Drying of colloidal solutions of fluoroalkyl oligomers

The change in the supramolecular structure upon drying (solvent removal) of colloidal solutions of fluoroalkyl oligomers at atmospheric pressure has been studied using atomic force microscopy. In an initial colloidal solution, micrometer-sized particles of the dense phase consist of randomly oriented oligomers in the form of rigid rods of a 3–5 nm length forming a porous framework filled with solvent molecules, which solvate the oligomer chains. The drying-induced capillary pressure, which in nanosized pores is of the same order of magnitude as the solvation energy, leads to framework deformation, collapse of the pores, and the formation of lamellar and dendritic structures on a 50–100 nm scale. The ordering of these structures (formation of blocks of parallel oriented fibers typical of a fluoroplastic) increases as the heat-treatment temperature and the drying rate are increased, increasing the roughness of the surface (ratio of real to smooth surface area) and its hydrophobicity.     

Visualization of supramolecular framework of perfluorinated-oligomer colloid particles by supercritical drying

Aerogels of the tetrafluoroethylene radical polymerization products H(C₂F₄)_nR, where R is the radical formed by the abstraction of a hydrogen atom from a solvent molecule, have been obtained by replacing the solvent with supercritical CO₂ and its subsequent rapid evaporation. According to the data of scanning electron and atomic force microscopy, the aerogel consists of loosely bound particles of 1–3 μm in diameter, which is two to three times that of colloid particles in the initial solution, where the particles consist of an oligomer framework filled with solvent molecules. The internal structure of the framework is manifested in the surface topography with a roughness coefficient of 1.6–1.8. High roughness leads to the formation of ultrahydrophobic coatings with contact angles of >160°. A model of supercritical drying in which the solvent is removed from the colloidal particles without alteration of the supramolecular structure is discussed.     

Changes in luminescence of semiconductor colloidal quantum dots CdSe@CdS by replacement of hydrophobic ligands with 1-thioglycerol

Luminescent properties of CdSe@CdS colloidal quantum dots upon replacement of hydrophobic stabilizing ligands with water-soluble 1-thioglycerol have been studied. The data obtained have made it possible to optimize the ligand replacement procedure and significantly decrease the loss of the fluorescence quantum yield of the resulting hydrophilic quantum dots.     

Formation of benzenediols upon electron-beam distillation of lignin mixtures with alkanes

In the process of the electron-beam distillation of lignin, its conversion into benzenediols increases in the presence of alkanes in the irradiated sample. An increase in the yield of benzenediols is accompanied by a decrease in the fractions of guaiacol, creosol, ethylguaiacol, and vinylguaiacol in the tar distilled off. It has been noted that alkanes serve as an additional source of atomic hydrogen and alkyl radicals, which, in turn, play a key role in the formation of benzenediols. In the presence of alkanes in the irradiated sample, guaiacol can be the main precursor of catechols; the proportion of guaiacol in the tar is almost three times below that in the case of distillation of individual lignin. It has been hypothesized that the chain decomposition of lignin can occur with the participation of ?H and ?CH₃ radicals.     

Experimental study of gasification of vacuum residue in metal melt by alternating reactor feeding with carbonaceous feedstock and oxidant

Processes occurring in a metal melt during plasma-assisted melt gasification of carbonaceous feedstock have been studied in the mode of alternating feeding the reactor with the carbonaceous feedstock and oxidant. Vacuum residue was used as an oxygen-free carbonaceous material, and air and steam were used as an oxidant. The results of the study show that by alternating the carbonaceous-feedstock pyrolysis step and the step of carbon oxidation in the metal melt, it is possible to produce synthesis gas with any desired H₂/CO ratio.     

Conversion of hydrocarbon gases in dielectric barrier discharge in the presence of water

The conversion of C₁–C₄ hydrocarbons into gaseous and liquid products in a dielectric barrier discharge plasma in the presence of water has been studied. The formation of a deposit on the electrode surface is prevented by introducing water in the liquid state into a gaseous hydrocarbon stream, a finding that has been confirmed by IR spectroscopic study of the electrode surface. Hydrogen and C₂₊ hydrocarbons have been detected among the gaseous products of conversion, the liquid products being represented by C₆–C₁₀₊ alkanes. The total liquid products have amounted to 13.4, 26.0, or 36.6% for the methane, propane, or n-butane conversion, respectively. A 10% propane or butane admixture to methane increases the yield of the liquid products to make 22.0 and 31.7% for the methane–propane and the methane–butane mixture, respectively.     

The relationship between self-organization and membrane effects of aqueous dispersion systems of the thyroliberin oligopeptide

The relationship between rearrangement of the dispersed phase inducing considerable changes in the pH and nonmonotonic concentration dependences of membrane effects in aqueous systems of the endogenous regulatory peptide, thyroliberin (thyrotropin-releasing hormone), in 10^–3–10^–16 mol/L concentration range was demonstrated for the first time. The membrane structure modification in the 10^–13–10^–16 mol/L range was found to be due to accumulation of nanoassociates, while the oppositely directed pronounced structural changes in the 10^–6–10^–12 mol/L range may be associated with the coexistence and rearrangement of dispersed phases of various nature (domains and associates) whose action on membrane lipid components is regulated in this concentration range by the correlated changes in the dispersed phase parameters and pH.     

Supercomputer technologies for structural-kinetic study of mechanisms of enzyme catalysis: A quantum-chemical description of aspartoacylase catalysis

The results of modeling of the complete catalytic cycle of aspartoacylase-catalyzed N-acetylaspartate hydrolysis by the combined quantum mechanics/molecular mechanics method and with the use of umbrella sampling replica-exchange molecular dynamics simulations are reported. It has been shown that the decrease in the high-energy barriers of rate-limiting stages is achieved through the preceding equilibrium stages, such as proton transfer and conformational changes. General features of the catalytic behavior of enzymes have been formulated.     

Ammonolysis of magnesiothermic tantalum powders

Tantalum nitrides are synthesized by ammonolysis of a mesoporous magnesiothermic tantalum powders. The effect of specific surface area of the powders and synthesis temperature on product composition is shown. Nitrogen content in the ammonolysis product of tantalum powder with a specific surface area of 56 m² g^–1 corresponds to oxynitride TaON exposed to 600°C for 1 h. The specific surface area of the oxynitride is 35 m² g^–1.     

Complexation of uranium(VI) and europium(III) with new polydentate pincer ligands in aqueous systems

Coordination of uranyl ion with new polydentate ligands derived from amino acids and extraction of uranium(VI) and europium(III) from aqueous salt solution into poly(ethylene glycol) phase with the use of new polydentate pincer ligands has been studied.