A facile and green synthetic approach toward fabrication of starch-stabilized magnetite nanoparticles

A facile and green synthetic approach for fabrication of starch-stabilized magnetite nanoparticles was implemented at moderate temperature. This synthesis involved the use of iron salts, potato starch,sodium hydroxide and deionized water as iron precursors, stabilizer, reducing agent and solvent respectively. The nanoparticles(NPs) were characterized by UV-vis, PXRD, HR-TEM, FESEM, EDX, VSM and FT-IR spectroscopy. The ultrasonic assisted co-precipitation technique provides well formation of highly distributed starch/Fe_3O_4-NPs. Based on UV–vis analysis, the sample showed the characteristic of surface plasmon resonance in the presence of Fe_3O_4-NPs. The PXRD pattern depicted the characteristic of the cubic lattice structure of Fe_3O_4-NPs. HR-TEM analysis showed the good dispersion of NPs with a mean diameter and standard deviation of 10.68 4.207 nm. The d spacing measured from the lattice images were found to be around 0.30 nm and 0.52 nm attributed to the Fe3O4 and starch, respectively. FESEM analysis confirmed the formation of spherical starch/Fe_3O_4-NPs with the emission of elements of C, O and Fe by EDX analysis. The magnetic properties illustrated by VSM analysis indicated that the as synthesized sample has a saturation magnetization and coercivity of 5.30 emu/g and 22.898 G respectively.Additionally, the FTIR analysis confirmed the binding of starch with Fe_3O_4-NPs. This method was cost effective, facile and eco-friendly alternative for preparation of NPs.     

Computational approach for a pair of bubble coalescence process

The coalescence of bubbles has great value in mineral recovery and oil industry. In this paper, two co-axial bubbles rising in a cylinder is modelled to study the coalescence of bubbles for four computational experimental test cases. The Reynolds’ (Re) number is chosen in between 8.50 and 10, Bond number, Bo ∼4.25-50, Morton number, M 0.0125-14.7. The viscosity ratio (μ_r) and density ratio (ρ_r) of liquid to bubble are kept constant (100 and 850 respectively). It was found that the Bo number has significant effect on the coalescence process for constant Re, μ_r and ρ_r. The bubble-bubble distance over time was validated against published experimental data. The results show that VOF approach can be used to model these phenomena accurately. The surface tension was changed to alter the Bo and density of the fluids to alter the Re and M, keeping the μ_r and ρ_r the same. It was found that for lower Bo, the bubble coalesce is slower and the pocket at the lower part of the leading bubble is less concave (towards downward) which is supported by the experimental data.     

Chemoselectivity in the Kosugi-Migita-Stille coupling of bromophenyl triflates and bromo-nitrophenyl triflates with (ethenyl)tributyltin

Kosugi-Migita-Stille cross coupling reactions of (ethenyl)tributyltin with all isomeric permutations of bromophenyl triflate and bromo-nitrophenyl triflate were examined in order to determine the chemoselectivity of carbon-bromine versus carbon-triflate bond coupling under different reaction conditions. In general, highly selective carbon-bromine bond cross couplings were observed using for example bis(triphenylphosphine)palladium dichloride (2?mol-%) in 1,4-dioxane at reflux. In contrast, reactions using the same pre-catalyst but in the presence of a three-fold excess of lithium chloride in N,N-dimethylformamide at ambient temperature were in most cases selective for coupling at the carbon-triflate bond. Overall, isolated yields and the selectivity for carbon-bromine bond coupling were significantly higher compared to carbon-triflate bond coupling.     

Interfacial interactions in polymer-layered silicate nanocomposites

Interactions between sodium montmorillonite (Na-MMT) and a variety of probes, some of which are intended to model components of a polyurethane system, have been studied. Particular attention was given to the effect of preadsorbed water on the adsorption behavior of the probes. Flow microcalorimetry (FMC), diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), and wide-angle X-ray scattering (WAXS) were used to monitor the adsorption process. The probe set included alcohols, amines, ethers, poly(propylene glycol) monobutyl ethers (PPG), and 4-ethylphenyl isocyanate (4-EPI). FMC revealed that the preadsorbed water molecules on undried Na-MMT hindered the adsorption of alcohol and ether probes, but had little effect on the adsorption of amines. Drying of Na-MMT to less than 0.3% w/w H2O led to an increase in heat of adsorption and generally greater retention of the probes. PPG showed strong interaction with Na-MMT due to multipoint adsorption. With dried Na-MMT, WAXS revealed that PPG of molecular weight (MW) 1000 was partly intercalated into the gallery while lower molecular weight PPG (MW 340) did not intercalate the Na-MMT. DRIFTS spectra of 4-EPI adsorbed on undried Na-MMT revealed urea linkages, indicating formation of N,N'-bis(4-ethylphenyl) urea. In contrast, with dried Na-MMT the 4-EPI formed a urethane linkage with hydroxyl groups present at the edges of the silicate platelets.     

