Functionalization of the macropolyhedral borate anion cluster [B22H22]: isolation and characterization of the OH and OEt derivatives

Preparation and characterization of the first derivatives of the fused macropolyhedral anion [B₂₂H₂₂]²⁻ are reported. The species [B₂₂H₂₁OH]²⁻ (1) and [B₂₂H₂₁OEt]²⁻ (2) are obtained from workup of the products of the reaction between HgBr₂ and [NBzlEt₃]₂[B₂₂H₂₂]; a cluster involving the conjoining of a closo-B₁₂ icosahedron with a nido-B₁₀ cluster. Washing the products with ethanol followed by thin-layer chromatography allows the isolation of 1 and 2, reproducibly, in yields of 27 and 20%, respectively. The species were characterized by NMR spectroscopy, elemental analysis and X-ray diffraction studies. The crystal structure determinations of the two species identify novel features. Apparently the influence of the O atoms in the ions [B₂₂H₂₁OH]²⁻ and [B₂₂H₂₁OEt]²⁻ results in the lengthening of what was a gunwale B---B connection adjacent to the junction of the two cages such that the distances are 2.180 and 2.230 Å, respectively. These latter are longer than the corresponding distance in the parent species [B₂₂H₂₂]²⁻, which is 2.09 Å; quite long for a normal B---B distance. Thus it is assumed that these B atoms, in 1 and 2, one of which bears the substituent, are not bonded to each other.     

Solvent water tapes in two hydrates of μ‐oxo‐bis­[bis­(2,2′‐bipyridine‐κ2N,N′)(sulfato‐κO)iron(III)]

The title compound, [Fe₂O(SO₄)₂(C₁₀H₈N₂)₄], crystallizes as two different hydrates, viz. 11H₂O, (I), and 15H₂O, (II). The complex is binuclear, in which the two Fe^III atoms are coordinated in an octa­hedral geometry to four N atoms from the two bipyridine ligands, to one O atom from the sulfate ion and to an oxide ion on a twofold axis, which acts as a bridge between the symmetry‐related units. The Fe⋯Fe separation is 3.556 (4) Å and the Fe—O—Fe angle is 161.6 (2)° in (I); the corresponding values are 3.544 (1) Å and 165.8 (2)° in (II). In (II), one of the O atoms of the sulfate ion is disordered over two positions. In both compounds, the solvent water mol­ecules form slightly different one‐dimensional hydrogen‐bonded networks which pass along the c axis of the unit cell. In (I), three solvent water mol­ecules and, in (II), one solvent water mol­ecule, are situated on the twofold axis. In both (I) and (II), the central O atom of the metal complex lies on a twofold axis.     

Effect of surface attachment on synthesis of bacterial cellulose

Gluconacetobacter spp. synthesize a pure form of hydrophilic cellulose that has several industrial specialty applications. Literature reports have concentrated on intensive investigation of static and agitated culture in liquid media containing high nutrient concentrations optimized for maximal cellulose production rates. The behavior of these bacteria on semisolid and solid surfaces has not been specifically addressed. The species Gluconacetobacter hansenii was examined for cellulose synthesis and colony morphology on a range of solid supports, including cotton linters, and on media thickened with agar, methyl cellulose, or gellan. The concentration and chemical structure of the thickening agent were found to be directly related to the formation of contiguous cellulose pellicules. Viability of the bacteria following freezer storage was improved when the bacteria were frozen in their cellulose pellicules. This article was authored by a contractor of the US government under contract no. DEAC05-00OR22725. Accordingly, the US government retains a nonexclusive, royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US government purposes.     

Hydrodynamic and dynamo-optical properties and conformation of cyanoethyl cellulose molecules in solution

Translational diffusion, velocity sedimentation and viscosity in acetone as well as flow birefringence (FB) and viscosity in cyclohexanone have been investigated for cyanoethyl cellulose (CEC) with degree of substitution 2.6 in the range of M = (24.5?317) × 10³. The dependences of [ν], S_o and D_o on M were obtained. The value of the hydrodynamic constant is $\text{A}{}_0\text{= 3.27 × 10}{}^{\mathrm{?10}}\text{erg deg}{}^{\mathrm{?1}}\text{mol}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>3</mtext>}}$. According to hydrodynamic data, the equilibrium rigidity of CEC molecules is characterized by the length of the Kuhn segment $\text{A = 240 ? 350}\text{A}\text{?}$ and the coefficient of hindrance to intramolecular motion σ = 4.5-5.4. The hydrodynamic diameter of the chain is 8–14 Å. According to the FB data, the value of A is 260 Å. This value is in agreement with hydrodynamic data. The high value of optical anisotropy of the monomer unit, a_| - a_⊥ = 17.8 × 10^?25 cm³, is in agreement with the structure and anisotropy of the substituting groups, and the investigation of orientation angles of FB leads to the conclusion that, apart from high equilibrium rigidity, CEC in solution is characterized by considerable kinetic chain flexibility. The data for CEC are compared with the characteristics of other cellulose esters and ethers.     

