Cytotoxicity of Shear Exfoliated Pnictogen (As,Sb, Bi) Nanosheets

The experimental achievement of phosphorene, which exhibits superior electronic, physical, and optical properties has spurred recent interest in other Group 15 elemental 2D nanomaterials such as arsenene, antimonene, and bismuthene. These unique and superior properties of the pnictogen nanosheets have spurred intensive research efforts and led to the discovery of their diversified potential applications; for instance, optical Kerr material, photonic devices, pnictogen-decorated microfibers, high-speed transistors, and flexible 2D electronics. Previous studies have mainly been dedicated to study the synthesis, properties, and applications of the heavy pnictogens nanosheets; however, the toxicological behaviour of these nanosheets has yet to be established. Herein, the cytotoxicity study of pnictogen nanosheets (As, Sb, and Bi) was conducted over 24 h of incubation with various concentrations of test materials and adenocarcinoma human lung epithelial A549 cells. After the treatment period, the remaining cell viabilities were obtained through absorbance measurements with WST-8 and MTT assays. These findings demonstrate that the toxicity of pnictogen nanosheets decreases down Group 15, whereby arsenic nanosheets are considered to be the most toxic, whereas bismuth nanosheets induce low cytotoxicity. The findings of this study constitute an important initial step towards enhancing our understanding of the toxicological effects of pnictogen nanosheets in light of their prospective commercial applications.     

Synthesis,characterization & in vitro antimicrobial‐antioxidant studies of novel N,1‐diphenyl‐4,5‐dihydro‐1H‐1,2,4‐triazol‐3‐amine derivatives

A new series of 1,2,4‐triazole was designed, synthesized, and characterized as remarkable antimicrobial and antioxidant agents. These heterocycles have been prepared from the cyclization reactions of Schiff bases 3 ( a‐k ) with phenylhydrazine by refluxing under the alkaline medium. The Schiff bases in turn were realized in good yields from the condensation reactions of N‐phenylurea with different aromatic aldehydes. The structures of the intermediates 3 ( a‐k ) and final heterocycles 4 ( a‐k ) have been fully characterized through their spectral parameters.     

Chemoselectivity in the Kosugi-Migita-Stille coupling of bromophenyl triflates and bromo-nitrophenyl triflates with (ethenyl)tributyltin

Kosugi-Migita-Stille cross coupling reactions of (ethenyl)tributyltin with all isomeric permutations of bromophenyl triflate and bromo-nitrophenyl triflate were examined in order to determine the chemoselectivity of carbon-bromine versus carbon-triflate bond coupling under different reaction conditions. In general, highly selective carbon-bromine bond cross couplings were observed using for example bis(triphenylphosphine)palladium dichloride (2?mol-%) in 1,4-dioxane at reflux. In contrast, reactions using the same pre-catalyst but in the presence of a three-fold excess of lithium chloride in N,N-dimethylformamide at ambient temperature were in most cases selective for coupling at the carbon-triflate bond. Overall, isolated yields and the selectivity for carbon-bromine bond coupling were significantly higher compared to carbon-triflate bond coupling.     

Electron-rich heteroaroylphosphonates and their reaction with trimethyl phosphite

Dialkyl heteroaroylphosphonates based on thiophene, pyrrole or furan have been prepared and their reactions with trimethyl phosphite investigated. Deoxygenation of the carbonyl groups in these heteroaroylphosphonates occurs to give carbene intermediates, which then undergo further reaction. In the case of the furan-3-oylphosphonates and those systems containing a thiophene or pyrrole ring, the major reaction pathway involves intermolecular trapping of the carbene intermediates by the trimethyl phosphite, leading to the formation of ylidic phosphonates that can be readily converted into the corresponding 1,1-bisphosphonates. However, in some furan-2-oylphosphonates the carbenes generated undergo ring-opening to initially give acyclic alkynylphosphonates which may react further to give other novel phosphorus compounds. The effects of substituents on the extent to which intermolecular trapping of the initially formed carbene competes with intramolecular rearrangement has been investigated. The latter process appears to be suppressed by a substituent at the 5-position of the furan ring, the resulting ylidic phosphonates being a rare example of an efficient intermolecular trapping of a furan-2-yl carbene.     

