Mixed-ligand metal complexes containing an ONS Schiff base and imidazole/benzimidazole ligands: synthesis,characterization, crystallography and biological activity

Salicylaldehyde-4-methylthiosemicarbazone (H₂MTSali) has been prepared via the condensation reaction of 4-methyl-3-thiosemicarbazide and salicylaldehyde. Four new mixed-ligand copper(II) and nickel(II) complexes with a general formula [M(MTSali)L] (M = Cu²⁺ or Ni²⁺; L = co-ligand) were synthesized, where L is either imidazole (im) or benzimidazole (bzim). The Schiff base and its mixed-ligand complexes were characterized by IR and UV/Vis spectroscopy, and the complexes by molar conductivity and magnetic susceptibility measurements. The spectroscopic data indicated that the Schiff base behaves as a tridentate ONS donor ligand coordinating via the phenoxide-oxygen, azomethine-nitrogen, and thiolate-sulphur atoms. Magnetic data indicate a square planar environment for the nickel(II) complexes while molar conductance values indicate that the metal complexes are essentially non-electrolytes in DMSO solution. X-ray crystallography shows Cu(MTSali)bzim (1) and Ni(MTSali)bzim (3) to be isostructural, with the metal(II) ions being coordinated by a N₂OS donor set that defines an approximate square planar geometry; in both cases, the benzimidazole is splayed with respect to the coordination plane. The copper(II) complexes were active against MDA-MB-231 and MCF-7 breast cancer cell lines, more so than H₂MTSali, whereas the nickel(II) complexes were inactive.     

Methanolic Extract of Piper sarmentosum Attenuates Obesity and Hyperlipidemia in Fructose-Induced Metabolic Syndrome Rats

Obesity and hyperlipidemia are metabolic dysregulations that arise from poor lifestyle and unhealthy dietary intakes. These co-morbidity conditions are risk factors for vascular diseases. Piper sarmentosum (PS) is a nutritious plant that has been shown to pose various phytochemicals and pharmacological actions. This study aimed to investigate the effect of PS on obesity and hyperlipidemia in an animal model. Forty male Wistar rats were randomly divided into five experimental groups. The groups were as follows: UG—Untreated group; CTRL—control; FDW—olive oil + 20% fructose; FDW-PS—PS (125 mg/kg) + 20% fructose; FDW-NGN—naringin (100 mg/kg) + 20% fructose. Fructose drinking water was administered daily for 12 weeks ad libitum to induce metabolic abnormality. Treatment was administered at week 8 for four weeks via oral gavage. The rats were sacrificed with anesthesia at the end of the experimental period. Blood, liver, and visceral fat were collected for further analysis. The consumption of 20% fructose water by Wistar rats for eight weeks displayed a tremendous increment in body weight, fat mass, percentage fat, LDL, TG, TC, HMG-CoA reductase, leptin, and reduced the levels of HDL and adiponectin as well as adipocyte hypertrophy. Following the treatment period, FDW-PS and FDW-NGN showed a significant reduction in body weight, fat mass, percentage fat, LDL, TG, TC, HMG-CoA reductase, and leptin with an increment in the levels of HDL and adiponectin compared to the FDW group. FDW-PS and FDW-NGN also showed adipocyte hypotrophy compared to the FDW group. In conclusion, oral administration of 125 mg/kg PS methanolic extract to fructose-induced obese rats led to significant amelioration of obesity and hyperlipidemia through suppressing the adipocytes and inhibiting HMG-CoA reductase. PS has the potential to be used as an alternative or adjunct therapy for obesity and hyperlipidemia.     

Formation of an in situ nanosilica nanomatrix via graft copolymerization of vinyltriethoxysilane onto natural rubber

Natural rubber (NR) with an in situ nanosilica nanomatrix was characterized in present work. The in situ nanosilica nanomatrix was prepared via graft copolymerization of a silane monomer, vinyltriethoxysilane (VTES), onto deproteinized NR (DPNR) in latex stage using tetrapentamine (TEPA)/tert‐butylhydroperoxide (TBHPO) as initiators. VTES conversion of more than 80% was obtained, and it depended on VTES concentration. The graft copolymer structure was characterized by Fourier transform infrared (FT‐IR), solution‐state proton nuclear magnetic resonance (¹H‐NMR), and solid‐state ²⁹Si‐NMR spectroscopy. FT‐IR analysis of the graft copolymer confirmed the formation of in situ silica particles, while solution‐state ¹H‐NMR and solid‐state ²⁹Si‐NMR revealed the partial hydrolysis of the ethoxy groups and polycondensation of the silanol groups. The formation of nanosilica particles enhanced thermal and mechanical properties of the graft copolymer. Morphology observations of the in situ nanosilica nanomatrix through scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated that the spherical nanosilica particles form a nanomatrix surrounding NR particle. The formation of the nanomatrix was proved to enhance mechanical properties for NR materials.     

Performance of Ni/10Sc1CeSZ anode synthesized by glycine nitrate process assisted by microwave heating in a solid oxide fuel cell fueled with hydrogen or methane

Journal of Solid State Electrochemistry - Nickel/scandia-ceria-stabilized-zirconia (Ni/10Sc1CeSZ) cermet is a potential anode for solid oxide fuel cells. The anode powder is prepared through a...     

