Study on the equilibria of the complex formation of molybdenum(VI) with 3,5-dinitrocatehol and 3-(2-naphthyl)-2,5-diphenyl-2H-tetrazolium chloride

The formation of an ion-associated complex between the anionic chelate of Mo(VI)–3,5-dinitrocatehol (3,5-DNC) and the cation of 3-(2-naphthyl)-2,5-diphenyl-2H-tetrazolium chloride (TV) in the liquid–liquid extraction system Mo(VI)–3,5-DNC–TV–H₂O–CHCl₃ was studied by spectrophotometry. The optimum conditions for the complex formation and extraction of the ion-associated complex were established. The effect of co-existing ions and reagents on the process of complex formation was investigated under optimum extraction conditions. The validity of Beer’s law was checked and some analytical characteristics were calculated. The association process in aqueous phase and the extraction equilibria were investigated and quantitatively characterized. The following key constants of the processes were calculated: association constant, distribution constant, extraction constant and recovery factor. The molar ratio of the reagents was determined by independent methods. Based on this, a reaction scheme, a general formula and a structure of the complex were suggested.     

Production and characteristics of substituted lanthanum niobate LaNb<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>W<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4 + δ</Subscript>

Solid solutions LaNb_1–x W _x O_{4 + δ} (x = 0.02–0.10, Δx = 0.02) were investigated, which crystallize in the monoclinic system (space group I2/c) at room temperature and undergo a phase transition into the tetragonal modification with increasing temperature. The stability of various modifications was analyzed by high-temperature X-ray powder diffraction analysis. The electrical conductivity of sintered samples was studied by impedance spectroscopy. Insertion of tungsten into the niobium sublattice leads to an increase in the conductivity of the solid solutions.     

Total reflection X-ray fluorescence determination of rare earth elements in mineral water

A method is proposed for determination of lanthanum, cerium, praseodymium, neodymium, and samarium in mineral water by means of total-reflection X-ray fluorescence analysis. In this work, the combined technique of preconcentration of rare earth ions is used. This technique consists of coprecipitation of metal hydroxides on the collector (iron (III) hydroxide) and dispersive liquid–liquid microextraction of their complexes with 1-(2-pyridylazo)-2-naphthol by chloroform in the presence of ethanol. The use of the developed hybrid approach allows simultaneous determination of the mentioned metals in mineral water in the range n(10^–2–10¹) μg/L. The results of analysis of Arkhyz and Rychal-Su mineral waters by the proposed extraction–X-ray fluorescent method are confirmed by the literature data, obtained by inductively coupled plasma mass spectrometry.     

Application of microemulsions for the extraction of <Emphasis Type="Italic">o</Emphasis>-phthalate esters from soil with subsequent separation of microemulsions,simultaneous preconcentration,and gas chromatographic analysis of target components

The possible application of microemulsions as extractants for the extraction of o-phthalate esters from soils with the subsequent breakdown of microemulsions, simultaneous preconcentration of dialkhylphthalates in the organic phase, and their following gas chromatographic analysis with mass-spectrometric detection is demonstrated. The preconcentration factor was 18. The method is characterized by low detection limits, good selectivity, and reproducibility.     

Separation of rare earth elements in the tributyl phosphate–Ln(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>–Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> system in the counter current process

The 40-step extraction process to separate rare earth elements (RЕEs) according to the praseodymium–cerium line with the use of mixer–settler extractors in a 100% TBP–Ln(NO₃)₃–Ca(NO₃)₂ system is implemented. A lanthanum–cerium concentrate containing less than 0.03 wt % of the remaining REEs is obtained. The flow diagram of the separation process of a rare earth (RE) concentrate isolated from phosphogypsum is considered.     

