DISCRETE HUYGENS' MODELLING APPROACH TO WAVE PROPAGATIONS IN A HOMOGENEOUS ELASTIC FIELD

The application of the discrete Huygens' modelling has been discussed for acoustic wave propagation problems, in which the scalar wave field problems have been focused. The present paper extends the application of the modelling to the elastic wave propagation in a homogeneous elastic medium in which two types of waves, the longitudinal wave and the shear wave, are independent except at the boundary. Each wave can be treated like a scalar wave until the two waves reach the boundary where they couple so as to satisfy the displacement or stress boundary condition. We propose the approach confining ourselves to the two-dimensional field. Some examples are demonstrated, whose solutions are compared with the vectorial wave modelling and finite difference modelling solutions whenever they are available.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

Non-universal critical behaviour of heteronuclear dimers on a square lattice––A Monte Carlo study

Monte Carlo simulation within the grand canonical ensemble, the histogram reweighting technique, and finite size scaling analysis are used to explore the phase behaviour of heteronuclear dimers, composed of A and B type atoms, on a square lattice. We have found that for the models with attractive BB and AB nearest-neighbour energy, u_BB=u_AB=−1, and for non-repulsive energy between AA nearest-neighbour sites, u_AA<0, the system belongs to the universality class of the two-dimensional Ising model. However, when u_AA>0, the system exhibits a non-universal critical behaviour. We have evaluated the dependences of the critical point characteristics on the value of u_AA.     

VIBRATION AND STABILITY OF ANNULAR PLATES IN NON-LINEAR CREEP CONDITIONS

This paper presents a study on the influence of the physical non-linearity of material in creep conditions on vibration and stability of non-uniform annular plates subjected to a follower force radially distributed at the outer edge. The stability analysis requires first the calculation of a membrane stress distribution and then the application of the kinetic stability criterion, making use of small superposed vibrations. The differential equations of the membrane and vibration states have been integrated by means of the transfer matrix method which allowed the determination of the relationships between the real and imaginary parts of the complex frequency and compressive force (characteristic curves). The results have been presented in numerous figures.     

EXPRESSIONS FOR PREDICTING FUNDAMENTAL NATURAL FREQUENCIES OF NON-CYLINDRICAL HELICAL SPRINGS

Numerical and analytical studies are performed for the free vibration analysis of non-cylindrical (conical, barrel and hyperboloidal types) helical springs. The stiffness matrix method is used in the numerical analysis. A total of 12 degrees of freedom (six displacements and six rotations) is described for an element. The exact element stiffness matrix and the exact concentrated element inertia matrix are used in the formulation. The rotary inertia, the shear and extensional deformation effects are considered in the analysis. Comparison of the numerical results with the reported results obtained numerically and experimentally gives satisfactory values. After verification of the numerical frequencies, the non-dimensional fundamental frequencies of fixed-fixed non-cylindrical helical springs with circular section are expressed in a simple formula with a maximum absolute relative error of 5% using those numerical values for the constant helix pitch angles (5°, 10°, and 15°). These expressions restricted to the fundamental frequencies are also verified with ANSYS results.     

Dynamical Characteristics of Traveling Wave Packets of Total Electron Content Disturbances

Using the COPHASE method and the GPS interferometry method for travelling ionospheric disturbances, we analyze in detail the spatio-temporal properties of travelling wave packets (TWP) of total electron content (TEC) disturbances. The analysis is performed on the example of a clearest TWP manifestation observed in California, USA, in October 18, 2001, using the GLOBDET technique, developed at the Institute of Solar-Terrestrial Physics of the Siberian Branch of RAS for global detection and monitoring of natural and technogenic ionospheric disturbances on the basis of TEC variations retrieved from the global network of GPS receivers. In the time domain, TWPs are quasi-periodic TEC oscillations of duration about 1 h, period of 10–20 min, and amplitude exceeding that of the background TEC fluctuations by at least one order of magnitude. The velocity and direction of TWP motion are similar to those of mid-latitude mesoscale travelling ionospheric disturbances, as obtained earlier from the analysis of phase parameters of HF radio signals and the signals of geostationary satellites and discrete space radio sources.     

Temperature and junction-type dependency of Andreev reflection in MgB2

We studied the voltage and temperature dependency of the dynamic conductance of normal metal-MgB₂ junctions obtained either with the point-contact technique (with Au and Pt tips) or by making Ag-paint spots on the surface of MgB₂ samples. The fit of the conductance curves with the generalized BTK model gives evidence of pure s-wave gap symmetry. The temperature dependency of the gap, measured in Ag-paint junctions (dirty limit), follows the standard BCS curve with 2Δ/k_BT_c=3.3. In out-of-plane, high-pressure point-contacts we obtained almost ideal Andreev reflection characteristics showing a single small s-wave gap Δ=2.6±0.2 meV (clean limit).     

On the critical exponents of random k‐SAT

There has been much recent interest in the satisfiability of random Boolean formulas. A random k‐SAT formula is the conjunction of m random clauses, each of which is the disjunction of k literals (a variable or its negation). It is known that when the number of variables n is large, there is a sharp transition from satisfiability to unsatisfiability; in the case of 2‐SAT this happens when m/n → 1, for 3‐SAT the critical ratio is thought to be m/n ≈ 4.2. The sharpness of this transition is characterized by a critical exponent, sometimes called ν = ν_k (the smaller the value of ν the sharper the transition). Experiments have suggested that ν₃ = 1.5 ± 0.1. ν₄ = 1.25 ± 0.05, ν₅ = 1.1 ± 0.05, ν₆ = 1.05 ± 0.05, and heuristics have suggested that ν_k → 1 as k → ∞. We give here a simple proof that each of these exponents is at least 2 (provided the exponent is well defined). This result holds for each of the three standard ensembles of random k‐SAT formulas: m clauses selected uniformly at random without replacement, m clauses selected uniformly at random with replacement, and each clause selected with probability p independent of the other clauses. We also obtain similar results for q‐colorability and the appearance of a q‐core in a random graph. © 2002 Wiley Periodicals, Inc. Random Struct. Alg., 21: 182–195, 2002