Studies on amino acids and peptides-III. 2,4-bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane 2,4-disulfide,LR, as a new racemization free coupling reagent in peptide synthesis

The easily accessible 2,4-bis (4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane 2,4-disulfide, $\text{LR}$, has been reacted with salts of N-protected amino acids $\text{1}$ (Z-Gly-OH, Boc-Gly-OH, Boc-S-Ser(Bzl)-OH, Boc-S-Tyr(Bzl)-OH, Z-S-Arg(Z₂)-OH, and Z-S-Pro-OH), at room temperature in CH₂Cl₂ to give the intermediates $\text{2}$, mixed anhydrides. When $\text{2}$ is treated with two moles of a base and one mole of the salt of an amino acid ester $\text{3}$ (TosOH·H-Gly-OBzl, HCl·H-Gly-OBzl, HCl·H-Gly-OEt, and HCl·H-S-Phe-OtBu) at 0°C, the expected peptide $\text{4}$ is isolated in high yields. LR is also found to be a useful reagent in a fragment coupling between Z-Gly-S-Ala-OH and TosOH·H-S-Leu-OBzl). This tripeptide was tested by means of HPLC (deprotection and amino acid analysis according to Izumiya was not necessary), and no epimerization (<0.7 %) was observed.     

Nachweis von Oxalsäure in Leder

Zusammenfassung Der vonFeigl undFrehden beschriebene Nachweis von Oxalsäure durch Bildung von Anilinblau kann unmittelbar auf unvorbehandelten, ganz kleinen Lederproben ausgeführt werden und gestattet eine Schätzung des Oxalsäuregehaltes.

---

Summary The detection of oxalic acid by the formation of aniline blue, as described byFeigl andFrehden, can be performed on minute samples of leather which have not been treated previously. Thus, the oxalic acid content may be estimated.

---

Résumé Feigl etFrehden ont décrit une réaction, permettant de décéler l'acide oxalique par formation de bleu lumière. Cette réaction peut être exécutée sur de tout petits échantillons de cuir, n'ayant subit aucun traitement préalable; par son intensité elle permet une évaluation approximative de la teneur en acide oxalique.

     

The Study of the Extraction of Surface-Active Component of a Binary Liquid from Model (“Cylindrical”) Droplets

The dissolution of the droplets of a chlorobenzene and isopropanol mixture in water that filled the Hele-Shaw vertical cell is experimentally studied. The choice of a cylindrical shape for droplets, thus providing only one free (lateral) surface, makes it possible to use the interference method to obtain quantitative characteristics of the studied process. Information on arising flows is obtained by examining the motion of opaque emulsion formed at the interface during the dissolution of a mixture. The interrelation between various mass transfer mechanisms in the droplet as a function of the initial concentration of a mixture and the time of dissolution is discussed.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 3, 2005, pp. 357–362.Original Russian Text Copyright © 2005 by Kostarev.     

Specific Features of Glucoamylase Immobilization by Adsorption on Fibrous Polyelectrolytes

Some fundamental aspects of the immobilization of a hydrolytic enzyme glucoamylase via adsorption on aminocarboxylic ion-exchangers with fibrous structure were considered. The sorption capacity of amphoteric supports for the enzyme was studied in relation to the time of immobilization, concentration of hydrogen ions and the protein, and the ionic form of a polyelectrolyte. The catalytic properties of free and immobilized enzymes were compared.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 6, 2005, pp. 1003–1005.Original Russian Text Copyright © 2005 by Shkutina, Stoyanova, Selemenev.     

Polynuclear manganese grids and clusters—A magnetic perspective

High nuclearity paramagnetic, spin-coupled transition metal clusters and grids are fascinating chemists and physicists partly because of their structural beauty, and the challenge of creating them, but also because of their novel physical properties. Magnetic interactions between the spin centers are a primary focus. This review will examine a selection of Mn(II) polynuclear grids and clusters, with nuclearities in the range Mn₄ to Mn₉. Theoretical treatments of the magnetic properties are discussed, and approaches to solving the exchange problem for ‘large’ spin systems related to computational difficulties. A freely available software package (MAGMUN4.1) is presented as a means of dealing simply with spin-coupled clusters in general, and symmetry reduction methods are discussed briefly as a means of dealing with ‘large’ spin systems.     

Reactor for prechromatographic fusion reactions

An improved design of a reactor for alkaline fusion as a preliminary to chromatographic analysis is described. The reactor allows the use of a significantly reduced sample size, minimizes leakages and facilitates the removal of the reaction products. The use of the reactor is demonstrated by the analysis of several polyester samples exhibiting increased hydrolytic stability.     

