Characteristic features of carbazole phosphorescence quenching by benzophenone molecules in toluene at 77 K

We have studied the characteristic features of carbazole phosphorescence quenching by benzophenone in toluene at 77 K. We have shown that the decrease in the relative phosphorescence intensity for carbazole (energy donor) by a greater factor than we see for the relative change in its decay time is due to the fact that a change in the phosphorescence decay time occurs only for carbazole molecules participating in triplet-triplet energy transfer, while the substantial decrease in the phosphorescence intensity for carbazole with no change in the phosphorescence decay time is connected with quenching of its singlet states. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 554–556, July–August, 2006.     

Acoustic anisotropy and birefringence in fibre-reinforced composite materials

All nine elastic moduli of an orthotropic composite material, namely, polypropylene reinforced with glass fiber, are determined from the measured values of the bulk acoustic wave velocities along specific directions in the planes of symmetry of the material. These data are used to calculate the angular dependences of phase velocities, polarization vectors, and directions of ray velocities of bulk waves in the composite. It is demonstrated that the difference in the velocities of shear waves polarized along and across the glass fiber gives rise to an acoustic birefringence and can lead to an elliptical polarization of waves. The measurement of the phase velocities of shear waves as functions of the wave polarization is suggested as a method for the determination of the fiber orientation in a composite material.     

Modeling of the microwave drying process of aqueous dielectrics

We propose a thermodynamic framework for describing the microwave drying process of aqueous dielectrics based on Maxwell-Lorentz Field equations and mixture theory. Several issues are discussed such as the form of entropy equation; the constitutive relations for the macroscopic electric polarization vectors, Cauchy stresses, heat fluxes, internal momentum supplies, etc., for each component of the mixture: porous solid, water and gas in different regions; and the interfacial jump conditions between different regions in the mixture. A brief examination of the status of material frame indifference within the context of our framework is presented.     

Optical spectroscopy of Yb/Er codoped NaY(WO4)2 crystal

Erbium and ytterbium codoped double tungstates NaY(WO₄)₂ crystals were prepared by using Czochralski (CZ) pulling method. The absorption spectra in the region 290-2000 nm have been recorded at room temperature. The Judd-Ofelt theory was applied to the measured values of absorption line strengths to evaluate the spontaneous emission probabilities and stimulated emission cross sections of Er³⁺ ions in NaY(WO₄)₂ crystals. Intensive green and red lights were measured when the sample were pumped by a 974 nm laser diode (LD), especially, the intensities of green upconversion luminescence are very strong. The mechanism of energy transfer from Yb³⁺ to Er³⁺ ions was analyzed. Energy transfer and nonradiative relaxation played an important role in the upconversion process. Photoexcited luminescence experiments are also fulfilled to help analyzing the transit processes of the energy levels.     

Two-dimensional site-bond percolation as an example of a self-averaging system

The Harris-Aharony criterion for a static model predicts that if a specific heat exponent α>0, then this model does not exhibit self-averaging. In the two-dimensional percolation model, the index α= ?1/2. This means that, in accordance with the Harris-Aharony criterion, the model can exhibit self-averaging properties. We study numerically the relative variances R _M and R _χ for the probability M of a site belonging to the “infinite” (maximum) cluster and for the mean finite-cluster size χ. It was shown that two-dimensional site-bond percolation on the square lattice, where the bonds play the role of the impurity and the sites play the role of the statistical ensemble over which the averaging is performed, exhibits self-averaging properties.     

STM/AFM studies of the evolution of morphology of electroplated Ni/W alloys

The surface morphology evolution of Ni/W alloys was studied, as a function of the alloy composition. Using the modified plating baths developed in our laboratory recently, electroplated Ni/W alloys with different W content, in the range of 7–67 atom percent (a/o), can be obtained. This was found to lead to different structures, ranging from polycrystalline fcc-Ni type structure to amorphous, followed by orthorhombic with increasing W content in the alloy. Powder XRD was studied to determine the crystal structures. Ex situ STM, AFM and SEM were used to study in detail the surface morphologies of the different alloys, and their evolution with increasing W content.

The important findings are that a mixture of two crystalline forms can give rise to an amorphous structure. Hillocks that are usually a characteristic of epitaxial growth can also exist in the amorphous alloys. Oriented scratches caused by stress can also be formed.

Up to 20 a/o of W is deposited in the alloys in crystalline form, with the fcc-Ni type structure. Between 20 and about 40 a/o an amorphous structure is observed, and above that an orthorhombic crystal structure is seen, which is characteristic of the NiW binary alloy. Careful choice of the composition of the plating bath allowed us to deposit an alloy containing 67 a/o W, which corresponds to the composition NiW₂.     

Numerical simulation and experimental validation of heat transfer within rotating flows for three‐dimensional non‐axisymmetric,turbulent conditions

A control volume type numerical methodology for the analysis of steady three‐dimensional rotating flows with heat transfer, in both laminar and turbulent conditions, is implemented and experimentally tested. Non‐axisymmetric momentum and heat transfer phenomena are allowed for. Turbulent transport is alternatively represented through three existing versions of the k–ε model that were adjusted to take into account the turbulence anisotropy promoted by rotation, streamline curvature and thermal buoyancy. Their relative performance is evaluated by comparison of calculated local and global heat balances with those obtained through measurements in a laboratory device. A modified version of the Lam and Bremhorst, low Reynolds number model is seen to give the best results. A preliminary analysis focused on the flow structure and the transfer of heat is reported. Copyright © 2002 John Wiley & Sons, Ltd.     

Observation of hydrogen induced intermediate borides in PrFeB based alloys by Mössbauer effect spectroscopy

In the present work, a quantitative analysis of the phase compositions by Mössbauer effect spectroscopy of solid and conventional hydrogen disproportionated Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys was carried out. Significant amounts of intermediate borides t-Fe₃B and Pr(Fe, Co)₁₂B₆ were detected after solid hydrogen disproportionation treatment in Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys, respectively. After conventional hydrogenation–disproportionation–desorption–recombination treatment these phases were not detected and in no case residual Pr₂Fe₁₄B-phase was found. It was observed that the amount of intermediate borides after disproportionation can be correlated with the degree of texture after recombination at various temperatures.     

Stationary Mode and Binomial Moments for Networks of the Type [SM|GI|∞] r

By using methods of the Markov renewal theory, we find conditions for the existence of a stationary mode for multichannel networks with semi-Markov input stream. As a tool of stationary distribution analysis, we introduce multivariate binomial moments and investigate their asymptotic properties. For a multichannel queuing system with periodic input stream, we construct the generating function of the stationary distribution in explicit form in terms of the parameters of the system under consideration.     

Cooperative Strategies for Solving the Bicriteria Sparse Multiple Knapsack Problem

For hard optimization problems, it is difficult to design heuristic algorithms which exhibit uniformly superior performance for all problem instances. As a result it becomes necessary to tailor the algorithms based on the problem instance. In this paper, we introduce the use of a cooperative problem solving team of heuristics that evolves algorithms for a given problem instance. The efficacy of this method is examined by solving six difficult instances of a bicriteria sparse multiple knapsack problem. Results indicate that such tailored algorithms uniformly improve solutions as compared to using predesigned heuristic algorithms.