Preparation of Ultramicroporous Materials by Fluidized-Bed Pyrolytic Deposition of Carbon in Pores of a Carbon Matrix

Samples of microporous materials were prepared by pyrolytic deposition of carbon from divinyl in a fluidized bed reactor onto carbon supports obtained from coconut and pine nut shells. The influence exerted on the adsorption capacity for CO2 by the divinyl pyrolysis temperature (in the range 600–750°С) and degree of densification (in the range 6–22%) was studied. Carbon deposition conditions ensuring the specific surface area (S_BET) lower than 5 m2 g^–1 at the adsorption capacity for СО₂ higher than 1 mmol g^–1 for both samples were found.     

Degradation of physicomechanical properties of epoxy nanocomposites with carbon nanotubes upon heat and humidity aging

The dependence of the physicomechanical properties of epoxy nanocomposites subjected to heat and humidity aging on the type of covalently functionalized carbon nanotubes and on the uniformity of their distribution in the epoxy matrix was studied. Two types of carbon nanotubes were used: those modified with carboxy and amide groups. The elastic modulus, bending deflection, and ultimate bending strength for the initial epoxy nanocomposites with carbon nanotubes and for those subjected to heat and humidity aging were determined. The epoxy binders modified with carboxylated carbon nanotubes are more resistant to the action of aging factors. The presence of aggregates of carboxylated carbon nanotubes in the epoxy matrix positively influences the preservation of physicomechanical properties of the composite subjected to heat and humidity aging. Microscopic examination revealed structural features of the epoxy nanocomposite and their effect on the resistance of the composite to the heat and humidity aging.     

Specific structural features of crystalline regions in biodegradable composites of poly-3-hydroxybutyrate with chitosan

Differential scanning calorimetry and X-ray diffraction at wide and small angles were used to examine the biodegradable composites of poly-3-hydroxybutyrate with chitosan, produced by mixing of these polymers in a rotor disperser at 150°C. Samples of individual polymers and composites with 80, 40, and 20 wt % poly- 3-hydroxybutyrate were studied. It was found that the presence of chitosan in the composites leads to a change in the crystallite size of poly-3-hydroxybutyrate and to an increase in the large period in this polymer. Mixing of poly-3-hydroxybutyrate with chitosan affects the structural rearrangement in crystalline regions of poly-3-hydroxybutyrate under a high-temperature treatment. The effect of a high-temperature treatment of the composites via alternation of melting–crystallization cycles in the nonisothermal mode, when a sample is heated and cooled at the same constant rate of 8 deg min–1 in the range from 20 to 200°C and is annealed at a temperature of 150°C, was analyzed. This analysis suggests that, in composites of this kind, the intermolecular interaction between the components is a factor strongly affecting the structure of the crystalline regions and the mechanism of their rearrangement in the course of annealing. The mechanism of this interaction is discussed.     

Distribution of Zinc Oxide Nanocrystals in a Polymer Film

The structure of polymer films modified with zinc oxide nanocrystals was studied by the optical absorption and small-angle X-ray scattering methods. Small-angle X-ray scattering allows determination of the nanoparticle size distribution function, which is the decisive factor in predicting the optical properties of heterophase materials, including filled polymer films. The optical absorption spectrum of an acrylate polymer film doped with 1.6 wt % zinc oxide nanocrystals approaches the ideal absorber spectrum, which allows this material to be recommended for use as a protective color filter.     

Synthesis of fused derivatives of 1,8-naphthyridine

Reactions of aromatic aldehyde, 2-aminoprop-1-ene-1,1,3-tricarbonitrile and cyclic enhydrazinoketones led to the formation of N-substituted 5-aryl-2,4-diamino-6-oxo-5,6,7,8,9,10-hexahydrobenzo[b][1,8]- naphthyridine-3-carbonitriles     

Synthesis of 2-(5-aryl-4-methyl-2-oxo-1,2-dihydro- 3<Emphasis Type="Italic">H</Emphasis>-pyrrol-3-ylidene)malononitriles

4-Oxoalkane-1,1,2,2-tetracarbonitriles in the presence of an equimolar amount of morpholine were converted to previously unknown 2-(5-aryl-4-methyl-2-oxo-1,2-dihydro-3H-pyrrol-3-ylidene)malononitriles.     

Synthesis of pyrrole-dihydrothiazole ensembles from 1-allenyl-1H-pyrrole,isothiocyanates, and propargyl bromide

Russian Journal of Organic Chemistry - N-Alkylidene-1-(propargylsulfanyl)-2-(1H-pyrrol-1-yl)buta-1,3-dien-1-amines at treatment by a superbasic system t-BuONa–THF–DMSO under standard...     

Synthesis of aminium 23,24,24-tricyano-3β-hydroxy-20-oxo-21-nor-17β-cholane-5,21-dien-24-ides from tetracyanoethylated pregnenolone

Russian Journal of Organic Chemistry - Reactions of tetracyanoethylated pregnenolone with ammonia and amines in anhydrous medium at reduced temperature afforded new ionic pregnenolone derivatives,...     

New chalcones containing carbazole and 3,4-ethylenedioxythiophene fragments

Russian Journal of Organic Chemistry - Acylation of 9-(2-ethylhexyl)carbazole with acetyl bromide in the presence of tin(IV) chloride gave 3-acetyl- and 3,6-diacetyl-9-(2-ethylhexyl)carbazoles...     

Formation of 1-aminophenazine from 3,4-dihydrophenazin-1(2H)-one oxime in the system acetylene–KOH–DMSO

Russian Journal of Organic Chemistry - The reaction of 3,4-dihydrophenazin-1(2H)-one oxime with acetylene in the superbasic system KOH–DMSO afforded 1-aminophenazine in 32% yield instead of...