Direct Analysis of Natural Waters by Electron Spray Ionization and High-Resolution Time-of-Flight Mass Spectrometry Detection. Determination of Pesticides of Various Classes

The possibility of directly determining 36 pesticides (derivatives of urea, triazines, triazoles, imidazoles, carbamates, triazinones, benzamides, and pyridazinones and organophosphorus pesticides) by electrospray ionization with high-resolution quadrupole time-of-flight mass spectrometry in natural waters is demonstrated. A significant matrix effect is observed in the determination of pesticides in natural waters, and the use of the standard addition method is proposed for their determination in test samples, both undiluted and diluted with deionized water. The analytical range of the analytes was 0.5–50 ng/mL. The relative standard deviation of the results does not exceed 10%; the time required for the analysis is 10–15 min.     

Electronic properties of achiral and chiral gold nanotubes

The band structure of ten single-walled gold nanotubes of different radius and chirality angle have been calculated by the linearized augmented cylindrical wave method. For all tubes, the Fermi level crosses the half-filled band; therefore, the tubes are characterized by a metallic electronic structure. The band structure of the nanotubes changes relatively weakly with a change in nanotube structure. The valence band width for all the tubes is 9.1 eV. The density of states at the Fermi level remains unaltered with a change in chirality angle and decreases by 30% with an increase in radius from 3 to 12 Å.     

Effect of 3<Emphasis Type="Italic">d</Emphasis>-metal dopants on the electronic properties of hexagonal titanium dioxide nanotubes

The electronic structure of hexagonal TiO₂ nanotubes doped with 3d transition metals from Sc to Zn was calculated by the linearized augmented cylindrical wave method. The calculated densities of states demonstrate that the substitution of Sc, V, Co, Cu, or Fe atoms for a part of Ti atoms leads to the decrease in the band gap width of the material from 4 to 2 eV. Such nanotubes are promising materials for creation of electrodes for electrochemical photolysis of water.     

Complex-forming and ion-selective properties of bis(2-diphenylphosphorylalkyl)phenyl ethers of ethylene glycols. Crystal structures of cadmium complexes

New complexes of cadmium iodide with 1,3-bis[2-(diphenylphosphoryl)phenoxy]propane [CdL⁰I₂], 1,2-bis[2-(diphenylphosphorylethyl)phenoxy]ethane [CdL^{1, 2}I₂], and 1,8-bis[2-(diphenylphosphorylethyl) phenoxy]-3,6-dioxaoctane [CdL^{3, 2}I₂] are synthesized and their IR spectra and crystal structures are studied. Electroanalytical characteristics of membranes of ion-selective electrodes based on L⁰, L^{1, 2}, L^{3, 2}, and known crown ethers are compared for cations of alkali, alkaline-earth, and transition metals. Ligand L^{3, 2} is the first podand with terminal diphenylphosphoryl fragments to exhibit selectivity with respect to the cadmium cation.     

Phase equilibria in the Cu<Subscript>2</Subscript>S–La<Subscript>2</Subscript>S<Subscript>3</Subscript>–EuS system

Phase equilibria in the isothermal (970 K) and polythermal LaCuS₂–EuS, Cu₂S–EuLaCuS₃, LaCuS₂–EuLa₂S₄, and EuLaCuS₃–EuLa₂S₄ sections of the Cu₂S–La₂S₃–EuS system have been studied. EuLaCuS₃ (annealing at 1170 K) is of orthorhombic system, space group Pnma, a = 8.1366(1) Å, b = 4.0586(1) Å, c = 15.9822(2) Å, is isostructural to Ba₂MnS₃, and incongruently melts by the reaction EuLaCuS_3cryst (0.50 EuS; 0.50 LaCuS₂) ? 0.22 EuS SS (0.89 EuS; 0.11 LaCuS₂) + 0.78 liq (0.39 EuS; 0.61 LaCuS₂); ΔН = 52 J/g. The Cu₂S–La₂S3–EuS system has been found to contain five major subordinate triangles. At 970 K, tie-lines lie between EuLaCuS₃ and the Cu₂S, EuS, LaCuS₂, and EuLa₂S₄ phases and between the LaCuS₂ phase and the γ-La₂S₃–EuLa2S4 solid solution. Eutectics are formed between LaCuS₂ and EuLaCuS₃ at 26.0 mol % of EuS and T = 1373 K and between EuLaCuS3 and EuLa₂S₄ at 29.0 mol % of EuLa₂S₄ and T = 1533 K.