Interfacial interactions in polymer-layered silicate nanocomposites

Interactions between sodium montmorillonite (Na-MMT) and a variety of probes, some of which are intended to model components of a polyurethane system, have been studied. Particular attention was given to the effect of preadsorbed water on the adsorption behavior of the probes. Flow microcalorimetry (FMC), diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), and wide-angle X-ray scattering (WAXS) were used to monitor the adsorption process. The probe set included alcohols, amines, ethers, poly(propylene glycol) monobutyl ethers (PPG), and 4-ethylphenyl isocyanate (4-EPI). FMC revealed that the preadsorbed water molecules on undried Na-MMT hindered the adsorption of alcohol and ether probes, but had little effect on the adsorption of amines. Drying of Na-MMT to less than 0.3% w/w H2O led to an increase in heat of adsorption and generally greater retention of the probes. PPG showed strong interaction with Na-MMT due to multipoint adsorption. With dried Na-MMT, WAXS revealed that PPG of molecular weight (MW) 1000 was partly intercalated into the gallery while lower molecular weight PPG (MW 340) did not intercalate the Na-MMT. DRIFTS spectra of 4-EPI adsorbed on undried Na-MMT revealed urea linkages, indicating formation of N,N'-bis(4-ethylphenyl) urea. In contrast, with dried Na-MMT the 4-EPI formed a urethane linkage with hydroxyl groups present at the edges of the silicate platelets.     

Targeted Delivery of Anticancer Drug Loaded Charged PLGA Polymeric Nanoparticles Using Electrostatic Field

Pure positive electrostatic charges (PPECs) show suppressive effect on the proliferation and metabolism of invasive cancer cells without affecting normal tissues. PPECs are used for the delivery of drug-loaded polymeric nanoparticles (DLNs) capped with negatively charged poly(lactide-co-glycolide) (PLGA) and Poly(vinyl-alcohol) PVA into the tumor site of mouse models. The charged patch is installed on top of the skin in the mouse models' tumor region, and the controlled selective release of the drug is assayed by biochemical, radiological, and histological experiments on both tumorized models and normal rats' livers. It is found that DLNs synthesized by PLGA show great attraction to PPECs due to their stable negative charges, which would not degrade immediately in blood. The burst and drug release after less than 48h of this synthesized DLNs are 10% and 50%, respectively. These compounds can deliver the loaded-drug into the tumor site with the assistance of PPECs, and the targeted-retarded release will take place. Hence, local therapy can be achieved with much lower drug concentration (conventional chemotherapy [2 mg kg⁻¹] versus DLNs-based chemotherapy [0.75 mg kg⁻¹]) with negligible side effects in non-targeted organs. PPECs have many potential clinical applications for advanced-targeted chemotherapy with the lowest discernible side effects.     

Development of multiplex loop mediated isothermal amplification (m-LAMP) label-based gold nanoparticles lateral flow dipstick biosensor for detection of pathogenic Leptospira