Cytotoxicity and Apoptosis Effects of Curcumin Analogue (2E,6E)-2,6-Bis(2,3-Dimethoxybenzylidine) Cyclohexanone (DMCH) on Human Colon Cancer Cells HT29 and SW620 In Vitro

Colorectal cancer (CRC) is the third most common type of cancer worldwide and a leading cause of cancer death. According to the Malaysian National Cancer Registry Report 2012–2016, colorectal cancer was the second most common cancer in Malaysia after breast cancer. Recent treatments for colon cancer cases have caused side effects and recurrence in patients. One of the alternative ways to fight cancer is by using natural products. Curcumin is a compound of the rhizomes of Curcuma longa that possesses a broad range of pharmacological activities. Curcumin has been studied for decades but due to its low bioavailability, its usage as a therapeutic agent has been compromised. This has led to the development of a chemically synthesized curcuminoid analogue, (2E,6E)-2,6-bis(2,3-dimethoxybenzylidine) cyclohexanone (DMCH), to overcome the drawbacks. This study aims to examine the potential of DMCH for cytotoxicity, apoptosis induction, and activation of apoptosis-related proteins on the colon cancer cell lines HT29 and SW620. The cytotoxic activity of DMCH was evaluated using the [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] (MTT) cell viability assay on both of the cell lines, HT29 and SW620. To determine the mode of cell death, an acridine orange/propidium iodide (AO/PI) assay was conducted, followed by Annexin V/FITC, cell cycle analysis, and JC-1 assay using a flow cytometer. A proteome profiler angiogenesis assay was conducted to determine the protein expression. The inhibitory concentration (IC₅₀) of DMCH in SW620 and HT29 was 7.50 ± 1.19 and 9.80 ± 0.55 µg/mL, respectively. The treated cells displayed morphological features characteristic of apoptosis. The flow cytometry analysis confirmed that DMCH induced apoptosis as shown by an increase in the sub-G0/G1 population and an increase in the early apoptosis and late apoptosis populations compared with untreated cells. A higher number of apoptotic cells were observed on treated SW620 cells as compared to HT29 cells. Human apoptosis proteome profiler analysis revealed upregulation of Bax and Bad proteins and downregulation of Livin proteins in both the HT29 and SW620 cell lines. Collectively, DMCH induced cell death via apoptosis, and the effect was more pronounced on SW620 metastatic colon cancer cells, suggesting its potential effects as an antimetastatic agent targeting colon cancer cells.     

Chemically imaging the interaction of acetylated nanocrystalline cellulose (NCC) with a polylactic acid (PLA) polymer matrix

The non-covalent interaction of acetylated nanocrystalline cellulose (AC-NCC) with polylactic acid (PLA) in a composite blend has been studied at the micron scale by synchrotron Fourier transform infrared (FTIR) microspectroscopy. Microtomed sections of AC-NCC in PLA showed strong, localized carbonyl stretching (νC=O) absorbance characteristic of the cellulose acetylation, and this was observed on the surface of larger aggregated AC-NCC particles. A shift in the νC=O IR absorption peak of AC-NCC in PLA, relative to unblended AC-NCC was observed, which is indicative of an intermolecular interaction between AC-NCC and PLA matrix. Acetylation can therefore potentially improve the performance of the composite by enabling linkages between carbonyl groups, helping to establish a good stress transfer between the fiber and the matrix. This could in turn lead to a material with high yield elastic modulus. This is the first reported chemical imaging of acetylated nanocrystalline cellulose-based composite materials using synchrotron FTIR microspectroscopy.     

Understanding the effect of synthesis parameters on the catalytic ionic liquid hydrolysis process of cellulose nanocrystals

Conventional production of cellulose nanocrystals (CNC) normally encounters several problems including high energy consumption, toxicity and corrosion risk. Implementation of green solvent ionic liquid (IL) is an alternative to this conventional method. Production of CNC is known to be influenced by several factors such as reaction time and temperature. However, limited studies on the regeneration yield and other properties of CNC produced at both variables can be found. In this paper, CNC with desirable yield, crystallinity and particle size has been produced under catalytic hydrolysis process of IL. Two different parameters have been studied which are reaction temperature and time. It was found that, CNC with particle size of 9 nm and 73% crystallinity index has been produced at 30 min reaction time. Meanwhile, 100 °C reaction temperature manages to produce CNC with 90% yield and 76% crystallinity. In conclusion, reaction temperature and time affect the yield and thermal properties of hydrolysis process.     

Syntheses of three naturally occurring polybrominated 3,3′-bi-1H-indoles

The naturally occurring polybrominated indoles 2,2′,5,5′-tetrabromo-3,3′-bi-1H-indole, 2,2′,6,6′-tetrabromo-3,3′-bi-1H-indole, and 2,2′,5,5′,6,6′-hexabromo-3,3′-bi-1H-indole were synthesized using a palladium catalyzed, carbon monoxide mediated, double reductive N-heterocyclization of 2,3-bis(2-nitro-4(or 5)-bromophenyl)-1,4-butadienes as the key step.     

Synthesis of N-alkoxy-substituted 2H-benzimidazoles

Treatment of 2-nitro-N-(2-methyl-1-propen-1-yl)benzenamines with potassium tert-butoxide in tert-butanol followed by the addition of an electrophile affords N-alkoxy-2H-benzimidazoles. Electrophiles including methyl iodide, allylic bromides, propargylic bromides, benzyl bromide, and acetyl chloride gave good to excellent yields of product while 1-iodo- and 2-iodo-butane afforded very low yields.