A theoretical investigation of alpha-carbon kinetic isotope effects and their relationship to the transition-state structure of S(N)2 reactions

[reaction: see text] The transition structures and alpha-carbon 12C/13C kinetic isotope effects for 22 S(N)2 reactions between methyl chloride and a wide variety of nucleophiles have been calculated using the B1LYP/aug-cc-pVDZ level of theory. Anionic, neutral, and radical anion nucleophiles were used to give a wide range of S(N)2 transition states so the relationship between the magnitude of the alpha-carbon kinetic isotope effect and transition-state structure could be determined. The results suggest that the alpha-carbon 12C/13C kinetic isotope effects for S(N)2 reactions will be large (near the experimental maximum) and that the curve relating the magnitude of the KIE to the percent transfer of the alpha-carbon from the nucleophile to the leaving group in the transition state has a broad maximum. This means very similar KIEs will be found for early, symmetric, and late transition states and that one cannot use the magnitude of these KIEs to estimate transition-state structure.     

Polarography of disodium pentacyanonitrosylferrate(II): Part 2. Determination at Therapeutic Levels in Serum,Plasma, and Whole Blood

Disodium pentacyanonitrosylferrat(II) (sodium nitroprusside) is determined at therapeutic (ng ml^?1) levels in plasma, serum and blood with conventional and high-performance differential pulse polarography (d.p.p. and h.p.d.p.p.) at a dropping mercury electrode or a static mercury drop electrode. Serum or plasma (3 ml) is treated with perchloric acid containing 1 mg ml^?1 potassium hexacyanoferrate(II), centrifuged for 10 min and subjected to polarography. For spiked serum, calibration graphs are linear over the range 30–1000 ng ml^?1 sodium nitroprusside, regardless of the polarographic technique; the estimated detection limit is 15 ng ml^?1 (5 × 10^?8 M). Calculated therapeutic levels range from 100 to 1000 ng ml^?1. Similar results were obtained for spiked plasma. A similar procedure is suitable for whole blood and was used to study the in-vitro degradation of sodium nitroprusside (200 ng ml^?1) on incubation at 37°C. The in-vitro loss is rapid (t_{$\text{1}\text{2}$} ≈ 6 min) but meaningful in-vivo levels can be obtained when the blood is collected in a 0.9% sodium chloride solution at 0°C. Thiocyanate, the main metabolite of nitroprusside, and thiosulphate, which is a potential antidote for cyanide, do not interfere.     

Haloacrylic acids XI. Photochemical reactions of aliphatic aldehydes with methyl trifluoroacrylate

Photochemically initiated reactions of aliphatic aldehydes, namely acetaldehyde, propionaldehyde and butyraldehyde, with methyl trifluoroacrylate afforded γ-ketoesters of the type R-CO-CF₂CHF-COOCH₃ in the liquid phase. In the gas phase reaction further products were formed by addition of the aldehyde fragments to the olefinic bond of the methyl trifluoroacrylate.     

Glycosides of marine invertebrates. XXVI. Holothurin A from the Pacific Ocean holothurianHolothvria squamifera. Isolation of the native aglycone

The known triterpene tetraoside holothurin A has been isolated from the Pacific Ocean holothurianHolothuria squamifera. By using two independent methods — enzymatic cleavage and two-stage Smith degradation — 22,25-epoxyholost-9(11)-ene-3,12,17-triol, C₃₀H₄₆O₆, which is the native aglycone of holothurin A, was obtained. The structure of the native aglycone has been established on the basis of the results of IR, mass, and PMR spectroscopy.Pacific Ocean Institute of Bioorganic Chemistry, Far Eastern Scientific Center, Academy of Sciences of the USSR, Vladivostok. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 448–451, July–August, 1984.     

Gas-Chromatographic Determination of Alkyl Acetates in Aqueous Solutions with Chromatomembrane Gas Extraction

Methods were developed for the gas-chromatographic determination of alkyl acetates in aqueous solutions in the concentration range of 0.01–100 mg/L with the chromatomembrane gas extraction of analytes from a flow of the test liquid. The analytical potentialities of the direct-flow and counterflow techniques of chromatomembrane gas extraction were compared. It was demonstrated that the interfering effect of petroleum products on the results of analysis can be eliminated by using an additional chromatomembrane cell.     

Internal friction in cd+zn alloy single crystals

Internal friction measurements were used for the examination of Cd + Zn alloy single crystals. It was established that the interaction energy between solute Zn atoms and dislocations in basal planes is 0·12 eV.The authors thank Dr. P.Luká, CSc., for valuable discussions.