Optical properties of F.I.R. metallic grids: Reflection phase shift measurements

Utilization of metallic grids stacks for F.I.R filters needs a good knowledge of optical properties of each grid. We study here an experimental method in order to determine the wave's change of phase by reflection on a wire grid. We use a Perot-Fabry interferometer constituted by these grids.     

Differential determination of arsenic(III) and total arsenic using flow injection on-line separation and preconcentration for graphite furnace atomic absorption spectrometry

Arsenic(III) can be quantitatively extracted using sodium diethyldithiocarbamate (NaDDTC) as the complexing agent and C18 reversed phase packing as the column material for solid phase extraction. Arsenic(V) must be reduced to its trivalent oxidation state prior to extraction. A mixture of sodium sulphite, hydrochloric acid, sodium thiosulphate and potassium iodide was found to be optimum for on-line reduction. When the sorbent extraction is carried out without and with the addition of the reduction mixture, arsenic(III) and total arsenic can be determined sequentially by graphite furnace atomic absorption spectrometry with detection limits (3 σ) of 0.32 ng for As(III) and 0.43 ng for total arsenic. A 7.6-fold enhancement in peak area compared to direct injection of 40 μl samples was obtained after 60 s preconcentration. Results obtained for sea water standard reference materials, using aqueous standards for calibration, agree well with certified values. A precision of 5.5% RSD was obtained for total arsenic in a sea water sample (1.65 As). Results obtained for synthetic mixtures of trivalent and pentavalent arsenic agreed well with expected values.     

Conversion of single-stranded oligonucleotides into cloned duplexes and its consecutive application to short artificial genes.

A general method to convert single-stranded, chemically synthesized oligonucleotides into cloned duplexes is described. Oligonucleotides supplied with 3'-terminal extensions that are complementary to 3'-protruding ends obtained by certain restriction enzymes can be cloned either directly or with the help of an adapter molecule into double-stranded vectors. Two methods have also been developed for consecutive cloning applications. According to these methods, the synthetic oligonucleotides (and their enzymatically prepared complementary strands) are joined, one after the other, inside a cloning vector, each joining requiring one cloning step. Synthetic genes are thus built up from oligonucleotides corresponding to only one strand of the DNA. The sequential assembly of the cloned duplex takes place in the 5' to 3' direction. Each oligonucleotide is supplied with a four-nucleotide-long 3'-terminal extension, but this sequence is eliminated when the joining takes place, leaving no limiting sequence between the oligonucleotides. The two consecutive cloning methods, the adapter and the polycloning site methods, are illustrated by the assembly of short artificial genes.     

Peroxyoxalate chemiluminescence detection of condensates of malondialdehyde with thiobarbituric acids using a flow system.

The peroxyoxalate chemiluminescence(CL) detection method for the evaluation of the CL intensity of malondialdehyde(MDA) condensates with seven 2-thiobarbituric acid derivatives is described. The method consists of a flow injection technique together with a CL detection system using bis(2,4,6-trichlorophenyl) oxalate(TCPO) and hydrogen peroxide as chemiluminogenic reagents. Linear correlations between CL intensity and concentration are obtained for pmol levels of condensates. Among the condensates, 1,3-diethyl-2-thiobarbituric acid(DETBA)-MDA shows the largest CL intensity. High performance liquid chromatography (HPLC)/CL detection of DETBA-MDA and 1,3-diphenyl-2-thiobarbituric acid(DPTBA)-MDA using a mixture of TCPO and hydrogen peroxide in acetonitrile as a postcolumn reagent solution is also described. The detection limits for DETBA-MDA and DPTBA-MDA are 20 and 200 fmol, respectively, per 20 microL injection at a signal-to-noise ratio of 2. This HPLC/CL detection system was applied to the determination of MDA in rat brains by using DETBA as a fluorescent derivatizing reagent.     

Fluorides of ruthenium and chromium: Theoretical studies

The electronic and structural characteristics of CrF₅, CrF₄, RuF₅ and RuF₄ were studied. Ab initio (SCF-CI) calculations were performed with different structures and spin states for each complex. The favored conformation always corresponds to the highest multiplicity: doublet for CrF₅ in D_3h, triplet for CrF₄ in T_d, quadruplet for RuF₅ in C_4v and quintuplet for RuF₄ in D_4h symmetry.     

Transport of gases in aromatic polyesters: Correlation with WAXD studies

Polymer packing density can be conveniently measured by either density-based measurements (direct or estimated free volume) or wide-angle X-ray diffraction (WAXD) spectra. Previously reported diffusivity and permeability values for various polyarylates and polyimides are examined on the basis of the packing density measured by these different techniques. It is shown that in these rigid glassy polymers, the mean intersegmental distance, the d-spacing, obtained from WAXD provides a better measure of the effect of polymer packing on diffusivity than either direct density measurements or estimated free volumes. It has been possible to correlate previously reported diffusivity and sorption data for various polyarylates and polycarbonate on the basis of the WAXD investigation, using the d-spacing and the amorphous peak width, respectively. The effect of polyarylate structure on d-spacing has been studied. A series of polyarylates have been synthesized with different substituents on the bridge carbon. In this series the d-spacing remains constant while the carbonyl group density and the glass transition temperatures are varied. However, small substituents on the aromatic ring cause significant changes in the d-spacing. These results can be used to tailor polyarylates with desired intersegmental distances and chain flexibility.     

Study of the reciprocal space image of the biaxial nematic phase in the plane of the amphiphilic bilayer

High resolution synchrotron X-ray measurements have been performed on the uniaxial and biaxial phases of the lyotropic mixture potassuim laurate, decanol and water. An elegant magnetic orientational procedure allows us to obtain the cut of the reciprocal space image of the biaxial phase at the plane perpendicular to the amphiphilic bilayer. The analysis of densitometric profiles of the diffracted bands indicate an anisotropic micellar correlation in the plane of the amphiphilic bilayer. It is suggested that an anisotropic distribution of decanol and potassium laurate in this plane could be responsible for this effect.