Heavy metals in human urinary calculi

Summary Heavy metals are incorporated in human urinary calculi during a complex pathological process. The trace metals cadmium, lead, chromium, nickel and mercury are determined with regard to significance in pathogenesis and therapy. The amounts of cadmium, lead and chromium were determined as well directly in the solid sample as after chemical digestion by Zeeman-GFAAS. Both analyzing techniques show corresponding results. Nickel could be determined after chemical digestion only, while mercury was determined by a solid sampling technique. The evaluation of the results of trace metal analysis in the pilot study of 11 urinary calculi showed increased amounts of lead and cadmium compared to the results of tartar and salivary calculi.     

Structural equilibrium (S=0) ⇄ (S=1)and inversion of the configuration of the seven-membered saturated metal-containing ring in four-coordinate pyrazolealdiminate metal chelates of nickel(II) based on tetradentate ligands

¹H and¹³C NMR, x-ray structural analysis, and magnetic moment measurements have shown that in 5-thio(seleno)pyrazolealdiminate complexes of nickel(II) based on tetradentate ligands containing the fragment, with n=2, flattening of the chelate unit takes place in solution and in the solid state. A similar structure in which the diamine metal-containing ring has the twist-chair conformation is observed for the crystals of the complexes with n=4. For the complexes with n=4 in solution at a temperature below –50°C, rapid (on the NMR time scale) interconversion of the flattened (P) (S=0) and pseudotetrahedral (T) (S=1) structures is observed, not accompanied by inversion of the tetrahedral configuration of the metal atom. At temperatures above –50°C, in addition to the low-barrier reactions (T) (P), conversion of the seven-membered saturated metal-containing ring and inversion of the tetrahedral configuration of the Ni atom with activation barriers of 48–51 kJ/mole are observed.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 327–335, February, 1990.     

Simultaneous determination of p-hydroxylated and dihydrodiol metabolites of phenytoin in urine by high-performance liquid chromatography

Accurate urinary measurements of the two major metabolites of phenytoin, 5-(p-hydroxyphenyl)-5-phenylhydantoin (p-HPPH) and 5-(3,4-dihydroxy-cyclohexa-1,5-dienyl)-5-phenylhydantoin (dihydrodiol, DHD), are necessary for pharmacokinetic and drug-interaction studies of this commonly used antiepileptic drug. We describe a simple, rapid, acid hydrolysis, with liquid-liquid extraction and simultaneous isocratic reversed-phase high-performance liquid chromatography of p-HPPH and 5-(m-hydroxyphenyl)-5-phenylhydantoin (m-HPPH) (hydrolytic end product of DHD). p-HPPH and m-HPPH were quantitated against their separate respective internal standards of alphenal and tolylbarb. The mobile phase consisted of water-dioxane-tetrahydrofuran (80:15:5, v/v/v) at 2 ml/min and at 50 degrees C, with detection at 225 nm. Baseline separation was achieved by use of a 16 cm x 3.9 mm Nova-Pak C18 column and total analysis time of 12 min. p-HPPH and m-HPPH concentrations ranged from 10 to 200 and from 2 to 30 micrograms/ml, respectively, with between-day coefficients of variations of 3.3-4.5% and 2.2-5.1% for controls. All standard curves were linear with r values greater than 0.993. The DHD concentration was determined by multiplying m-HPPH concentrations by 2.3.     

Water in carbon nanotubes: adsorption isotherms and thermodynamic properties from molecular simulation

Grand canonical Monte Carlo simulations are performed to study the adsorption of water in single-walled (6:6), (8:8), (10:10), (12:12), and (20:20) carbon nanotubes in the 248-548 K temperature range. At room temperature the resulting adsorption isotherms in (10:10) and wider single-walled carbon nanotubes (SWCNs) are characterized by negligible water uptake at low pressures, sudden and complete pore filling once a threshold pressure is reached, and wide adsorption/desorption hysteresis loops. The width of the hysteresis loops decreases as pore diameter narrows and it becomes negligible for water adsorption in (8:8) and (6:6) SWCNs. Results for the isosteric heat of adsorption, density profiles along the pore axis and across the pore radii, order parameter across the pore radii, and x-ray diffraction patterns are presented. Layered structures are observed when the internal diameter of the nanotubes is commensurate to the establishment of a hydrogen-bonded network. The structure of water in (8:8) and (10:10) SWCNs is ordered when the temperature is 298 and 248 K, respectively. By simulating adsorption isotherms at various temperatures, the hysteresis critical temperature, e.g., the lowest temperature at which no hysteresis can be detected, is determined for water adsorbed in (20:20), (12:12), and (10:10) SWCNs. The hysteresis critical temperature is lower than the vapor-liquid critical temperature for bulk Simple Point Charge-Extended (SPCE) water model.