimethyl-p-benzoquinone and 2,2',3,3',5,5'-hexamethyl-4,4'-biphenol. The product distribution is similar for all of the Ti-POMs. The catalytic activities of the Ti-POMs correlate with the rates of formation of I and follow the order of 2 > 5 > 1 > 3. The findings lay a basis for a better understanding of the nature of the reactivity of titanium in Ti-catalyzed oxidations.     

FTIR spectroscopic study of titanium-containing mesoporous silicate materials

The surface acidity of different mesoporous titanium-silicates, such as well-organized hexagonally packed Ti-MMM, Ti-MMM-2, Ti-SBA-15, and amorphous TiO(2)-SiO(2) mixed oxides (aerogels and xerogels), was studied by means of FTIR spectroscopy of CO adsorbed at 80 K and CD(3)CN adsorbed at 293 K. The surface hydroxyl groups of mesoporous titanium-silicates with 2-7 wt % Ti revealed a Br?nsted acidity slightly higher to that of pure silicate. TiO(2)-SiO(2) xerogels revealed the highest Br?nsted acidity among the titanium-silicates studied. CO adsorption revealed two additional sites on the surface in comparison to pure silicate, characterized by nu(CO) from 2185 (high pressure) to 2178 (low pressure) cm(-1) and from 2174 (high pressure) to 2170 (low pressure) cm(-1). These bands are due to CO adsorbed on isolated titanium cations in the silica surrounding or having one Ti(4+) cation in their second coordination sphere and due to CO interactions with Ti-OH groups, respectively. CD(3)CN adsorption similarly revealed the existence of two additional sites, which were not detected for pure silicate: at 2289 cm(-1) due to CD(3)CN interaction with titanol groups and from 2306 (low pressure) to 2300 (high pressure) cm(-1) due to acetonitrile interaction with isolated framework titanium cations with probably one Ti(4+) cation in their second coordination shell. The spectroscopic results are compared with computational data obtained on cluster models of titanium-silicate with different titanium content. According to the IR data, the Ti accessibility on the surfaces for mesoporous titanium-silicates with similar Ti loading (2 wt %) was found to fall in the order TiO(2)-SiO(2) aerogel approximately TiO(2)-SiO(2) xerogel > Ti-MMM approximately Ti-MMM-2 > Ti-SBA-15. This order (except TiO(2)-SiO(2) xerogel) correlates with the catalytic activity found previously for titanium-silicates in 2,3,6-trimethylphenol oxidation with H(2)O(2).     

THE EFFECT OF ACIDS ON THE INFRARED SPECTRA OF SCHIFF BASES—II. IMINES CONTAINING THE C=C-C=N AND C=C-C=C-C=N UNITS

Abstract— The Fourier-transform infrared spectra of chloroform-d solutions of conjugated imines CH₃CH=CHCH=NCH(CH₃)₂ and CH₃CH₂CH=CHCH=CHCH=NCH(CH₃)₂ and the related protonated species with HCl, HBr, HI, trichloro, dichloro, monobromo and monochloroacetic acids or propionic acid are presented. The effects of conjugation and protonation are examined. The results show that conjugation slightly increases the basicity of the Schiff bases. HCl, HBr and HI protonate the Schiff bases completely. The carboxylic acids protonate partially depending on their p K _a, values. When the Schiff base contains two (or more) C=C bonds conjugated with C=N, the main C=C stretching band undergoes a strong intensification showing that sizeable dipole moment variations occur along the conjugated chain.     

Titanium-Substituted Heteropolytungstates as Model Catalysts for Studying the Mechanisms of Selective Oxidation by Hydrogen Peroxide

The ³¹P NMR method shows that four forms of titanium(IV)-monosubstituted Keggin-type heteropolytungstate (Ti–HPA) exist in MeCN: the dimer (Bu₄N)₇[{PTiW₁₁O₃₉}₂OH] (in the abbreviated form, (PW₁₁Ti)₂OH or H1), its conjugate base (PW₁₁Ti)₂O (1), and two monomers, PW₁₁TiO (2) and PW₁₁TiOH (H2). The ratio between the forms depends on the concentrations of H⁺and H₂O. Dimer H1is produced from 2in MeCN when H⁺(1.5 mol) is added, and monomer H2is the key intermediate in this process. The catalytic activity of Ti–HPA in the oxidation of thioethers by H₂O₂correlates with their activity in peroxo complex formation and decreases in the order H2> H1> 2. The reaction of 2with H₂O₂in MeCN occurs slowly to form the inactive peroxo complex PW₁₁TiO₂(A). The addition of H₂O₂to H1and H2most likely results in the formation of the active hydroperoxo complex PW₁₁TiOOH (B). Complexes Aand Btransform into each other when H⁺or OH^–(1 mol) is added per 1 mol of Aor B, respectively. The activity of Btoward thioethers in the stoichiometric reaction is proven by ³¹PNMR and optical spectroscopy.