In recent years extensive numbers of molecular diagnostic methods have been developed to meet the need of point-of-care devices. Efforts have been made towards producing rapid, simple and inexpensive DNA tests, especially in the diagnostics field. We report on the development of a label-based lateral flow dipstick for the rapid and simple detection of multiplex loop-mediated isothermal amplification (m-LAMP) amplicons. A label-based m-LAMP lateral flow dipstick assay was developed for the simultaneous detection of target DNA template and a LAMP internal control. This biosensor operates through a label based system, in which probe-hybridization and the additional incubation step are eliminated. We demonstrated this m-LAMP assay by detecting pathogenic Leptospira, which causes the re-emerging disease Leptospirosis. The lateral flow dipstick was developed to detect of three targets, the LAMP target amplicon, the LAMP internal control amplicon and a chromatography control. Three lines appeared on the dipstick, indicating positive results for all representative pathogenic Leptospira species, whereas two lines appeared, indicating negative results, for other bacterial species. The specificity of this biosensor assay was 100% when it was tested with 13 representative pathogenic Leptospira species, 2 intermediate Leptospira species, 1 non-pathogenic Leptospira species and 28 other bacteria species. This study found that this DNA biosensor was able to detect DNA at concentrations as low as 3.95 × 10⁻¹ genomic equivalent ml⁻¹. An integrated m-LAMP and label-based lateral flow dipstick was successfully developed, promising simple and rapid visual detection in clinical diagnostics and serving as a point-of-care device.     

Low temperature pyrolysis of carboxymethylcellulose

Unlike the common high temperature pyrolysis of carboxymethylcellulose (CMC) targeting activated carbon, this study investigates the pyrolytic behaviour of plain CMC at low temperatures ranging between 260 and 300 °C. Preliminary experiments were conducted using differential scanning calorimetry to define the temperature range necessary for the process. Low-temperature pyrolysis was then simulated using thermogravimetric analysis under inert atmosphere. Investigations reveal that a minimum holding temperature of 260 °C is required for an isothermal process, at which pyrolysis is terminated after around 26 min. Increasing exposure temperature reduces pyrolysis time. Within the range of the investigated sample and CMC particle size, no significant effects could be measured regarding the decomposition behaviour. The resulting char was further analysed using X-ray diffraction and Fourier transform infrared spectroscopy. Visual inspection was conducted using scanning electron microscopy. Upon pyrolysis, originally longitudinally shaped CMC was found to be converted into spherical particles of functionalised amorphous carbon with an average particle size of 41 µm.     

Development of Antibacterial,Degradable and pH-Responsive Chitosan/Guar Gum/Polyvinyl Alcohol Blended Hydrogels for Wound Dressing

The present research is based on the fabrication preparation of CS/PVA/GG blended hydrogel with nontoxic tetra orthosilicate (TEOS) for sustained paracetamol release. Different TEOS percentages were used because of their nontoxic behavior to study newly designed hydrogels’ crosslinking and physicochemical properties. These hydrogels were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and wetting to determine the functional, surface morphology, hydrophilic, or hydrophobic properties. The swelling analysis in different media, degradation in PBS, and drug release kinetics were conducted to observe their response against corresponding media. The FTIR analysis confirmed the components added and crosslinking between them, and surface morphology confirmed different surface and wetting behavior due to different crosslinking. In various solvents, including water, buffer, and electrolyte solutions, the swelling behaviour of hydrogel was investigated and observed that TEOS amount caused less hydrogel swelling. In acidic pH, hydrogels swell the most, while they swell the least at pH 7 or higher. These hydrogels are pH-sensitive and appropriate for controlled drug release. These hydrogels demonstrated that, as the ionic concentration was increased, swelling decreased due to decreased osmotic pressure in various electrolyte solutions. The antimicrobial analysis revealed that these hydrogels are highly antibacterial against Gram-positive (Staphylococcus aureus and Bacillus cereus) and Gram negative (Pseudomonas aeruginosa and Escherichia coli) bacterial strains. The drug release mechanism was 98% in phosphate buffer saline (PBS) media at pH 7.4 in 140 min. To analyze drug release behaviour, the drug release kinetics was assessed against different mathematical models (such as zero and first order, Higuchi, Baker–Lonsdale, Hixson, and Peppas). It was found that hydrogel (CPG2) follows the Peppas model with the highest value of regression (R² = 0.98509). Hence, from the results, these hydrogels could be a potential biomaterial for wound dressing in biomedical applications.