Method of observation of low density interface states by means of X-ray photoelectron spectroscopy under bias and passivation by cyanide ions

X-ray photoelectron spectroscopy (XPS) measurements under bias can observe low density interface states for metal-oxide-semiconductor (MOS) diodes with low densities. This method can give energy distribution of interface states for ultrathin insulating layers for which electrical measurements cannot be performed due to a high density leakage current. During the XPS measurements, a bias voltage is applied to the rear semiconductor surface with respect to the ∼3 nm-thick front platinum layer connected to the ground, and the bias voltage changes the occupation of interface states. Charges accumulated in the interface states shift semiconductor core levels at the interface, and thus the analysis of the bias-induced shifts of the semiconductor core levels measured as a function of the bias voltage gives energy distribution of interface states. In the case of Si-based MOS diodes, the energy distribution and density of interface states strongly depend on the atomic density of silicon dioxide (SiO₂) layers and the interfacial roughness, respectively. All the observed interface state spectra possess peaked-structures, indicating that they are due to defect states. An interface state peak near the Si midgap is attributable to isolated Si dangling bonds at the interface, while those above and below the midgap to Si dangling bonds interacting weakly with Si or oxygen atoms in the SiO₂ layers. A method of the elimination of interface states and defect states in Si using cyanide solutions has been developed. The cyanide method simply involves the immersion of Si in KCN solutions. Due to the high Si-CN bond energy of ∼4.5 eV, the bonds are not ruptured at 800 °C and upon irradiation. The cyanide treatment results in the improvement of the electrical characteristics of MOS diodes and solar cells.     

Improvement of least-squares finite difference method on simulating slider air bearings in head disk systems

Least-squares finite difference (LSFD) method, one of mesh-free methods, is used to solve slider air bearings problem through discritizing the generalized Reynolds equation into nonlinear systems of algebraic equations. Two approximation schemes for the linearization of these equations are presented and compared. And, some new techniques to search supporting points for the reference node in the mesh-free method were proposed and explored. Therefore, these improvements eliminate some potential limitation of the LSFD method previously published and further facilitate its employment in complex slider models. Advanced step slider as an example of negative pressure sliders is simulated and verified using the improved LSFD mesh-free method in head disk systems.     

Spectral distributions in nuclei: General principles and applications

The subject of spectral distribution methods where one derives and applies the locally smoothed forms of observables in nuclei is briefly reviewed. It is well understood that the local forms (with respect to energy) of the level density function, expectation values and strength densities are Gaussian, linear (or ratio of Gaussians) and a bivariate Gaussian respectively. To accomodate symmetries in the above forms, one has to deal with multivariate distributions in general; for example the angular-momentum (J) decomposition leads to a bivariate Gaussian form for the level density. These results extend to indefinitely large spaces by method of partitioning and they generate convolution forms. The origin of these remarkable spectral properties is discussed and shell model examples are given to substantiate their applicability to nuclear systems. Spectral distribution theory is a practical, usable theory because the smoothed forms are defined in terms of traces of low particle-rank operators, and the trace information propagates. Finally we discuss the application of the spectral methods for a wide range of nuclear problems; these include binding energies, orbit occupancies, electromagnetic andβ-decay sum rule quantities, analysis of operators, symmetry breaking, numerical level densities, and determination of bounds on time-reversal non-invariant part of nucleon-nucleon interaction.     

Ferroelectric polarization switching in nylon-11

Cold-drawn Nylon-11 films, which were prepared by stretching the melt-quenched films to a draw ratio of 2.8: 1 at room temperature, were found to exhibit an electric displacement versus electric field hysteresis loop. The results confirmed that the Nylon-11 film exhibited ferroelectric behavior at or below room temperature. The coercive fields were 65, 98, 125, 160, and 215 MV/m at 20, 0, ?20, ?40, and ?60°C and the remanent polarization at ?20°C (where there was considerably less dc conduction) was 56 mC/m². Switching of the polarization was almost completed within 20 ms.     

X-ray scattering studies of the structure of aqueous hydroxy-propylcellulose solutions

X-ray diffraction studies have been undertaken on aqueous solutions of hydroxy propylcellulose (HPC) over a wide range of the scattering vector Q. The experiments revealed only modest differences in local structure on a distance scale ca. 5–300 Å despite the fact that they covered concentrations generally interpreted as ranging from the isotropic (35.1 wt %) to the anisotropic liquid crystalline (LC) phase (53.5 wt %). Several models were used to interpret the small-angle scattering data, and each gave similar structural parameters and extrapolated intensities ( Q → 0) for both solutions. Peaks were observed with d-spacings ca. 12–17 Å in both materials. Wide-angle x-ray scattering (WAXS) showed slightly increased local order over a size range ca. 5–20 Å for the anisotropic solution, and this is consistent with a greater intensity of the 13 Å peak in this material. It is difficult to reconcile these findings with an interpretation of the LC state involving major differences with the isotropic phase and a high degree of orientational order extending over long length scales.     

Taylor-Galerkin algorithms for viscoelastic flow: Application to a model problem

Coupled and decoupled Taylor-Galerkin algorithms are considered for viscoelastic flow and a model problem—transient startup Poiseuille flow in a channel under a fixed pressure gradient. All algorithms reproduce the steady-state solutions and are stable at high elasticity numbers (E). For a fixed mesh, the coupled and decoupled versions (TGC and TGD) give exceptional time-accuracy at low elasticity numbers [to within O(1%) at E = 1] and reasonable accuracy at high elasticity numbers [to within O(10%) at E = 10, 100]. By definition, the decoupled false-transient scheme (TGF), which uses different time scales for velocity and stress time stepping, provides a poor transient history. Where the main requirement is to compute a steady-state algorithm efficiency is crucial. The TGF scheme attains a steady state between six to eight times faster than does the TGC scheme, and the latter is over twice as fast as the TGD form. © 1994 John Wiley & Sons, Inc.     

Estimates of the singular numbers of Hankel operators

Translated from Matematicheskie Zametki, Vol. 49, No. 6, pp. 82–86, June, 1991.     

DICSI station at KCSR and NT: Determination of optimal requirements to the formation of an SR beam using cylindrical x-ray optical zoom lenses

To modernize the DICSI station, new hardware and software have been created according to the conditions of the operating storage ring “Sibir’-2” beam channel. The recording system has been successfully tested on the operating channel of the storage ring VEPP-3 (Budker Institute of Nuclear Physics Siberian Branch, Russian Academy of Sciences, Novosibirsk) using the time-resolved “diffraction cinema” technique in studying real biological objects in the static and dynamic modes of data accumulation. At the DICSI station, structural changes in medical and biological objects are permanently investigated. The specific structure dimensions of these objects are in the nanometric range.