Development of multiplex loop mediated isothermal amplification (m-LAMP) label-based gold nanoparticles lateral flow dipstick biosensor for detection of pathogenic Leptospira

In recent years extensive numbers of molecular diagnostic methods have been developed to meet the need of point-of-care devices. Efforts have been made towards producing rapid, simple and inexpensive DNA tests, especially in the diagnostics field. We report on the development of a label-based lateral flow dipstick for the rapid and simple detection of multiplex loop-mediated isothermal amplification (m-LAMP) amplicons. A label-based m-LAMP lateral flow dipstick assay was developed for the simultaneous detection of target DNA template and a LAMP internal control. This biosensor operates through a label based system, in which probe-hybridization and the additional incubation step are eliminated. We demonstrated this m-LAMP assay by detecting pathogenic Leptospira, which causes the re-emerging disease Leptospirosis. The lateral flow dipstick was developed to detect of three targets, the LAMP target amplicon, the LAMP internal control amplicon and a chromatography control. Three lines appeared on the dipstick, indicating positive results for all representative pathogenic Leptospira species, whereas two lines appeared, indicating negative results, for other bacterial species. The specificity of this biosensor assay was 100% when it was tested with 13 representative pathogenic Leptospira species, 2 intermediate Leptospira species, 1 non-pathogenic Leptospira species and 28 other bacteria species. This study found that this DNA biosensor was able to detect DNA at concentrations as low as 3.95 × 10⁻¹ genomic equivalent ml⁻¹. An integrated m-LAMP and label-based lateral flow dipstick was successfully developed, promising simple and rapid visual detection in clinical diagnostics and serving as a point-of-care device.     

MHD Stagnation Point on Nanofluid Flow and Heat Transfer of Carbon Nanotube over a Shrinking Surface with Heat Sink Effect

This study is to investigate the magnetohydrodynamic (MHD) stagnation point flow and heat transfer characteristic nanofluid of carbon nanotube (CNTs) over the shrinking surface with heat sink effects. Similarity equations deduced from momentum and energy equation of partial differential equations are solved numerically. This study looks at the different parameters of the flow and heat transfer using first phase model which is Tiwari-Das. The parameter discussed were volume fraction nanoparticle, magnetic parameter, heat sink/source parameters, and a different type of nanofluid and based fluids. Present results revealed that the rate of nanofluid (SWCNT/kerosene) in terms of flow and heat transfer is better than (MWCNT/kerosene) and (CNT/water) and regular fluid (water). Graphically, the variation results of dual solution exist for shrinking parameter in range λc<λ≤−1 for different values of volume fraction nanoparticle, magnetic, heat sink parameters, and a different type of nanofluid. However, a unique solution exists at −1<λ<1, and no solutions exist at λ<λc which is a critical value. In addition, the local Nusselt number decreases with increasing volume fraction nanoparticle when there exists a heat sink effect. The values of the skin friction coefficient and local Nusselt number increase for both solutions with the increase in magnetic parameter. In this study, the investigation on the flow and heat transfer of MHD stagnation point nanofluid through a shrinking surface with heat sink effect shows how important the application to industrial applications.     

Lyophilised Platelet-Rich Fibrin: Physical and Biological Characterisation

Background: Platelet-rich fibrin (PRF) has gained popularity in craniofacial surgery, as it provides an excellent reservoir of autologous growth factors (GFs) that are essential for bone regeneration. However, the low elastic modulus, short-term clinical application, poor storage potential and limitations in emergency therapy use restrict its more widespread clinical application. This study fabricates lyophilised PRF (Ly-PRF), evaluates its physical and biological properties, and explores its application for craniofacial tissue engineering purposes. Material and methods: A lyophilisation method was applied, and the outcome was evaluated and compared with traditionally prepared PRF. We investigated how lyophilisation affected PRF’s physical characteristics and biological properties by determining: (1) the physical and morphological architecture of Ly-PRF using SEM, and (2) the kinetic release of PDGF-AB using ELISA. Results: Ly-PRF exhibited a dense and homogeneous interconnected 3D fibrin network. Moreover, clusters of morphologically consistent cells of platelets and leukocytes were apparent within Ly-PRF, along with evidence of PDGF-AB release in accordance with previously reports. Conclusions: The protocol established in this study for Ly-PRF preparation demonstrated versatility, and provides a biomaterial with growth factor release for potential use as a craniofacial bioscaffold.     

A study of the crystallinity index of polypropylene fibres

Crystallinity measurements were carried out with the help of X-ray diffraction, differential scanning calorimetry (DSC) and density measurements. The results of this study provide a better understanding of the morphology and complex thermal behaviour of polypropylene fibres. Crystallinity studies show that the crystallinity of PP fibres when measured by X-ray and DSC methods as a function of draw-ratios increases with increasing draw-ratios while the crystallinity of the same samples as derived by density measurements shows an inverse trend. These discrepancies are accounted for by the formation of microvoids within the polypropylene fibres due to drawing. In the DSC scan two endothermic peaks were found to occur in some of the samples. This is explained by the presence of two morphological forms i. e. lamellar and fibrillar morphology in the same sample. The crystallinity values obtained from different methods are correlated with mechanical properties, such as tenacity and elongations.Dedicated to Prof. Dr. H. Janeschitz-Kriegl, a pioneer of Polymer Physics in Austria, in honour of his sixtieth birthday.